SF35-AP

MCC TM Micro Commercial Components SF31 THRU SF38
  omponents 20736 Marilla Street Chatsworth    !"# $ %    !"# Features • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) • Epoxy meets UL 94 V-0 flammability rating • Moisture Sensitivity Level 1 • • • High Surge Capability Marking: Type Number Halogen free available upon request by adding suffix "-HF" 3.0 Amp Super Fast Rectifier 50 to 600 Volts Maximum Ratings • Operating Temperature: -55°C to +125°C • • DO-201AD Storage Temperature: -55°C to +150°C For capacitive load, derate current by 20% MCC Part Number SF31 SF32 SF33 SF34 SF35 SF36 SF38 Maximum Recurrent Peak Reverse Voltage 50V 100V 150V 200V 300V 400V 600V Maximum RMS Voltage Maximum DC Blocking Voltage 35V 70V 105V 140V 210V 280V 420V 50V 100V 150V 200V 300V 400V 600V D A Cathode Mark B Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage SF31-SF34 SF35-SF36 SF38 Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance SF31-SF34 SF35-SF38 Maximum Reverse Recovery Time IF(AV) 3.0 A TC = 55°C IFSM 100A 8.3ms, half sine VF .95V 1.3V 1.7V IFM = 3.0A; TC = 25°C IR 5.0µA 100µA TC= 25°C TC = 100°C CJ 100pF 80pF Measured at 1.0MHz, VR=4.0V IF=0.5A, IR=1.0A, Irr=0.25A Trr 35ns D C DIMENSIONS DIM A B C D INCHES MIN MAX .287 .374 .189 .208 .048 .052 1.000 --- MM MIN 7.30 4.80 1.20 25.40 MAX 9.50 5.30 1.30 --- NOTE Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: B 1 of 4 2013/01/01 MCC SF31 thru SF38 TM Micro Commercial Components Figure 1 Typical Reverse Characteristics Figure 2 Typical Forward Characteristics SF31-SF34 SF35 -SF36 10 1000 Tj =100°C uAmps 100 Amps SF38 1 Tj =25°C 10 0.1 0.01 1 20 40 60 80 100 120 Volts Instantaneous Reverse Current - uAmperes versus Percent of Rated Peak Reverse Voltage - % 0.6 0.8 1.0 1.2 1.4 1.6 Volts Instantaneous Forward Current - Amperes versus Instantaneous Forward Voltage - Volts Figure 3 Forward Derating Curve 3.0 2.5 2.0 1.5 Amps 1.0 0.5 0 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 25 50 75 100 125 150 °C Average Forward Rectified Current Per Leg - Amperes versus Case Temperature - °C www.mccsemi.com Revision: B 2 of 4 2013/01/01 MCC SF31 thru SF38 TM Micro Commercial Components 200 120 JUNCTION CAPACITANCE.(pF) PEAK FORWARD SURGE CURRENT. (A) 140 8.3ms Single Half Sine Wave JEDEC Method 100 80 60 40 20 0 Figure 5 Figure 4 Maximum Non-repetitive Forward Surge Current 1 2 5 10 20 50 Typical Junction Capacitance 180 160 140 120 SF 100 ~S 35~ 80 60 .1 100 NUMBER OF CYCLES AT 60Hz 31 SF .5 1 F3 4 SF 38 2 5 10 20 REVERSE VOLTAGE. (V) 50 100 200 500 1000 Figure 6 Reverse Recovery Time Characteristic And Test Circuit Diagram 50Ω 10Ω +0.5A trr 0 Pulse Generator Note 2 25Vdc 1Ω Oscilloscope Note 1 -0.25 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive www.mccsemi.com 3 of 4 Revision: B 2013/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 1.2Kpcs/Reel Part Number-AP Ammo Packing: 1.2Kpcs/Ammo Box Part Number-BP Bulk: 12Kpcs/Carton Note : Adding "-HF" suffix for halogen free, eg. Part Number-TP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: B 4 of 4 2013/01/01