5.0SMDJ110A

MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 5.0 SMDJ SERIES SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 5000 Watt Peak Pulse Power FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition rate (duty cycle):0.01% • Fast response time: typically less than 1.0 ps from 0 volts to BV for unidirectional types • Typical IR less than 1µA above 10V • High temperature soldering: 250°C/10 seconds at terminals • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O MECHANICAL DATA Case: JEDEC DO214AB. Molded plastic over glass passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denoted positive end (cathode) except Bidirectional Standard Packaging: 16mm tape (EIA STD RS-481) Weight: 0.007 ounces, 0.021 grams) Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA Suffix for types 5.0SMDJ5.0 thru types 5.0SMDJ170 (e.g. 5.0SMDJ5.0C, 5.0SMDJ170CA) Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. RATING Peak Pulse Power Dissipation on 10/1000 µs waveform (NOTE 1, 2, Fig.1) Peak Pulse Current of on 10/1000 µs waveform (Note 1,Fig 3) Peak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load, (JEDEC Method)(Note2, 3) Operatings and Storage Temperature Range SYMBOL PPPM IPPM VALUE Minimum 5000 SEE TABLE 1 400 -55 +150 UNITS Watts Amps Amps °C IFSM TJ, TSTG NOTES: 1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2. 2. Mounted on 8.0mm x 8.0mm Copper Pads to each terminal. 3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum. Certified RoHS Compliant UL File # E223026 MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com RATING AND CHARACTERISTIC CURVES 5.0SMDJ SERIES Fig. 1 - Peak Pulse Power Rating Curve 100 Fig.2 - Pulse Derating Curve 100 PPPM-Peak Pulse Power (kW) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage,% Non-repetitive pulse waveform shown in Fig.3 TA = 25°C 87.5 75 62.5 50 37.5 25 12.5 0 10 1 0.1 0.1μs 0 25 50 75 100 125 150 175 200 1.0μs 10μs 100μs 1.0ms 10ms TA - Ambient Temperature (°C) td - Pulse Width (sec.) IPPM - Peak Pulse Current,% IRSM 150 Fig.3 - Pulse Waveform tr = 10μsec. TJ = 25°C Pulse Width(td)is defined as the point where the peak current decays to 50% of IPPM 10000 10000 Fig. 4 - Typical Junction Capacitance Unidirectional Bidirectional VR = 0 100 1000 CJ - Capacitance (pF) Peak Value IPPM Half Value- IPPM 2 1000 50 10/1000μsec.Waveform as defined by R.E.A. 100 100 VR = Rated Stand-off f = 1MHz Vsig = 50mVp-p TJ = 25°C td 0 0 1.0 2.03.0 3.0 4.0 10 4.0 1 10 5 10 t - Time(ms) Fig. 5 - Steady State Power Derating Curve 300 VWM - Reverse Stand-Off Voltage (V) Fig.6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only 8.3ms Single Half Sine-Wave (JEDEC Method)TJ=TJ max. 250 10 100 500 1000 8.0 7.0 PM(AV),Steady State Power Dissipation (W) 60Hz Resistive or Inductive Load 6.0 5.0 4.0 3.0 2.0 1.0 0 0 25 50 75 100 125 150 175 200 IFSM-Peak Forward Surge Current (A) 200 150 100 1 10 100 TL - Lead Temperature (°C) Number of Cycles at 60 Hz MDE Semiconductor, Inc. 78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414 1-800-831-4881 Email: sales@mdesemiconductor.com Web: www.mdesemiconductor.com 5000 Watt Surface Mount TVS UNI-POLAR BI-POLAR DEVICE MARKING CODE UNI BI REVERSE REVERSE BREAKDOWN BREAKDOWN MAXIMUM PEAK TEST VOLTAGE CURRENT CLAMPING VOLTAGE STANDOFF PULSE LEAKAGE VBR (V) VBR (V) VOLTAGE VOLTAGE CURRENT @ VRWM (IT ) VRWM (V) @IPP VC (V) IPP (A) MIN. @ IT MAX. @ IT IR (µA) mA 5.0SMDJ11A 5.0SMDJ12A 5.0SMDJ13A 5.0SMDJ14A 5.0SMDJ15A 5.0SMDJ16A 5.0SMDJ17A 5.0SMDJ18A 5.0SMDJ20A 5.0SMDJ22A 5.0SMDJ24A 5.0SMDJ26A 5.0SMDJ28A 5.0SMDJ30A 5.0SMDJ33A 5.0SMDJ36A 5.0SMDJ40A 5.0SMDJ43A 5.0SMDJ45A 5.0SMDJ48A 5.0SMDJ51A 5.0SMDJ54A 5.0SMDJ58A 5.0SMDJ60A 5.0SMDJ64A 5.0SMDJ70A 5.0SMDJ75A 5.0SMDJ78A 5.0SMDJ85A 5.0SMDJ90A 5.0SMDJ100A 5.0SMDJ110A 5.0SMDJ120A 5.0SMDJ130A 5.0SMDJ150A 5.0SMDJ160A 5.0SMDJ170A 5.0SMDJ11CA 5.0SMDJ12CA 5.0SMDJ13CA 5.0SMDJ14CA 5.0SMDJ20CA 5.0SMDJ20CA 5.0SMDJ20CA 5.0SMDJ20CA 5.0SMDJ20CA 5.0SMDJ22CA 5.0SMDJ24CA 5.0SMDJ26CA 5.0SMDJ28CA 5.0SMDJ30CA 5.0SMDJ33CA 5.0SMDJ36CA 5.0SMDJ40CA 5.0SMDJ43CA 5.0SMDJ45CA 5PEN 5PEP 5PEQ 5PER 5PES 5PET 5PEU 5PEV 5PEW 5PEX 5PEZ 5PFE 5PFG 5PFK 5PFM 5PFP 5PFR 5PFT 5PFV 5PFX 5PFZ 5PGE 5PGG 5PGK 5PGM 5PGP 5PGR 5PGT 5PGV 5PGX 5PGZ 5PHE 5PHG 5PHK 5PHM 5PHP 5PHR 5BEN 5BEP 5BEQ 5BER 5BES 5BET 5BEU 5BEV 5BEW 5BEX 5BEZ 5BFE 5BFG 5BFK 5BFM 5BFP 5BFR 5BFT 5BFV 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 78.0 85.0 90.0 100.0 110.0 120.0 130.0 150.0 160.0 170.0 12.20 13.30 14.40 15.60 16.70 17.80 18.90 20.00 22.20 24.40 26.70 28.90 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 86.70 94.40 100.00 111.00 122.00 133.00 144.00 167.00 178.00 189.00 13.50 14.70 15.90 17.20 18.50 19.70 20.90 22.10 24.50 26.90 29.50 31.90 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 95.80 104.00 111.00 123.00 135.00 147.00 159.00 185.00 197.00 209.00 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 275.0 252.0 233.0 216.0 205.0 193.0 181.0 172.0 155.0 141.0 129.0 119.0 110.0 103.0 93.9 86.1 77.6 72.1 68.8 64.7 60.7 57.5 53.5 51.7 48.6 44.3 41.4 39.7 36.5 34.3 30.9 28.3 26.0 24.0 20.6 19.3 18.2 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 For bidirectional type having Vrwm of 10 volts and less, the IR limit is double. For parts without A , the VBR is ± 10% Certified RoHS Compliant UL File # E223026