G080.010A101

Special Encoders & Sensors Contact encoder, surface mount housing Impulse ratio 1 rev. = 15 impulses up to 5 rev. = 1 impulse G 080 Features – Encoder with mechanical contact – As trigger for electromechanical counters – Impulse voltage 12...230 VAC/VDC – Surface mount housing (for measuring wheel) – Ratio up to one revolution = 15 impulses – Reduction ratio up to 5 revolutions = 1 impulse – High switching capacity – Sturdy design G 080 surface mount housing Technical data - electrical ratings Voltage supply Resolution (steps/turn) Operating mode Contact load Sensing method Output frequency Output signals 12...220 V 0.2...15 Pulse emission in both rotational directions ≤30 W (100 VA) ≤230 V (approx. 2 A) Mechanic ≤0.025 kHz Contact Technical data - mechanical design Housing Shaft Protection DIN EN 60529 Operating speed Starting torque Material Operating temperature Relative humidity Weight approx. E-connection ø73 mm ø7 mm (sinter bronze slide bearing) IP 52 ≤1500 rpm ≤0.02 Nm IP 30 Housing: GFV Polycarbonat -10...+60 °C 95 % non-condensing 250 g Cable 1 www.baumerivo.com www.baumerivo.com 29/10/2008 Subject to modification in technic and design. Errors and omissions excepted. Contact encoder, surface mount housing Impulse ratio 1 rev. = 15 impulses up to 5 rev. = 1 impulse Special Encoders & Sensors G 080 Part number G 080.0 Pulse per rotation 1 rev. = 1 impulse contact cams impulse/interval 1:1 1 rev. = 2 impulses contact cams of several parts 1 rev. = 5 impulses contact cams of several parts 2 rev. = 1 impulse contact cams impulse/interval 1:1 5 rev. = 1 impulse contact cams impulse/interval 1:1 10A101 10A202 10A205 20A110 20A113 Supplied with PG9 gland and 0.3 m cable 2 x 1 mm. G 080 is a mechanically-operated encoder providing a surface mount housing. Mechanical rotary movements are converted into impulses by interrupted contact resulting in the existing circuit opening or closing. Impulse ratios are available within the range of 1 turn = 15 impulses up to max. 32 turns. Dimensions 63 35 28 ø7h8 ±0.15 64 17 50 ±0.15 2 www.baumerivo.com 29/10/2008 Subject to modification in technic and design. Errors and omissions excepted. 73 2.5 10 5.4 105 ±0.15 118 5 34.5