APK3216RWC-A-F01

3.2x1.6 mm SMD CHIP LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: APK3216RWC/A-F01 WHITE Description The source color devices are made with InGaN on SiC Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features 3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. L OW POWER CONSUMPTION. W IDE VIEWING ANGLE. I DEAL FOR BACK LIGHT AND INDICATOR. VARIOUS COLORS AND LENS TYPES AVAILABLE. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE:6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY:10.5 lm/W(TYP.) COLOR REPRODUCTION INDEX:80 RoHS COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications t raffic signaling. backlighting (illuminated advertising , general lighting). i nterior and exterior automotive lighting. s ubstitution of micro incandescent lamps. reading lamps. s ignal and symbol luminaire for orientation. m arker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. i ndoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 1 OF 7 ERP: 1204000604 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20 mA Min. APK3216RWC/A-F01 WHITE (InGaN) WATER CLEAR 70 Typ. 200 Note2 v (mlm) @ 20 mA Typ. 700 Note3 Viewing Note1 Angle 2θ1/2 90° Absolute Maximum Ratings at TA=25°C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 120 5 110 -40 To +85 -40 To +100 30 100 300 120 Unit mW V °C °C °C mA mA °C/W °C/W Thermal resistance Note5 Junction/ambient Junction/solder point Notes: 1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size ≥ 16 mm 2 per pad), Electrical / Optical Characteristics at TA=25°C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 Temperature coefficient of x [Typ.] IF=20mA, -10°C T 100°C Temperature coefficient of y [Typ.] IF=20mA, -10°C T 100°C Temperature coefficient of VF IF=20mA, -10°C T 100°C [Typ.] VF Note2 Symbol X Y Note1 Value 0.31 0.31 2.7 3.2 4.0 0.01 Unit - Note1 V Reverse Current (VR=5V) µA 10-3 / °C 10-3 / °C mV/ °C TCy -0.2 TCV -2.5 Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V. SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 2 OF 7 ERP: 1204000604 Brightness codes luminous Intensity Iv(mcd) @ 20 mA Code. M N P Q Min. 70 110 180 280 Note1 v(mlm) @ 20 mA Max. 130 220 320 420 Note2 Typ. 300 480 710 960 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White APK3216RWC/A-F01 SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 3 OF 7 ERP: 1204000604 APK3216RWC/A-F01 SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 4 OF 7 ERP: 1204000604 APK3216RWC/A-F01 White CIE 0.44 0.42 0.40 c1 0.38 0.36 0.34 0.32 0.30 0.28 a0 a1 b3 b4 b1 b2 c0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 X Y 0.264 0.267 0.283 0.305 0.296 0.276 0.280 0.248 X Y 0.248 0.286 a1 0.275 0.321 0.283 0.305 0.264 0.267 Reference CCT: 14000~9000k b1 X Y 0.283 0.305 0.330 0.360 0.330 0.339 0.287 0.295 X Y Reference CCT: 14000~9000k b2 0.287 0.295 0.330 0.339 0.330 0.318 0.296 0.276 Reference CCT: 9000~5600k b3 X Y 0.275 0.321 0.298 0.350 0.306 0.332 0.283 0.305 X Y Reference CCT: 9000~5600k b4 0.298 0.350 0.321 0.379 0.330 0.360 0.306 0.332 Reference CCT: 9000~7000k c0 X Y 0.330 0.360 0.361 0.385 0.356 0.351 0.330 0.318 X Y Reference CCT: 7600~5600k c1 0.321 0.379 0.366 0.419 0.361 0.385 0.330 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 5 OF 7 ERP: 1204000604 APK3216RWC/A-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 6 OF 7 ERP: 1204000604 PACKING & LABEL SPECIFCATIONS APK3216RWC/A-F01 SPEC NO: DSAH3761 APPROVED: WYNEC REV NO: V.1 CHECKED: Allen Liu DATE: APR/26/2007 DRAWN: Y.L.LI PAGE: 7 OF 7 ERP: 1204000604