0100ADT6

CORCOM Product Guide High Performance Filters for High Current Three Phase Applications ADT Series UL Recognized ADT6/ADT6S ADT Series Designed with very high insertion loss for Delta applications, these three phase filters work well in industrial applications to bring high current motor drives into compliance with the European EMC Directives. The series offers filters between 63 and 200 amps at 480 VAC phase-to-phase. It is available with common or differential mode (S models) coils for the correct protection to fit the application. Specifications Maximum leakage current, each line-to-ground ADT6/ADT6S 63ADT6S Hipot rating (one minute): line-to-ground line-to-line Operating frequency: Rated voltage: phase-to-phase: phase-to-ground: 0.76A/2.7A @ 230V 50 Hz 1.5A @ 230V 50 Hz 2250 VDC 2160 VDC 50/60 Hz 480 VAC 277 VAC Electrical Schematics ADT6 Typical insertion loss in dB: Line-to-ground in 50 ohm circuit: Current Rating 0063ADT6 0100ADT6 0160ADT6 0200ADT6 063ADT6S 100ADT6S 160ADT6S 200ADT6S LOAD .01 45 45 45 45 28 38 37 35 .1 85 85 80 77 45 60 58 54 Frequency-MHz 1 10 30 95 100 100 90 100 100 90 100 100 88 100 100 90 90 90 95 100 100 85 100 100 80 100 100 100 100 100 100 100 90 100 100 100 300 100 100 100 100 90 100 100 100 LINE Line-to-line in 50 ohm circuit: ADT6S Current Rating 0063ADT6 0100ADT6 0160ADT6 0200ADT6 063ADT6S 100ADT6S 160ADT6S 200ADT6S LOAD .01 35 43 44 43 35 43 44 43 .1 100 100 100 100 100 100 100 100 Frequency-MHz 1 10 30 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 300 100 100 100 100 100 100 100 100 LINE 10 Catalog 1654001 Revised 03-04 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 1-508-992-4495 Germany: 49-89-6089-0 www.cor.com www.tycoelectronics.com CORCOM Product Guide High Performance Filters for High Current Three Phase Applications (Continued) ADT Series RFI Power Line Filters Case Style A E Case Dimensions Part No. 63ADT6 A (max) B (max) 10.00 254.0 10.00 254.0 10.00 254.0 11.00 279.4 10.00 254.0 13.00 330.2 C (max) 3.50 89.0 4.50 114.3 4.50 114.3 4.50 114.3 4.50 114.3 4.50 114.3 D ± .030 ± .76 E (max) 10.00 254.0 15.00 381.0 15.00 381.0 15.00 381.0 15.00 381.0 18.00 457.2 1.18 x .56 Cutout 2.00 50.8 1.00 25.4 .69 17.5 14.00 355.6 19.00 63ADT6S 482.6 19.00 100ADT6 482.6 19.00 100ADT6S 482.6 19.00 160/200ADT6 482.6 160/200ADT6S 22.00 558.8 3/8 - 16 Steel 8.50 216.0 8.50 216.0 8.50 216.0 8.50 216.0 8.50 216.0 11.50 292.2 Part Numbers 1.00 25.4 2.00 50.8 .75 19.0 063ADT6 100ADT6 160ADT6 200ADT6 063ADT6S 100ADT6S 160ADT6S 200ADT6S DB C Terminals: 63ADT6, 63ADT6S, 100ADT6S: Torque (Max.): 70 in.lb. 3/8-16 (6) 100ADT6, 160ADT6, 160ADT6S, 200ADT6, 200ADT6S: 7/16-20 (6) Torque (Max.): 125 in.lb. 11 Catalog 1654001 Revised 03-04 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 1-508-992-4495 Germany: 49-89-6089-0 www.cor.com www.tycoelectronics.com