C4AQOLU4150P11J

Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Overview Applications The C4AQ-P capacitor is a polypropylene metallized film capacitor with a rectangular, plastic box-type design filled with resin, and uses 2 or 4 tinned wires. Typical applications include DC filtering, DC link, power electronics, energy storage, renewable energy grid interface, motor drives, and automotive applications. Automotive grade devices meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements with longer life performances at 125°C. Benefits • Long life at 125°C • Self-healing • Low loss • Low ESL • Low profile dimensions available • High ripple current • High dV/dt • High capacitance density • High contact reliability • Suitable for high frequency applications • Automotive Grades (AEC-Q200) Part Number System C4 A Q Q B W 5270 P Series Type Application Rated Voltage (VDC) Case Terminals Code Capacitance Code (pF) Release C4 = MKP power capacitors A= Box, wire terminals Q= DC link Automotive Grade U = 2 pins W = 4 pins Digits 2 – 4 indicate the first three digits of the capacitance value. First digit indicates the number of zeros to be added. G = 450 H = 600 J = 700 O = 900 Q = 1,100 B, E = Box plastic case L = Low Profile box, plastic case 3 N J Lead Size Code: Diameter Tolerance B x H x L (mm) (mm) 1 = 0.8 P = Long performance 2 = 1.0 life at 125°C 3 = 1.2 See dimensions table below for valid case sizes J = 5% K = 10% Built Into Tomorrow © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 1 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Series Selection DC-LINK, DC FILTER TREE FAMILY DC-LINK, DC Filter Automotive Rated LIFE AT MAX. TEMP. | C/C0|≤5% ROBUSTNESS | C/C0|≤5% DC-LINK SERIES 2,000 hours 200 hours THB 3,000 hours 1,000 hours 4,000 hours (4,000 hours at 125°C) 60°C / 95% RH 85°C / 85% RH 85°C / 85% RH 60°C / 95% RH 85°C / 85% RH 1,000 hours at VR 1,000 hours at VR 1,000 hours at VR 1,000 hours at VR 1,000 hours at VR C4AQ-P C4AK High Ripple High Ripple High dv/dt High dv/dt C4AQ C4AQ-M C4AU Miniaturized High Ripple KEY FEATURES 135°C 125°C MAXIMUM TEMPERATURE High Ripple Low ESL Low Profile Miniaturization High dv/dt Low ESL Low Profile High dv/dt Low ESL Low Profile Miniaturization Extended Life at THB Test R75H R76H Highest Ripple Current Highest dv/dt Low Profile Capacitance Range from nF to µF up to 2,000 VDC Low ESL Low ESL Low Profile Low Profile Miniaturization Extended Life Extended Life at 135°C and at 125°C THB Test ©KEMET Corporation. All Rights Reserved. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 2 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Dimensions – Millimeters T T L H S 0.5 LL F 0.5 S1 p p p1 2-pin 4-pin Size Code S S1 Digit 6 Digit 14 Nominal Tolerance Nominal B W 27.5 ±0.4 - T Tolerance Nominal - 11.0 H L LL F Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance +0.3/-0.7 20.0 +0.2/-0.7 31.5 +0.5/-0.7 6 +0/-2 0.8 ±0.05 B X 27.5 ±0.4 - - 13.0 +0.3/-0.7 25.0 +0.2/-0.7 31.5 +0.5/-0.7 6 +0/-2 0.8 ±0.05 B Y 27.5 ±0.4 - - 14.0 +0.3/-0.7 28.0 +0.2/-0.7 31.5 +0.5/-0.7 6 +0/-2 0.8 ±0.05 B 1 27.5 ±0.4 - - 19.0 +0.3/-0.7 29.0 +0.2/-0.7 31.5 +0.5/-0.7 6 +0/-2 0.8 ±0.05 B 2 27.5 ±0.4 - - 22.0 +0.3/-0.7 37.0 +0.2/-0.7 31.5 +0.5/-0.7 6 +0/-2 0.8 ±0.05 B F 37.5 ±0.4 10.2 ±0.4 20.0 +0.4/-0.7 40.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 B J 37.5 ±0.4 10.2 ±0.4 28.0 +0.4/-0.7 37.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 B L 37.5 ±0.4 20.3 ±0.4 30.0 +0.4/-0.7 45.