1206B102K202NT

Commercial Chip - X7R 16Vdc to 10kVdc A range of commercial MLC chip capacitors in Stable EIA Class II dielectric. Class II X7R chips are used as decoupling, by-pass, filtering and transient voltage suppression elements and exhibit +/-15% temperature coefficient and predictable variation of electrical properties with time, temperature and voltage. Standard EIA case sizes and available C/V values are listed below - special sizes, thicknesses and other voltage ratings are available; please contact the sales office for information. Designed for surface mount application with nickel barrier terminations making them suitable for solder wave and reflow solder board attachment as well as vapor phase attachment for part sizes 2225 or smaller. Silver-palladium terminations are also available for hybrid use with conductive epoxy. Capacitance and voltage selection for popular chip sizes Size 0402 0504 0603 0805 1005 1206 1210 1515 Min cap. 1812 1825 121 121 121 121 121 121 121 151 151 151 151 151 471 471 0. 024 0.61 0.044 1.12 0.035 0.89 0.054 1.37 0.054 1.37 0.064 1.63 0.065 1.63 0.130 3.02 0.065 1.63 0.080* 2.03 0.065 1.63 0.100* 2.54 0.080 2.03 0.140* 3.56 16V 562 393 273 124 154 334 474 125 684 824 125 155 185 225 25V 472 333 223 104 124 274 474 105 564 564 105 125 155 225 50V 472 333 223 104 124 274 474 824 394 564 824 125 155 225 100V 472 333 223 683 823 184 334 684 274 394 564 824 125 185 200V 222 153 103 333 473 104 184 564 184 224 334 564 824 155 250V 152 103 682 273 393 683 124 394 124 154 224 394 684 125 300V • • • 153 183 473 823 274 823 104 154 224 474 824 400V • • • 123 123 273 563 224 563 823 104 184 334 564 500V • • • 123 822 223 563 154 563 683 104 154 334 474 600V • • • 822 822 183 393 124 393 563 683 124 224 394 800V† • • • 472 472 103 273 823 273 333 473 683 124 274 1kV† • • • 272 272 682 153 563 153 223 273 473 823 154 1.5kV† • • • • • 222 472 183 472 682 822 153 273 563 2kV† • • • • • 102 222 822 272 332 472 682 123 273 3kV† • • • • • • • 152 561 821 122 222 272 472 4kV† • • • • • • • 122 331 391 681 122 152 272 † 5kV • • • • • • • • • • • • 821 182 6kV† • • • • • • • • • • • • • • 7kV† • • • • • • • • • • • • • • 8kV† • • • • • • • • • • • • • • 9kV† • • • • • • • • • • • • • 10kV • • • • • • • • • • • • • Tmax inches: mm: † † 1808 Units rated above 800V may require conformal coating to preclude arcing over chip surface 20 | Phone: +1.661.295.5920 | www.novacap.com • Commercial Chip - X7R 16Vdc to 10kVdc l For dielectric characteristics see page 6. l For dimensions see page 12. l For termination options see pages 3 & 15. l For capacitance tolerances available see page 15. l For ordering information see page 15. Note: Maximum capacitance values are shown below as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF. Capacitance and voltage selection for popular chip sizes 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size Min cap. 471 471 471 471 102 102 102 102 102 102 102 222 222 0.180 4.57 0.080 2.03 0.080 2.03 0.150* 3.81 0.180 4.57 0.250 6.35 0.250 6.35 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 185 155 225 275 355 525 525 825 905 106 126 206 256 16V 155 125 185 225 325 505 505 755 805 106 106 186 226 25V 155 125 185 225 325 425 425 705 755 905 106 156 206 50V 155 125 155 225 275 405 405 625 685 825 905 126 186 100V 125 684 105 185 225 355 355 565 625 705 825 825 156 200V 105 564 824 155 185 325 325 505 605 685 805 825 126 250V 824 394 474 105 125 225 225 475 505 575 705 755 106 300V 564 274 394 684 824 125 125 255 275 305 375 545 875 400V 474 274 334 564 684 105 105 185 185 185 225 335 475 500V 274 224 274 474 394 684 684 155 155 155 225 275 395 600V 224 124 154 334 274 474 394 684 824 105 155 225 275 800V† 154 823 104 224 184 334 334 564 684 684 105 155 185 1kV† 393 273 333 683 563 124 124 274 334 344 474 684 824 1.5kV† 273 123 153 333 273 823 683 154 184 184 274 394 474 2kV† 472 272 332 