0850BM14E0016T

High Frequency Ceramic Solutions Sub-GHz Impedance Matched Balun + LPF integrated Passive Component for Texas Instruments' CC1310, CC1312 Chipsets Detail Specification: P/N: 0850BM14E0016 9/9/2021 Page 1 of 5 Do you need a small 900MHz antenna? Go to: https://www.johansontechnology.com/antennas General Specifications 0850BM14E0016 Part Number Frequency (MHz) 770 - 860 Unbalanced Impedance (Ω) 860 - 928 50 Balanced Impedance (Ω) Impedance matched to Texas Instruments' CC1310, CC1312 chipsets Insertion Loss (dB) 1.3 typ. (1.6 max.) 1.8 typ. (2.2 max.) Return Loss (dB) 9.5 min. 9.5 min. Phase Difference (deg) 180±17 180±15 3.5 max. 2.0 max. Amplitude Difference (dB) 8 min.@ 1540 - 1720MHz 15 min.@ 1720 - 1736MHz 15 min.@ 1736 - 1856MHz 30 min.@ 2310 - 2580MHz 30 min.@ 2580 - 2784MHz 33 min.@ 3080 - 3440MHz 35 min.@ 3440 - 3712MHz Attenuation (dB) Power Capacity (W) Texas Instruments - Approved! Reel Quantity (pcs/reel) 4,000 Operating Temperature -40°C to +85°C Recommended Storage Conditions and Period for unused Product on T&R 2 max. (CW) +5 to +35 °C Humidity 45 - 75%RH 18 mos. max For more TI matched balun-filters, go to: https://www.johansontechnology.com/ti Part Number Explanation P/N Suffix Packaging Style Bulk (loose pcs.) Suffix = S eg. 0850BM14E0016S T&R Suffix = T eg. 0850BM14E0016T 100% Tin Suffix = None eg. 0850BM14E0016(T or S) Mechanical Dimensions Terminal Configuration In mm L 0.063 ± 0.004 1.60 ± 0.10 W 0.031 ± 0.004 0.80 ± 0.10 T 0.024 ± 0.004 0.60 ± 0.10 a 0.008 ± 0.004 0.20 ± 0.10 b 0.008 +.004/-.008 0.20 +0.1/-0.2 c 0.006 ± 0.004 0.15 ± 0.10 g 0.012 ± 0.004 0.30 ± 0.10 p 0.020 ± 0.002 0.50 ± 0.05 W c L Bottom p a No. Function 1 Unbalanced Port 2 RX/TX 3 Balanced Port RF_N 4 Balanced Port RF_P 5 GND 6 GND    T g b Side    Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.4 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions Sub-GHz Impedance Matched Balun + LPF integrated Passive Component for Texas Instruments' CC1310, CC1312 Chipsets Detail Specification: P/N: 0850BM14E0016 9/9/2021 Page 2 of 5 Equivalent L/C Circuit Integrated into IPC DC blocking cap not integrated* Impedance matched to Texas Instruments' CC1310 chipset Approximate equivalent L/C integration for 0850BM14E0016 *Even though Pins 3, 4, and 1 are internally DC blocked from GND, Pins 3/4 are DC coupled to Pin 1 (there’s a DC path between them). We recommend the designer place a DC blocking cap (68-100pF) in series after Pin 1 (between IPC and antenna). Would you like the reference design, schematic, and gerber files? Need us us to review your layout for free or an antenna recommendation for your application? Contact us at: https://www.johansontechnology.com/ask-a-question Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.4 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions Sub-GHz Impedance Matched Balun + LPF integrated Passive Component for Texas Instruments' CC1310, CC1312 Chipsets Detail Specification: P/N: 0850BM14E0016 9/9/2021 Page 3 of 5 Pad-Soldermask Guidelines Request reference design, schematic, and gerber files at: https://www.johansontechnology.com/ask-a-question GND * * Solder Resist Land Through-hole (φ 0.35) 0.25mm 0.55mm (0.6mm max.) Vias are important for proper harmonic attenuation! 0.6mm 0.45mm * Even though Pins 3, 4, and 1 are DC blocked from GND, Pins 3/4 are DC coupled to Pin 1 (there’s a DC path between them). We recommend the designer place a DC blocking cap (68-100pF) in series after Pin 1 (between IPC and antenna) per page 2 of the datasheet. * Line width should be designed to match 50ohm characteristic impedance, depending on PCB material and thickness. Grounded CPWG is recommended. Measurement Diagram Port 2* Network Analyzer** Port 4* Port 1(50 Ω) Port 3** GND GND Port 1:Unbalanced Port Ports 2 and 4: Balanced Port *Ports 2 and 4 Terminate impedance =Conjugate match to TI CC13XX chipset Port 3: RX_TX Port **Port 3 Terminate impedance =The load Impedance looking into RX_TX pin of TI CC13XX chipset IL=SDS21 RL=SSS11 Amp_balance = dB(S(2,1)/S(4,1)) Phase_balance = Phase(S(2,1)/S(4,1)) Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.4 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions Sub-GHz Impedance Matched Balun + LPF integrated Passive Component for Texas Instruments' CC1310, CC1312 Chipsets P/N: 0850BM14E0016 9/9/2021 Detail Specification: Page 4 of 5 Typical Electrical Characteristics (T=25°C) The Sds21 resonance around 1.8GHz was puposefully designed due to an impedance reactance with he CC13XX for proper harmonic power level. Insertion Loss, Return Loss 0 -10 Sss11 Sds21 Sdd22 -20 -30 -40 -50 -60 0.5 1.5 2.5 3.5 4.5 freq, GHz 4.0 200 2.5 100 1.0 0 -0.5 -100 -2.0 Phase_diff Amp_diff Phase Difference, Amplitude Balance -200 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 freq, GHz Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.4 2021 Johanson Technology, Inc. All Rights Reserved High Frequency Ceramic Solutions Sub-GHz Impedance Matched Balun + LPF integrated Passive Component for Texas Instruments' CC1310, CC1312 Chipsets Detail Specification: P/N: 0850BM14E0016 9/9/2021 Page 5 of 5 Application Notes, Layout Files, and more https://www.johansontechnology.com/ti Small SMD 433MHz (or 900M, 2.4G, 5G) antennas https://www.johansontechnology.com/antennas RoHS Compliance https://www.johansontechnology.com/rohs-compliance Soldering Information https://www.johansontechnology.com/ipcsoldering-profile Antenna layout and tuning techniques https://www.johansontechnology.com/tuning Antenna layout review, tuning, and characterization services https://www.johansontechnology.com/ipc-antenna-services MSL Info https://www.johansontechnology.com/msl-rating Recommended Storage Condition and Max Shelf Life https://www.johansontechnology.com/recommended-storage-conditions Packaging information https://www.johansontechnology.com/tape-reel-packaging Johanson Technology, Inc. reserves the right to make design changes without notice. All sales are subject to Johanson Technology, Inc. terms and conditions. https://www.johansontechnology.com 4001 Calle Tecate • Camarillo, CA 93012 • TEL 805.389.1166 FAX 805.389.1821 Ver. 2.4 2021 Johanson Technology, Inc. All Rights Reserved