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 B O 37.5 ±0.4 20.3 ±0.4 35.0 +0.4/-0.7 50.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 B M 52.5 ±0.4 20.3 ±0.4 30.0 +0.5/-0.7 45.0 +0.3/-0.7 57.5 +0.8/-0.7 6 +0/-2 1.2 ±0.05 B N 52.5 ±0.4 20.3 ±0.4 35.0 +0.5/-0.7 50.0 +0.3/-0.7 57.5 +0.8/-0.7 6 +0/-2 1.2 ±0.05 E A 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/-0.7 56.0 +0.3/-0.7 57.5 +0.8/-0.7 6 +0/-2 1.2 ±0.05 E B 52.5 ±0.4 20.3 ±0.4 45.0 +0.5/-0.7 65.0 +0.3/-0.7 57.5 +0.8/-0.7 6 +0/-2 1.2 ±0.05 L 1 27.5 ±0.4 - - 21.0 +0.3/-0.7 12.5 +0.2/-0.7 32.0 +0.5/-0.7 6 +0/-2 0.8 ±0.05 L 2 27.5 ±0.4 - - 24.0 +0.3/-0.7 15.0 +0.2/-0.7 32.0 +0.5/-0.7 6 +0/-2 0.8 ±0.05 L 3 37.5 ±0.4 10.2 ±0.4 24.0 +0.4/-0.7 19.0 +0.2/-0.7 41.5 +0.6/-0.7 6 +0/-2 1.2 ±0.05 L 4 37.5 ±0.4 10.2 ±0.4 24.0 +0.4/-0.7 15.0 +0.2/-0.7 41.5 +0.6/-0.7 6 +0/-2 1.2 ±0.05 L 6 37.5 ±0.4 20.3 ±0.4 35.0 +0.4/-0.7 24.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 L 8 37.5 ±0.4 20.3 ±0.4 43.0 +0.4/-0.7 25.0 +0.2/-0.7 42.0 +0.6/-0.7 6 +0/-2 1.2 ±0.05 L 9 27.5 ±0.4 - - 31.0 +0.3/-0.7 19.0 +0.2/-0.7 32.0 +0.5/-0.7 6 +0/-2 0.8 ±0.05 © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 3 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Qualification Reference Standards Climatic Category IEC 61071, EN 61071, VDE0560 55/105/56 according to IEC 60068-1 Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, visit the AEC website at www.aecouncil.com. General Technical Data Dielectric Application Special Features Climatic Category Temperature Range Endurance Test Standard Protection Installation Leads Packaging RoHS Compliance Polypropylene metallized film, non-inductive type, self-healing property DC filtering, DC link AEC–Q200 qualified 55/105/56 IEC 60068–1 −55°C to +125°C 500 hours at 1.3 x VOP + C/D + 500 hours at 1.3 x VOP at 70°C, 85°C, 105°C, 125°C IEC 61071, EN 61071, VDE0560, AEC–Q200 Solvent resistant plastic case UL 94 V–0 compliant Thermosetting resin sealing UL 94 V–0 compliant Any position Tinned wires, standard lead wire length 6 (+0/−2) mm Packed in cardboard trays with protection for the terminals Compliant with Directive 2002/95/EC and Directive 2011/65/EU of the European Parliament and the Council of the EU on 8 June 2011, including the Commission Delegated Directive (EU) 2015/863 that amended Annex II to Directive 2011/65/EU. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 4 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Electrical Characteristics Rated Capacitance Range Rated Voltage (VNDC) Range Capacitance Tolerance Dissipation Factor PP Typical (tgδ 0) Surge Voltage Overvoltage (IEC 61071) Peak Non-Repetitive Current Insulation Resistance Capacitance Deviation in Operation Temperature Storage Storage time Permissible Relative Humidity - Storage 1 – 210 µF 450 – 1,100 VDC ±5% (J) or ±10% (K) measured at T = +25°C ±5°C ≤ 0.0002 at 10 kHz with T = 25°C ±5°C 1.5 * VNDC for maximum 10 times in a lifetime at 25°C ±5°C 1.15 * VNDC for maximum 30 minutes, once per day 1.3 * VNDC for maximum 1 minute, once per day 1.5 * IPKR for maximum 1,000 times in a lifetime IR x C ≥ 30,000 seconds at 100 VDC 1 minute at T = +25°C ±5°C ±2.0% maximum on capacitance value measured at T = +25°C ±5°C −40 to +80°C ≤ 36 months from the date marked on the label glued to the package Annual average ≤ 70%, 85% on 30 days/year randomly distributed throughout year. Dewing