CA3106E20-15SB15

Datasheet for part number CA3106E24A24S-B-02 Our Catalog Part Number: CA3106E24A24S-B-02 Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET Product Datasheet Bayonet Shell Style Endbell Style Gender Shell Size Contact Arrangement Number of contacts Contact Type Contact Plating Shielding Contact Rating at +20 °C (68 °F) (Size 25/12) Contact Resistance (Size 25/12) Wire Cross Section Operating Voltage Insulator Resistance Test Voltage Air and Creepage Paths (Min) Ambient Temperature Safety Provisions Salt Spray Resistance Mating Cycles Sep. Force per Contact (Size 25/12) Gauge Coupling Torque Contact Retention (Size 25/12) Shell Material Shell Plating Insulator and Grommet Material Contact Material Connector with bayonet coupling Plug, straight Endbell for heatshrinkable boots Socket 24 24A24 12 contacts size 12 AWG Crimp Hard silver no 41 A 3 mΩ AWG 14/12 In case of voltages greater than 50V the connector must be used in accordance with DIN VDE part 410, IEC 60364-4-41. Acc. To VG95319, part 2, test no. 5.12 and VG95210, part 32, test conditions B, standard insulator material > 1000 MΩ 2000 Vrms 1,1 mm Standard insulator material -55°/+125°C (-67/257°F) IP67 acc. to DIN 40 050 and IP68 (1 bar pressure for 16h) 500 hours salt spray resistant 500 min 1,5 N For infos on Gauge please see catalog VG95234, part 1 Closing: 14 Nm max / Opening: 0,8 Nm min 55 N Aluminium alloy Olive drab chromate over cadmium plating (conductive) CR-Elastomere Copper alloy Harnessing Info: Contact Cross-Section See assembly instruction Harnessing Info: Insulator Diameter See assembly instruction Wire Stripping (Size 25/12) General Info 6,2 mm All tests in accordance with VG95319 and/or if applicable with VG95210 Specifications and dimensions subject to change. Page 1 of 1