AA1114-2YC-CC

11mm x 1.4mm BACKLIGHT AA1114/2YC/CC YELLOW Features LOW POWER CONSUMPTION. IDEAL FOR BACKLIGHTING. RoHS COMPLIANT. Description The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0 .25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAB2773 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: B.H.LI PAGE: 1 OF 3 ERP: 1201001463 Selection Guide Part No. Dice Lens Type Iv (mcd) @ 20mA Min. AA1114/2YC/CC YELLOW (GaAsP/GaP) WATER CLEAR 4 Typ. 10 Viewing Angle 2θ1/2 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at TA=25°C Symbol λpeak λD ∆λ1/2 C VF IR Parameter Peak Wavelength Dominant Wavelength Spectral Line Half-width Capacitance Forward Voltage Reverse Current Device Yellow Yellow Yellow Yellow Yellow Yellow Typ. 590 588 35 20 2.1 2.5 10 Max. Units nm nm nm pF V uA Test Conditions IF=20mA IF=20mA IF=20mA VF=0V;f=1MHz IF=20mA VR = 5V Absolute Maximum Ratings at TA=25°C Parameter Power dissipation DC Forward Current Peak Forward Current [1] Reverse Voltage Operating/Storage Temperature Lead Solder Temperature [2] Lead Solder Temperature [3] Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. Yellow 105 30 140 5 -40°C To +85°C 260°C For 3 Seconds 260°C For 5 Seconds Units mW mA mA V SPEC NO: DSAB2773 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: B.H.LI PAGE: 2 OF 3 ERP: 1201001463 Yellow AA1114/2YC/CC Remarks: If there is sorting requirement (eg. forward voltage, luminous intensity or wavelength) , the condition as follows: 1.Wavelength: +/-1nm (Test condition is based on the sorting standard). 2.Luminous intensity: +/-15% (Test condition is based on the sorting standard). 3.Forward voltage: +/-0.1V (Test condition is based on the sorting standard). SPEC NO: DSAB2773 APPROVED: J. Lu REV NO: V.3 CHECKED: Allen Liu DATE: MAR/05/2005 DRAWN: B.H.LI PAGE: 3 OF 3 ERP: 1201001463