not admissible. Life Expectancy 100,000 hours at VNDC at hot spot temperature THS = +85°C Life Expectancy 19,000 hours at VOP105 at hot spot temperature THS = +105°C 4,000 hours at VOP125 at hot spot temperature THS = +125°C Capacitance Drop at End of Life Failure Rate IEC 61709 −5% (typical) ≤ 140 FIT at VNDC at hot spot temperature THS = +85°C © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 5 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Test Method Test Voltage Between Terminals 1.5 * VNDC for 10 seconds or 1.65 * VNDC for 2 seconds, at T = +25°C ±5°C Test Voltage Between Terminals and Case 3.2 k VAC 50 Hz for 2 seconds Damp Heat IEC 60068-2-78 Change of Temperature IEC 60068-2-14 Biased Humidity Test 40°C/93% R.H. at VNDC - 1,000 hours |ΔC/C 0 | ≤ 5% |ΔDF/DF0 | ≤ 200% (at 10 kHz) IR ≥ 50% of initial limit Biased Humidity Test 60°C/95% R.H. at VNDC - 1,000 hours |ΔC/C 0 | ≤ 5% |ΔDF/DF0 | ≤ 200% (at 10 kHz) IR ≥ 100 MΩ Biased Humidity Test 60°C/95% R.H. at VNDC - 3,000 hours |ΔC/C 0 | ≤ 10% |ΔDF/DF0 | ≤ 0.015 (at 1 kHz) IR ≥ 100 MΩ Biased Humidity Test 85°C/85% R.H. at 0.55 x VNDC - 1,000 hours |ΔC/C 0 | ≤ 5% |ΔDF| ≤ 0.005 (at 1 kHz) IR ≥ 100 MΩ Operative Voltage Derating Symbol Voltage (VDC) Life Expectancy (Hours) Operating Voltage at 70°C (THS) VOP70 500 650 800 1100 1,300 100,000 Rated Voltage at 85°C (THS) VNDC 450 600 700 900 1,100 100,000 Operating Voltage at 105°C (THS) VOP105 350 450 550 700 850 19,000 Operating Voltage at 115°C (THS) VOP115 315 420 490 630 770 4,000 Operating Voltage at 125°C (THS) VOP125 270 360 420 540 660 4,000 Maximum Overtemperature ∆Tlim vs TAMB 30 100% Temperature TAMB(°C) 130 125 120 115 110 105 95 100 90 85 80 75 70 65 0% 60 0 25 20% 0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 105 110 115 120 125 130 135 5 55 40% 50 10 60% 45 15 80% 40 20 35 Maximum Irms 25 ∆Tlim (°C) Maximum Irms vs. TAMB 120% 30 35 TAMB(°C) TAMB is the maximum ambient temperature surrounding the capacitor or hottest contact point (e.g. tracks), whichever is higher, in the worst operation conditions in °C. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 6 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Typical Waveforms VNDC / VPK+ V VPK- t VNDC / VPK+ VPK- V t VNDC / VPK+ VPK- V t The applied peak-to-peak ripple voltage shall not exceed 0.2 x VNDC . The peak voltage shall not exceed the rated voltage VNDC . © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 7 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Life Expectancy/Failure Quota Graphs Lifetime Curve at Hot Spot Temperature - 600VDC / 700VDC 1000000 100000 100000 70 85 10000 95 105 115 1000 100 125 0.4 0.6 0.8 1 1.2 Lifetime expectancy [h] Lifetime expectancy (hours) Lifetime Curve at Hot Spot Temperature - 450VDC 1000000 70 85 10000 95 105 115 125 1000 100 1.4 V/Vrated 0.4 0.6 V/Vrated 1 1.2 1.4 C4AQ P FIT at Hot Spot Temperature Lifetime Curve at Hot Spot Temperature - 900VDC / 1100VDC 1000000 10,000 100000 1,000 70 85 95 70 85 10000 95 FIT Lifetime expectancy (h) 0.8 105 100 110 120 105 115 1000 100 125 0.4 0.6 0.8 1 1.2 1.4 V/Vrated © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com 125 10 1 0.5 0.6 0.7 0.8 0.9 1.0 V/Vrated 1.1 1.2 1.3 1.4 F3128_C4AQ_P • 10/25/2023 8 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Environmental Compliance As a leading global supplier of electronic components and an environmentally conscious company, KEMET continually aspires to improve