682 822 333 273 473 563 683 823 124 184 3kV† 272 152 152 332 472 183 153 223 333 393 473 823 104 4kV† 152 821 102 222 272 123 103 123 183 223 333 473 563 5kV† • • • • • 682 562 822 123 153 223 333 393 6kV† • • • • • 472 472 562 822 103 153 223 273 7kV† • • • • • • 332 472 682 822 123 153 223 8kV† • • • • • • 272 332 472 562 103 123 183 9kV† • • • • • • 182 272 392 472 682 103 123 10kV† :inches :mm Tmax * Denotes non standard chip thickness. Order code needs to have an ’X’ inserted together with the dimension in inches e.g. X080 where dimension is 0.080” www.novacap.com | Phone: +1.661.295.5920 | 21 Case Size Dielectric Capacitance Capacitance Tolerance Voltage Termination Special Thickness High Reliability Testing Packaging Marking XX 1206 N 472 J 101 N X050 H T M High Reliability Test Criteria Prefix Chip Ordering Information - HB Capacitance Code 1st two digits are significant, third digit denotes number of zeros, R = decimal Examples: 1R0 = 1.0pF Special Thickness Packaging Marking 120 = 12pF None Standard thickness as per Novacap catalog specifications None Bulk None Unmarked 471 = 470pF X 102 = 1,000pF 273 = 0.027µF 474 = 0.47µF 105 = 1.0µF Denotes a special thickness other than standard. Specify in inches if required. (As shown above X = 0.050”) C0G/NP0 Ultra Stable M C0G/NP0 Ultra Stable Magnetic Free F C0G/NP0 High Temp. (up to 160ºC) D C0G/NP0 High Temp. (up to 200ºC) K R3L R R2D Pulse Energy Y5V General Purpose Z Z5U General Purpose B X7R Stable C X7R Stable Magnetic Free X BX MIL S X8R E Class II G Class II High Temp. (up to 160ºC) W X5R Stable RN Lead free C0G/NP0 Ultra Stable RB Lead free X7R Stable BB X7R BME Stable BW X5R BME Stable Waffle Pack None Standard product H High Reliability Testing H High Temp Screening M Marked *Marking not available on sizes < 0603 { Hi-Reliability Testing Criteria HB MIL-PRF-55681 Group A HV MIL-PRF-49467 Group A HS MIL-PRF-123 Group A Termination Codes Voltage Code Ultra Stable Y Tape & Reel High Reliability Testing Dielectric Codes N T W 1st two digits are significant, third digit denotes number of zeros. For example: 160 = 16 Volts 101 = 100 Volts 501 = 500 Volts High Temp. (up to 150ºC) 102 = High Temp. (up to 200ºC) 502 = 103 = P Palladium Silver PR Palladium Silver* K Solderable Palladium Silver* N Nickel Barrier* 100% tin Y Nickel Barrier 90% tin, 10% lead NG Nickel Barrier Gold Flash* C FlexiCap™/Nickel Barrier* 100% tin D FlexiCap™/Nickel Barrier 90% tin, 10% lead 1,000 Volts B Copper Barrier* 100% tin 5,000 Volts E Copper Barrier 90% tin, 10% lead 10,000 Volts S Silver* * Indicates RoHS terminations Capacitance Tolerance Codes Code Tolerance N M B ±0.10pF • • Prefix Definitions C ±0.25pF • • None D ±0.50pF • • Cap. Value < 10pF * Not RF series Standard chip Y5V R3L R2D Z5U C0G/NP0 F/D K R Y/Z X7R BX X8R B C X S Positive Class X5R VTC II E/G W P • • RF Improved ESR Capacitor p. 23 F ±1% • • • LS Y3 Certified Safety Capacitor p. 42 - 43 G ±2% • • • • ES Y Certified Safety Capacitor p. 42 - 43 J ±5% • • • • • •* • •* • • ST Stacked Capacitor Assembly p. 48 - 53 K ±10% • • • • • • • • • • • • SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53 M ±20% • • • • • • • • • • • • CR Cap-Rack Capacitor Array p. 54 Z +80% -20% • • • •* • RC Bleed Resistor p. 58 - 61 P +100% -0% • • • •* • 2 www.novacap.com | Phone: +1.661.295.5920 | 15 T Technical Summary W Technical Information Novacap provides application notes throughout this catalog as a guide to chip selection and attachment methods. Refer to the Novacap Technical Brochure found at www.novacap. com for more details. This technical information includes the nature of capacitance, dielectric properties, electrical properties, classes of dielectrics, ferroelectric behavior, test standards, and high reliability test plans. Please do not hesitate to contact the sales office for any product or technical assistance. Primary Dielectric Types C0G/NP0: Ultra stable Class I dielectric, with negligible dependence of capacitance on temperature, voltage, frequency, and time. Used in circuitry requiring very stable performance. X7R: Stable Class II dielectric, with predictable change in properties across a temperature range of -55°C to +125°C. Used as blocking, decoupling, bypassing, and frequency discriminating elements. This dielectric is ferroelectric and provides higher capacitance than Class I materials. Capacitor Size Size availability is based primarily on capacitance values and voltage rating. Smaller units are generally less expensive. Because mass affects the thermal shock susceptibility of chip capacitors, size selection should consider the soldering method used to attach the chip to the board. Sizes 1812 and smaller can be wave, vapor phase, or reflow soldered. Larger units require reflow soldering. BX: The military specification for ceramic chip capacitors (MILPRF-55681) defines a mid-K stable dielectric designated as BX. The BX specification has voltage temperature limits in addition to temperature limits of capacitance. The BX dielectric is limited to ±15% maximum change in capacitance between 25°C and -55°C or +125°C and also has a voltage restriction of +15% / -25% maximum change in capacitance between 25°C and -55°C or +125°C at rated voltage. Chip Selection Multilayer capacitors (MLC) are categorized by dielectric performance with temperature. The Temperature Coefficient of Capacitance describes the variance of capacitance value with temperature. The choice of components is therefore largely determined by the temperature stability required of the device and the size necessary for the desired capacitance value and voltage rating. • • • • • • • • • • • • • • • • • • • • • • • • FlexiCap™/Nickel Barrier 100% tin RoHS RoHS NG C • • • • • • • • • • • • D • • • Solderable Silver Y • • • • • • Nickel Barrier Gold flash Nickel Barrier 90/10% tin/lead Nickel Barrier 100% tin Solderable Palladium Silver RoHS RoHS RoHS PR K N • • • • • • • • • • • • • • Solder Attachment: N Nickel Barrier, 100% matte tin plated - RoHS RoHS B E RoHS S • Y Nickel Barrier, tin-lead plated • • • • • • • • • • • • • • • • • • • We recommend the following termination types: Copper Barrier 90/10% tin/lead P • • • Termination Material Copper Barrier 100% tin Code N/RN K B/RB BB BW X Y Z M C S F D G E P R Palladium Silver Palladium Silver Dielectric C0G/NP0 R3L X7R X7R BME X5R BME BX Y5V Z5U C0G/NP0 (Mag free) X7R (Mag free) X8R C0G/NP0 (160ºC) C0G/NP0 (200ºC) Class II (160ºC) Class II (200ºC) Pulse Power R2D FlexiCap™/Nickel Barrier 90/10% tin/lead Z5U/Y5V: General purpose Class III dielectrics with higher dielectric constant and greater variation of properties over temperature and voltage. Very high capacitance per volume is attainable for general purpose applications where stability over a wide temperature range is not critical. Packaging Units are available reeled, in waffle pack, or bulk packaged. Bar coded labels are standard for reeled and bulk packaging. Dielectric Termination Combinations MB C FlexiCap™ with Nickel Barrier, 100% tin plated - RoHS D FlexiCap™ Nickel Barrier, tin-lead plated B Copper Barrier 100% matte tin plated - RoHS E Copper Barrier, tin-lead plated K Solderable Palladium Silver - RoHS (suitable for conductive epoxy attach) • • S Solderable Silver - RoHS • • • • • Conductive Epoxy attachment: P Palladium Silver PR Palladium Silver - RoHS NG Nickel Barrier Gold Flash RoHS (suitable for soldering attach) www.novacap.com | Phone: +1.661.295.5920 | 3 Dielectric Characteristics X7R (B) Stable and RoHS 2013 (RB) type -55°C to 125°C Temperature coefficient : ±15% DC Max. Dissipation factor 2.5% max 3.5% max >25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater 20 UPPER LIMIT 15 10 5 TYPICAL 0 -5 -10 -15 -20 -55 25V rating: 100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: