OVSAABLCR8

Amber PLCC4 Surface Mount LED with Domed Lens OVSAABLCR8 x x x x x x x High intensity with low power consumption White PLCC4 package with clear domed lens Wide viewing angle Packaged in 8 mm tape on 7” diameter reel Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process Amber (591 nm) Product Photo Here The OVSAABLCR8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic lights x Signal and symbol luminaire x Mono-color indicators x Backlighting (LCD, switches, displays, illuminated advertising) x Interior automotive lighting (instrumentation clusters) x Safety marker lights (steps, exit ways) Part Number Material Emitted Color Intensity Typ. mcd Lens Color OVSAABLCR8 AlInGaP Amber 1800 Water Clear 2.7 RoHS Moisture 1, 2, 3 CATHODE 4 ANODE DIMENSIONS ARE IN INCHES AND [MILLIMETERS]. DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A .1 04/06 Page 1 of 4 Amber PLCC4 SMD LED with Domed Lens OVSAABLCR8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -40 ~ +100° C Operating Temperature Range -40 ~ +100° C Soldering Temperature1 260° C Reverse Voltage 5V Continuous Forward Current 70 mA Peak Forward Current (10% Duty Cycle, PW ”—VHF 200 mA Power Dissipation 225 mW Note: 1. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL 2 PARAMETER MIN TYP MAX UNITS CONDITIONS IV Luminous Intensity 1120 1800 ---- mcd IF = 50 mA VF Forward Voltage ---- 2.6 3.2 V IF = 50 mA IR Reverse Current ---- ---- 10 µA VR = 5 V D Dominant Wavelength ---- 591 ---- nm IF = 50 mA P Peak Wavelength ---- 596 ---- nm IF = 50 mA 50% Power Angle ---- 60 ---- deg IF = 50 mA ½ Luminous Intensity (mcd) Standard Bins (IF = 50 mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSAABLCR8 may be filled with any or all bins contained as below. 2800 2240 X2 1800 XQ 1400 W2 1120 W1 584 596 Luminous intensity is at W1 bin or above. Dominant Wavelength ( D) Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 0406 Page 2 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Amber PLCC4 SMD LED with Domed Lens OVSAABLCR8 Typical Electro-Optical Characteristics Curves V µA mA V Forward Current vs Forward Voltage Reverse Current vs Reverse Voltage Half Power WL = 20 nm Domi WL = 591 nm 2.5 100 2.0 75 1.5 % 50 % 1.0 25 0.5 0.0 0.0 20.0 40.0 60.0 80.0 100.0 mA Relative Luminous Intensity vs Forward Current 0 400 500 600 700 800 nm Relative Luminous Flux vs Wavelength 50% Power Angle: 120° mA °C Maximum Forward DC Current vs Ambient Temperature Spatial Distribution OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue A .1 04/06 Page 3 of 4 Amber PLCC4 SMD LED with Domed Lens OVSAABLCR8 Reel Dimensions: 7-inch reel Carrier Tape Dimensions: Loaded quantity 700 pieces per reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A .1 0406 Page 4 of 4 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com