the environmental effects of our manufacturing processes and our finished electronic components. In Europe (RoHS Directive) and in some other geographical areas such as China (China RoHS), legislation has been enacted to prevent or otherwise limit the use of certain hazardous materials, including lead (Pb), in electronic equipment. KEMET monitors legislation globally to ensure compliance and endeavors to adjust our manufacturing processes and/or electronic components as may be required by applicable law. For military, medical, automotive, and some commercial applications, the use of lead (Pb) in the termination is necessary and/or required by design. KEMET is committed to communicating RoHS compliance to our customers. Information related to RoHS compliance will be provided in data sheets and using specific identifiers on the packaging labels. All KEMET power film capacitors are RoHS compliant. Materials & Environment The selection of raw materials that KEMET uses for the production of its electronic components is the result of extensive experience. KEMET directs specific attention toward environmental protection. KEMET selects its suppliers according to ISO 9001 standards and performs statistical analyses on raw materials before acceptance for use in manufacturing our electronic components. All materials are, to the best of KEMET’s knowledge, non-toxic and free from cadmium; mercury; chrome and compounds; polychlorine triphenyl (PCB); bromide and chlorinedioxins bromurate clorurate; CFC and HCFC; and asbestos. Dissipation Factor Dissipation factor is a complex function involved with capacitor inefficiency. The tgδ may vary up and down with increased temperature. For more information, refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors As the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor. Such a breach can result in leakage, impregnation, filling fluid, or moisture susceptibility. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the capacitor's voltage rating. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. These effects can be in the form of capacitance changes, dielectric arc-over, and/or low insulation resistance. Altitude can also affect heat transfer. Heat that is generated in an operation cannot be dissipated properly, and high RI2 losses and eventual failure can result. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 9 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Table 1 – Ratings & Part Number Reference Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESRtyp ESL at 10 kHz V/µs nH Apk mΩ Irms* 75°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC; VOP115 at 115°C = 315 VDC; VOP125 at 125°C = 270 VDC 5.6 10 12.5 15 25 40 50 70 90 100 130 170 210 450 450 450 450 450 450 450 450 450 450 450 450 450 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 65 65 65 65 65 30 30 30 30 15 15 15 15 364 650 813 975 1625 1200 1500 2100 2700 1500 1950 2550 3150 17 22 24 25 28 12 10 13 14 13 15 17 19 14.0 8.6 7.4 6.4 4.8 3.7 3.1 2.3 1.9 3.2 2.5 2.0 1.8 3.3 5.6 7 10 15 20 30 40 50 55 75 110 130 600 600 600 600 600 600 600 600 600 600 600 600 600 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 2.7 4 5 8 12.5 15 20 30 40 45 55 60 85 100 700 700 700 700 700 700 700 700 700 700 700 700 700 700 11 13 14 19 22 20 28 30 35 30 35 35 45 45 20 25 28 29 37 40 37 45 50 45 50 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 65 65 65 65 65 30 30 30 30 15 