LT1007X

LT1007X FEATURES n n n n Low Noise 200°C Op Amp PIN CONFIGURATION TOP VIEW VOS TRIM 8 VOS TRIM 1 2 3 4 V– H PACKAGE METAL CAN TJMAX = 225°C, θJA = 150°C/W , LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. 7 V+ 6 5 NC 100% Tested at 200°C Absolute Maximum Operating Temperature 225°C Precision Specifications Over Extended Temperature Range Direct Replacement for OP-27 Series – + ORDER INFORMATION LEAD FREE FINISH LT1007XH#PBF TAPE AND REEL LT1007XH#TRPBF PART MARKING LT1007XH PACKAGE DESCRIPTION 8-Lead TO-5 Metal Can TEMPERATURE RANGE –55°C to 200°C Consult LTC Marketing for parts specified with wider operating temperature ranges. Consult LTC Marketing for information on non-standard lead based finish parts. For more information on lead free part marking, go to: http://www.linear.com/leadfree/ For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/ ELECTRICAL CHARACTERISTICS SYMBOL VOS IOS IB AV CMRR PSRR VOUT IS ISC – ISC+ SR PARAMETER Input Offset Voltage Input Offset Current Bias Current Voltage Gain Common Mode Rejection Power Supply Rejection Output Voltage Swing Supply Current Short-Circuit Low Short-Circuit High Slew Rate CONDITIONS VCM = 0 VCM = 0 VCM = 0 VOUT = ±10V, RL = 2k VCM = ±10V ΔV = ±5V RL = 2k VOUT = 0 VOUT = 0 VOUT = 0 ΔV = ±5V Min Min Supply Voltage = ±15V. (Note 1) MIN/MAX 125°C 0.16 85 95 2000 104 100 VS – 3 5.7 TYP 150°C 0.07 30 50 4000 117 117 VS – 2 2.8 20 17 1.2 TYP 175°C 0.12 100 750 2500 114 114 VS – 2 2.8 17 14.5 1.1 MIN/MAX 200°C 1.5 3000 12000 100 100 86 VS – 3 6 5 5 0.7 TYP 225°C 10 5000 20000 20 94 55 VS – 3 2.5 9 5 0.8 UNITS mV nA nA V/mV dB dB V mA mA mA V/μS Note 1: Devices are 100% tested at 200°C ±3°C to the limits shown. Since parameters change rapidly with temperature, devices are guaranteed at 190°C ±3°C and QA testing is done at 190°C ±3°C. For normal operating temperature range specifications please see the LT1007M data sheet. Information furnished by Linear Technology Corporation is believed to be accurate and reliable. However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights. 1007Xfa Linear Technology Corporation 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 ● FAX: (408) 434-0507 ● LT 0908 REV A • PRINTED IN USA www.linear.com © LINEAR TECHNOLOGY CORPORATION 1987