MDM-BT-51TE-SJS

ITT Cannon Accessories Micro Metal Backshell For MDM connectors Shielded metal backshell .634 (16.1) .378 (9.6) .138 (3.5) Top Entry A single piece, machined aluminum shell for ITT Cannon MDM connectors. Cable braid can be fixed to the shell with the band-it strap (supplied with the backshell) to give a shielded termination. Stainless steel mounting hardware, either jackposts or low profile jack screws, comes with the backshell. 45° Entry .063 (1.6) Materials and Finishes Backshell Material: Aluminum Backshell Finish: Electroless Nickel or Yellow Chromate over Cadmium Hardware Material: Stainless Steel Side Entry Shell Size 9 15 21 25 31 37 51 100 A 0.776 (19.7) 0.921 (23.4) 1.075 (27.3) 1.175 (29.9) 1.327 (33.7) 1.476 (37.5) 1.421 (36.1) 2.165 (55.0) B C 0.565 (14.4) 0.354 (9.0) 0.715 (18.2) 0.354 (9.0) 0.865 (22.0) 0.354 (9.0) 0.965 (24.5) 0.354 (9.0) 1.115 (28.3) 0.354 (9.0) 1.265 (32.1) 0.354 (9.0) 1.215 (30.9) 0.394 (10.0) 1.800 (45.7) 0.433 (11.0) D E F 0.394 (10.0) 0.472 (12.0) 0.551 (14.0) 0.630 (16.0) 0.669 (17.0) 0.709 (18.0) 0.748 (19.0) 0.827 (21.0) 0.591 (15.0) 0.650 (16.5) 0.709 (18.0) 0.787 (20.0) 0.827 (21.0) 0.866 (22.0) 0.906 (23.0) 0.984 (25.0) 0.827 (21.0) 0.906 (23.0) 0.984 (25.0) 1.063 (27.0) 1.102 (28.0) 1.142 (29.0) 1.181 (30.0) 1.496 (38.0) MDM-BT-15TE-SJS-CAD- *** Band tied backshell Shell size Cable entry TE = top entry AE = angled (45°) entry SE = side entry Harware SJS = spring clips and jackscrews JP = jackposts Plating blank - electroless nickel CAD - yellow chromate over cadmium Modification code Smaller cable entry - consult factory Styles TE & SE J K 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.268 (6.8) 0.307 (7.8) 0.276 (7.0) 0.425 (10.8) 0.425 (10.8) 0.598 (15.2) 0.598 (15.2) 0.791 (20.1) 0.898 (22.8) 1.024 (26.0) Style AE J K 0.189 (4.8) 0.189 (4.8) 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.228 (5.8) 0.268 (6.8) 0.307 (7.8) 0.189 (4.8) 0.189 (4.8) 0.276 (7.0) 0.425 (10.8) 0.425 (10.8) 0.598 (15.2) 0.697 (17.7) 1.024 (26.0)