15 15 15 15 176 260 325 520 813 450 600 900 1200 675 825 900 1275 1500 17 22 24 25 28 12 10 13 14 13 15 15 17 19 20.1 14.2 11.8 8.0 6.1 6.8 5.2 3.5 2.8 4.8 4.0 3.6 2.8 2.4 T H L S S1 V/µs Apk nH 6.8 9.6 11.0 12.6 16.0 19.6 22.8 29.1 35.1 27.4 33.3 41.6 47.7 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQGBU4560P1WK C4AQGBU5100P1XK C4AQGBU5125P1YK C4AQGBU5150P11K C4AQGBU5250P12K C4AQGBW5400P3FK C4AQGBW5500P3JK C4AQGBW5700P3LK C4AQGBW5900P3OK C4AQGBW6100P3MK C4AQGBW6130P3NK C4AQGEW6170P3AK C4AQGEW6210P3BK 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQHBU4330P1WJ C4AQHBU4560P1XJ C4AQHBU4700P1YJ C4AQHBU5100P11J C4AQHBU5150P12J C4AQHBW5200P3FJ C4AQHBW5300P3JJ C4AQHBW5400P3LJ C4AQHBW5500P3OJ C4AQHBW5550P3MJ C4AQHBW5750P3NJ C4AQHEW6110P3AJ C4AQHEW6130P3BJ 256 234 96 72 64 58 36 36 30 27 23 23 18 18 C4AQJBU4270P1WJ C4AQJBU4400P1XJ C4AQJBU4500P1YJ C4AQJBU4800P11J C4AQJBU5125P12J C4AQJBW5150P3FJ C4AQJBW5200P3JJ C4AQJBW5300P3LJ C4AQJBW5400P3OJ C4AQJBW5450P3MJ C4AQJBW5550P3NJ C4AQJBW5600P3NJ C4AQJEW5850P3AJ C4AQJEW6100P3BJ Packaging Quantity PART NUMBER VNDC at 85°C = 600 VDC; VOP105 at 105°C = 450 VDC; VOP115 at 115°C = 420 VDC; VOP125 at 125°C = 360 VDC 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 65 65 65 65 65 30 30 30 30 15 15 15 15 215 364 455 650 975 600 900 1200 1500 825 1125 1650 1950 17 22 24 25 28 12 10 13 14 13 15 17 19 18.7 11.8 9.9 7.5 5.8 5.8 4.0 3.1 2.5 4.5 3.4 2.4 2.1 5.9 8.2 9.5 11.7 14.6 15.6 19.9 24.9 29.9 23.0 28.7 37.9 42.9 44 36 33 29 23 20 18 15 13 12 10 8 7 VNDC at 85°C = 700 VDC; VOP105 at 105°C = 550 VDC; VOP115 at 115°C = 490 VDC; VOP125 at 125°C = 420 VDC Cap Value (µF) VDC Dimensions (mm) dV/dt lpkr ESL 5.7 7.5 8.7 11.2 14.1 14.5 17.4 23.2 28.7 22.3 26.4 27.5 35.8 40.6 44 36 33 29 23 20 18 15 13 12 10 10 8 7 mΩ Arms (°C/W) ESRtyp at 10 kHz Irms* 75°C at 10 kHz Rth (HS/Amb) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 75°C + 30°C = 105°C. Attention: Hot spot at 105°C reduced the life time! © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 10 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Table 1 – Ratings & Part Number Reference cont. Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESRtyp ESL at 10 kHz V/µs nH Apk mΩ Irms* 75°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 85°C = 900 VDC; VOP105 at 105°C = 700 VDC; VOP115 at 115°C = 630 VDC; VOP125 at 125°C = 540 VDC 1.5 2.7 3.3 5 8 12 14 20 25 30 40 55 65 900 900 900 900 900 900 900 900 900 900 900 900 900 11 13 14 19 22 20 28 30 35 30 35 45 45 20 25 28 29 37 40 37 45 50 45 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 70 70 70 70 70 35 35 35 35 15 15 15 15 105 189 231 350 560 420 490 700 875 450 600 825 975 17 22 24 25 28 12 10 13 14 13 15 17 19 28.9 16.8 14.2 10.0 7.3 6.9 5.9 4.3 3.5 5.7 4.4 3.3 2.9 1 1.8 2.2 3.3 5 8 10 12 18 20 25 27 38 45 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 1,100 11 13 14 19 22 20 28 30 35 30 35 35 45 45 20 25 28 29 37 40 37 45 50 45 50 50 56 65 31.5 31.5 31.5 31.5 31.5 42 42 42 42 57.5 57.5 57.5 57.5 57.