BPE-494

HARTMAN Aerospace Power Products Plug-In ContactorsTM Features: • 3PST N.O. ELCU Main Contacts • Senses Differential Fault • Overload Protection • Less than 10µ contact chatter during high vibration • 115/200 VAC, 400 Hz • 175 Amps • High Reliability • Meets many requirements of MIL-R-6106 • Light Weight Construction BPE-494 3PST N.O. ELCU, 175 Amps, 115/200 VAC, 400 Hz CONTACTOR CONFIGURATION Dimensions for this product are expressed in inches. Multiply values by 25.4 for millimeters. PRODUCT SPECIFICATIONS Construction Main Contacts: Configuration Voltage (Nominal) Current Coil Data: Duty Cycle Voltage (Nominal) Pick-Up Voltage Drop-Out Voltage Coil Current @ 28 VDC & +25°C In-Rush Hold Operating Temperature Life: Electrical Mechanical Weight Gasket Sealed, Vented, Plug-In 3PST N.O. 115/200 VAC, 400 Hz 175 Amps Continuous 28 VDC 18 VDC Maximum 1.5 - 10 VDC 6.5 Amps Maximum 1.0 Amp Maximum -15°C to +70°C 50,000 Cycles 100,000 Cycles 4 Lbs. 4 Oz. ELCU CONTROL Overcurrent: Pin programmable for 20 to 60 kVA rating. I2t trip. Differential Trip: 10 - 30 Amps when used in conjunction with external current transformers. Hard Fault: Instantaneous trip if DC supply drops below 10 volts and fault current is greater than 250 Amps. Anti-Cycle: DC supply can drop to 5 VDC for up to 0.200 Sec after a trip and the unit will not reset. Unit must reset if the DC supply drops below 5 VDC for 0.350 Sec after a trip. Command Reset: Open COMMAND line for 0.005 Sec min. and reapply ground. Command Trip: Commit to trip activating lockout within 0.005 Sec, main contacts open within 0.015 Sec. Current Monitor: Three phase levels monitored and provided as pulse width modulated output. 50% Mark Space = 0 Amps 75% Mark Space = 175 Amps Notes: For factory-direct application assistance, contact the HARTMAN product team at (419) 521-9500, Fax (419) 526-2749. © 2004 by Tyco Electronics Corporation. All Rights Reserved. HARTMAN and TYCO are trademarks. Catalog (web doc only) Revised 5-04 www.tycoelectronics.com Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-5-729-0425 South America: 55-11-3611-1514 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 44-141-810-8967