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 \ \ \ \ \ 10.2 10.2 20.3 20.3 20.3 20.3 20.3 20.3 20.3 80 80 80 80 80 40 40 40 40 20 20 20 20 20 80 144 176 264 400 320 400 480 720 400 500 540 760 900 17 22 24 25 28 12 10 13 14 13 15 15 17 19 36.4 21.0 17.6 12.3 9.0 8.7 6.9 5.8 4.1 7.2 5.7 5.4 4.0 3.4 T H L S S1 V/µs Apk nH 4.8 6.9 7.9 10.1 13.2 14.4 16.3 21.2 25.5 20.4 25.2 32.5 37.0 44 36 33 29 23 20 18 15 13 12 10 8 7 256 234 96 72 64 58 36 36 30 27 23 18 18 C4AQOBU4150P1WJ C4AQOBU4270P1XJ C4AQOBU4330P1YJ C4AQOBU4500P11J C4AQOBU4800P12J C4AQOBW5120P3FJ C4AQOBW5140P3JJ C4AQOBW5200P3LJ C4AQOBW5250P3OJ C4AQOBW5300P3MJ C4AQOBW5400P3NJ C4AQOEW5550P3AJ C4AQOEW5650P3BJ 256 234 96 72 64 58 36 36 30 27 23 23 18 18 C4AQQBU4100P1WJ C4AQQBU4180P1XJ C4AQQBU4220P1YJ C4AQQBU4330P11J C4AQQBU4500P12J C4AQQBW4800P3FJ C4AQQBW5100P3JJ C4AQQBW5120P3LJ C4AQQBW5180P3OJ C4AQQBW5200P3MJ C4AQQBW5250P3NJ C4AQQBW5270P3NJ C4AQQEW5380P3AJ C4AQQEW5450P3BJ Packaging Quantity PART NUMBER VNDC at 85°C = 1,100 VDC; VOP105 at 105°C = 850 VDC; VOP115 at 115°C = 770 VDC; VOP125 at 125°C = 660 VDC Cap Value (µF) VDC Dimensions (mm) dV/dt lpkr ESL 4.2 6.2 7.1 9.1 11.8 12.9 15.0 18.1 23.7 18.3 22.0 22.8 29.8 34.0 44 36 33 29 23 20 18 15 13 12 10 10 8 7 mΩ Arms (°C/W) ESRtyp at 10 kHz Irms* 75°C at 10 kHz Rth (HS/Amb) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 75°C + 30°C = 105°C. Attention: Hot spot at 105°C reduced the life time! © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 11 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Table 2 – Ratings & Part Number Reference for Low Profile Design Cap Value VDC (µF) Dimensions (mm) T H L S S1 dV/dt Ipkr ESRtyp ESL at 10 kHz V/µs nH Apk mΩ Irms* 75°C at 10 kHz Arms Rth (HS/Amb) Packaging Quantity (°C/W) PART NUMBER VNDC at 85°C = 450 VDC; VOP105 at 105°C = 350 VDC; VOP115 at 115°C = 315 VDC; VOP125 at 125°C = 270 VDC 5.6 8 15 12 16 36 45 450 450 450 450 450 450 450 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 65 65 65 30 30 30 30 364 520 975 360 480 1080 1350 11 13 16 7 8 9 9 13.6 10.0 6.1 11.8 8.9 4.1 3.3 3.3 5 10 7.5 10 20 30 600 600 600 600 600 600 600 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 2.7 3.8 7.5 5.8 8 15 22 700 700 700 700 700 700 700 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 1.5 2.5 4.8 3.8 5 10 14 900 900 900 900 900 900 900 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 1 1.8 3.3 2.6 3.5 7.5 10 1,100 1,100 1,100 1,100 1,100 1,100 1,100 21 24 31 24 24 35 43 12.5 15 19 15 19 24 25 32 32 32 41.5 41.5 42 42 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 80 80 80 40 40 40 40 80 144 264 104 140 300 400 11 13 16 7 8 9 9 36.2 20.7 11.9 26.1 19.4 9.1 6.9 T H L S S1 V/µs Apk nH 6.8 8.6 12.6 8.6 10.5 17.8 21.4 46 39 30 33 29 23 19 192 168 80 132 88 60 48 C4AQGLU4560P11K C4AQGLU4800P12K C4AQGLU5150P19K C4AQGLW5120P34K C4AQGLW5160P33K C4AQGLW5360P36K C4AQGLW5450P38K 192 168 80 132 88 60 48 C4AQHLU4330P11J C4AQHLU4500P12J C4AQHLU5100P19J C4AQHLW4750P34J C4AQHLW5100P33J C4AQHLW5200P36J C4AQHLW5300P38K 192 168 80 132 88 60 48 C4AQJLU4270P11J C4AQJLU4380P12J C4AQJLU4750P19J C4AQJLW4580P34J C4AQJLW4800P33J C4AQJLW5150P36J C4AQJLW5220P38J 192 168 80 132 88 60 48 C4AQOLU4150P11J C4AQOLU4250P12J C4AQOLU4480P19J C4AQOLW4380P34J C4AQOLW4500P33J C4AQOLW5100P36J C4AQOLW5140P38J 192 168 80 132 88 60 48 C4AQQLU4100P11J C4AQQLU4180P12J C4AQQLU4330P19J C4AQQLW4260P34J C4AQQLW4350P33J C4AQQLW4750P36J C4AQQLW5100P38J Packaging Quantity PART NUMBER VNDC at 85°C = 600 VDC; VOP105 at 105°C = 450 VDC; VOP115 at 115°C = 420 VDC; VOP125 at 125°C = 360 VDC 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 65 65 65 30 30 30 30 215 325 650 225 300 600 900 11 13 16 7 8 10 9 18.5 12.7 7.0 15.2 11.4 5.8 4.0 5.8 7.7 11.7 7.6 9.3 14.8 19.5 46 39 30 33 29 23 19 VNDC at 85°C = 700 VDC; VOP105 at 105°C = 550 VDC; VOP115 at 115°C = 490 VDC; VOP125 at 125°C = 420 VDC 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 65 65 65 30 30 30 30 176 247 488 174 240 450 660 11 13 16 7 8 9 9 19.8 14.5 8.0 17.3 12.5 6.8 4.7 5.6 7.1 10.9 7.1 8.9 13.7 17.9 46 39 30 33 29 23 19 VNDC at 85°C = 900 VDC; VOP105 at 105°C = 700 VDC; VOP115 at 115°C = 630 VDC; VOP125 at 125°C = 540 VDC 27.5 27.5 27.5 37.5 37.5 37.5 37.5 \ \ \ 10.2 10.2 20.3 20.3 70 70 70 35 35 35 35 105 175 336 133 175 350 490 11 13 16 7 8 9 9 28.6 17.7 9.9 21.2 16.2 8.1 5.9 4.7 6.5 9.8 6.4 7.8 12.5 15.9 46 39 30 33 29 23 19 VNDC at 85°C = 1,100 VDC; VOP105 at 105°C = 850 VDC; VOP115 at 115°C = 770 VDC; VOP125 at 125°C = 660 VDC Cap Value (µF) VDC Dimensions (mm) dV/dt lpkr ESL 4.2 6.0 9.0 5.8 7.1 11.8 14.7 46 39 30 33 29 23 19 mΩ Arms (°C/W) ESRtyp at 10 kHz Irms* 75°C at 10 kHz Rth (HS/Amb) (*) Irms value that leads to a ΔT of ≈ 30°C in the hot spot > THS = TAMB + ΔT = 75°C + 30°C = 105°C. Attention: Hot spot at 105°C reduced the life time! © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 12 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAuCu (SAC) alloys, or SnCu alloys, as the primary solder material. This has increased the liquidus temperature from 183°C for a SnPb eutectic alloy to 217 – 221°C for new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 – 170°C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 – 15 mm), and great care must be taken during soldering. The recommended solder profiles from KEMET should be used. Contact KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760–1 Edition 2 serves as a solid guideline for successful soldering. See Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the recommended limits may result in degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after curing the surface mount parts. Contact KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Allow time for the capacitor surface temperature to return to normal before the second soldering cycle. Wave Soldering Recommendations Manual Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2+3 seconds max 260°C 250 Second Wave First Wave Recommended Soldering Temperature Temperature (°C) 200 400 Soldering Iron Bit Temperature (°C) 350 300 ∆ T < 150°C Cooling Preheating 150 ca. 2°C/second ca. 3.5°C/second typical ca. 5°C/second Tpreheat 100 Typical 250 50 200 150 0 100 0 40 80 120 160 200 240 Time (seconds) 50 0 0 1 2 3 4 5 6 7 8 Soldering Time (seconds) The soldering iron tip temperature should be set at 350°C (+10°C maximum) with the soldering duration not to exceed more than 3 seconds. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 13 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Soldering Process cont. Wave Soldering Recommendations cont. 1. The tables indicates the maximum set-up temperature of the soldering process Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Polypropylene 130°C 270°C 2. The maximum temperature measured inside the capacitor: set the temperature so that inside the element the maximum temperature is below the limit. Dielectric Film Material Maximum Temperature Measured Inside the Element Polypropylene 125°C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is pre-heated and transported over the solder bath, as in normal flow soldering, without touching the solder. When the board is over the bath, it is stopped. Pre-designed solder pots are lifted from the bath with molten solder, only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document. However, instead of two baths, there is only one with a time from 3 – 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts do not overheat. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 14 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Mounting Resistance to Vibration and Mechanical Shock AEC-Q200 Rev. E, Mechanical Stress Tests: Figure 1 of Method 213 Mechanical Shock • THT: Condition C • SMD: Condition C • Tested per the Supplier’s recommended mounting method MIL-SDT-202 Method 213 • 5 g for 20 minutes, 12 cycles each of 3 orientations • Tested per the Supplier’s recommended mounting method • Verification of transfer load: during setup, verify that with Vibration the selected PCB design (size, thickness and secure points), or an alternative mount, that the transferred load onto the component corresponds to the requested load. This verification can be achieved using a laser vibrometer or other adequate measuring device MIL-SDT-202 Method 204 • Test from 10 Hz – 2,000 Hz. The capacitors are designed for PCB mounting. The stand-off pipes must be in good contact with the printed circuit board. The capacitor body has to be properly fixed (e.g. clamped or glued). Construction Single-sided Metallized Polypropylene Film (First Layer) Molded Plastic Case Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin Leads © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 15 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life Construction cont. Low Profile Version: Winding Scheme: Single-sided Metallized Polypropylene Film Marking Dielectric Type, Series Manufacturing Logo Capacitance, Tolerance Rated Voltage Climatic Category (Temperature - Minimum/Maximum) Self-Healing Dielectric Date Code Internal Use Slight change in the layout can be possible but this does not affect the content of the information of the current marking. This change will be achieved without impact to product form, fit or function, as the products are equivalent with respect to physical, mechanical, quality and reliability characteristics Manufacturing Date Code (IEC–60062) Year Code Year Code Year Code Month Code Month Code 2010 2011 2012 2013 2014 2015 2016 A B C D E F H 2017 2018 2019 2020 2021 2022 2023 J K L M N P R 2024 2025 2026 2027 2028 2029 2030 S T U V W X A January February March April May June 1 2 3 4 5 6 July August September October November December 7 8 9 O N D © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 16 Power and AC Film Capacitors – Printed Circuit Board Mount Power Film Capacitors C4AQ-P, Radial, 2 or 4 Leads, 450 – 1,100 VDC, for DC Link (Automotive Grade) - 125°C with Long Life KEMET Electronics Corporation Sales Offices For a complete list of our global sales offi ces, please visit www.kemet.com/sales. Disclaimer YAGEO Corporation and its affi liates do not recommend the use of commercial or automotive grade products for high reliability applications or manned space fl ight. All product specifi cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are not intended to constitute – and KEMET specifi cally disclaims – any warranty concerning suitability for a specifi c customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. Additional information about production site flexibility can be found KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • One East Broward Boulevard Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com F3128_C4AQ_P • 10/25/2023 17