U1010-QH

17.0-34.0 GHz Up-Converter QFN, 4x4mm February 2010 - Rev 12-Feb-10 U1010-QH Features Integrated Balanced Mixer, LO Buffer and LO Doubler +23.0 dBm Input Third Order Intercept (IIP3) +2.0 dBm LO Drive Level 4x4mm QFN Package 100% RF and DC Testing General Description Mimix Broadband’s 17.0-34.0 GHz GaAs packaged up-converter has an input third order intercept point of +23.0 dBm and 10.0 dB of conversion loss. The device consists of a balanced resistive pHEMT mixer, LO buffer amplifier and LO doubler packaged in an industry standard, fully molded 4x4mm QFN package. IF and *IF mixer inputs are provided and an external 180 degree hybrid is required. The device includes on-chip ESD protection structures and DC by-pass capacitors to ease the implementation and volume assembly of the packaged part. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications. Absolute Maximum Ratings1 Drain Voltage Supply (Vdd) Drain Current (Ids) Input Power (Pin) IF Input Power (Pin) LO Storage Temperature (Tstg) Operating Temperature (Tb) ESD Min. - Machine Model (MM) ESD Min. - Human Body Model (HBM) MSL Level +4.3V 350 mA +5 dBm +10 dBm -65 to +165 ºC -55 to +85 ºC Class A Class 0 MSL3 Electrical Characteristics (Ambient Temperature T = 25 oC) Parameter Frequency Range (RF) Frequency Range (LO) Frequency Range (IF) Conversion Loss (CL) Input Third Order Intercept (IIP3) LO Input Drive RF Input Return Loss LO Input Return Loss IF Input Return Loss 2xLO Leakage at RF 1xLO Leakage at RF Drain Bias Voltage (Vd1,2) Gate Bias Voltage (Vg1) Gate Bias Voltage (Vg2,3) Gate Bias Voltage (Vss) Supply Current (Id1) Supply Current (Id2) Supply Current (Iss) Units GHz GHz GHz dB dBm dBm dB dB dB dBm dBm VDC VDC VDC VDC mA mA mA Min. 17 8 DC Typ. Max. 34 20 3.5 10 23 2 15 15 15 -20 -30 4.0 ~ -0.2 -0.8 -4.0 130 ~ 60 45 Page 1 of 5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 17.0-34.0 GHz Up-Converter QFN, 4x4mm February 2010 - Rev 12-Feb-10 U1010-QH Up-Converter Measurements XU1010-QH, Glob Top, R10C2: LSB Conversion Loss & IIP3 vs. RF, PLO = 2 dBm, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz, Doubler and Mixer bias swept 30 USB Conversion Gain/ IIP3 (dB/dBm) LSB Conversion Gain/ IIP3 (dB/dBm) 25 20 15 10 5 0 -5 -10 -15 -20 14 16 18 20 22 24 26 28 30 32 34 36 38 LSB RF (GHz) [IF = 2 GHz] Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.6 Loss, VD2 (V)=5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=5, VG2VG3 (V)=-0.6 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.6 XU1010-QH, Glob Top, R10C2: USB Conversion Loss & IIP3 vs. RF, PLO = 2 dBm, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz, Doubler and Mixer bias swept 30 25 20 15 10 5 0 -5 -10 -15 -20 14 16 18 20 22 24 26 28 30 32 34 36 38 USB RF (GHz) [IF = 2 GHz] Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=4.5, VG2VG3 (V)=-0.6 IIP3 IIP3 Loss, VD2 (V)=5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=5, VG2VG3 (V)=-0.6 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.8 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.7 Loss, VD2 (V)=5.5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=4.5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=5, VG2VG3 (V)=-0.6 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.8 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.7 IIP3, VD2 (V)=5.5, VG2VG3 (V)=-0.6 Loss Loss VD1 = 5 V, ID1 = 140 mA, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V VD1 = 5 V, ID1 = 140 mA, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V XU1010-QH: LSB IIP3 & Loss vs. ID1 (LO buffer), PLO = 4 dBm, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz 35 30 LSB Conv. Loss & IIP3 (dB/dBm) 25 20 15 10 5 0 -5 -10 -15 -20 60 80 100 120 140 160 180 200 ID1 (mA) IIP3, RF=16, VD1 (V)=4.5 IIP3, RF=16, VD1 (V)=5 IIP3, RF=16, VD1 (V)=5.5 IIP3, RF=18, VD1 (V)=4.5 IIP3, RF=18, VD1 (V)=5 IIP3, RF=18, VD1 (V)=5.5 IIP3, RF=20, VD1 (V)=4.5 XU1010-QH: USB IIP3 & Loss vs. ID1 (LO buffer), PLO = 4 dBm, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz 35 30 USB Conv. Loss & IIP3 (dB/dBm) 25 20 15 10 5 0 -5 -10 -15 -20 60 80 100 120 140 160 180 200 ID1 (mA) IIP3, RF=16, VD1 (V)=4.5 IIP3, RF=16, VD1 (V)=5 IIP3, RF=16, VD1 (V)=5.5 IIP3, RF=18, VD1 (V)=4.5 IIP3, RF=18, VD1 (V)=5 IIP3, RF=18, VD1 (V)=5.5 IIP3, RF=20, VD1 (V)=4.5 IIP3, RF=20, VD1 (V)=5 IIP3, RF=20, VD1 (V)=5.5 IIP3, RF=22, VD1 (V)=4.5 IIP3, RF=22, VD1 (V)=5 IIP3, RF=22, VD1 (V)=5.5 IIP3, RF=24, VD1 (V)=4.5 IIP3, RF=24, VD1 (V)=5 IIP3, RF=24, VD1 (V)=5.5 IIP3, RF=26, VD1 (V)=4.5 IIP3, RF=26, VD1 (V)=5 IIP3, RF=26, VD1 (V)=5.5 IIP3, RF=28, VD1 (V)=4.5 IIP3, RF=28, VD1 (V)=5 IIP3, RF=28, VD1 (V)=5.5 IIP3, RF=30, VD1 (V)=4.5 IIP3, RF=30, VD1 (V)=5 IIP3, RF=30, VD1 (V)=5.5 IIP3, RF=32, VD1 (V)=4.5 IIP3, RF=32, VD1 (V)=5 IIP3, RF=32, VD1 (V)=5.5 IIP3, RF=34, VD1 (V)=4.5 IIP3, RF=34, VD1 (V)=5 IIP3, RF=34, VD1 (V)=5.5 IIP3 IIP3, RF=20, VD1 (V)=5 IIP3, RF=20, VD1 (V)=5.5 IIP3, RF=22, VD1 (V)=4.5 IIP3, RF=22, VD1 (V)=5 IIP3, RF=22, VD1 (V)=5.5 IIP3, RF=24, VD1 (V)=4.5 IIP3, RF=24, VD1 (V)=5 IIP3, RF=24, VD1 (V)=5.5 IIP3, RF=26, VD1 (V)=4.5 IIP3, RF=26, VD1 (V)=5 IIP3, RF=26, VD1 (V)=5.5 IIP3, RF=28, VD1 (V)=4.5 IIP3, RF=28, VD1 (V)=5 IIP3, RF=28, VD1 (V)=5.5 IIP3, RF=30, VD1 (V)=4.5 IIP3, RF=30, VD1 (V)=5 IIP3, RF=30, VD1 (V)=5.5 IIP3, RF=32, VD1 (V)=4.5 IIP3, RF=32, VD1 (V)=5 IIP3, RF=32, VD1 (V)=5.5 IIP3, RF=34, VD1 (V)=4.5 IIP3, RF=34, VD1 (V)=5 IIP3, RF=34, VD1 (V)=5.5 IIP3 Loss Loss VD1 = 4.5, 5 & 5.5 V, ID1 swept, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V VD1 = 4.5, 5 & 5.5 V, ID1 swept, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V XU1010-QH, Glob Top, R10C2: 1xLO output power @ RF port, PLOswp, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz 0 1xLO output power @ RF port (dBm) -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1xLO (GHz) [IF = 2 GHz] 1xLO, Side=LSB, PLO (dBm)=0 1xLO, Side=LSB, PLO (dBm)=2 1xLO, Side=LSB, PLO (dBm)=4 1xLO, Side=LSB, PLO (dBm)=5 1xLO, Side=USB, PLO (dBm)=0 1xLO, Side=USB, PLO (dBm)=2 1xLO, Side=USB, PLO (dBm)=4 1xLO, Side=USB, PLO (dBm)=5 XU1010-QH, Glob Top, R10C2: 2xLO output power @ RF port, PLOswp, PIFscl = 0 dBm, IF1 - IF2 = 10 MHz 0 2xLO output power @ RF port (dBm) -5 -10 -15 -20 -25 -30 -35 -40 -45 -50 -55 -60 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 2xLO (GHz) [IF = 2 GHz] 2xLO, Side=LSB, PLO (dBm)=0 2xLO, Side=LSB, PLO (dBm)=2 2xLO, Side=LSB, PLO (dBm)=4 2xLO, Side=LSB, PLO (dBm)=5 2xLO, Side=USB, PLO (dBm)=0 2xLO, Side=USB, PLO (dBm)=2 2xLO, Side=USB, PLO (dBm)=4 2xLO, Side=USB, PLO (dBm)=5 -5 VD1 = 5 V, ID1 = 140 mA, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V VD1 = 5 V, ID1 = 140 mA, VD2 = 5 V, VG2VG3 = - 0.8 V, VSS = - 5 V Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 17.0-34.0 GHz Up-Converter QFN, 4x4mm February 2010 - Rev 12-Feb-10 U1010-QH App Note [1] Biasing - As shown in the Pin Designations table, the device is operated by biasing VD1 and VD2 at 4.0V with 130mA and approximately 60mA respectively. VG2,3 and VSS require fixed voltage biasing with VSS biased at -4.0V and 45mA. It is recommended to use active bias on VG1 to keep the current in VD1 constant in order to maintain the best performance over temperature. Depending on the supply voltage available and the power dissipation constraints, the bias circuit may be a single transistor or a low power operational amplifier, with a low value resistor in series with the drain supply used to sense the current. The gate of the pHEMT is controlled to maintain correct drain current and thus drain voltage. The typical gate voltage needed to do this is -0.2V. Make sure to sequence the applied voltage to ensure negative gate bias is available before applying the positive drain supply. App Note [2] Board Layout - As shown in the board layout, it is recommended to provide 100pF decoupling caps as close to the bias pins as possible, with additional 10µF decoupling caps. Recommended Board Layout Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 17.0-34.0 GHz Up-Converter QFN, 4x4mm February 2010 - Rev 12-Feb-10 U1010-QH Package Dimensions / Layout Functional Block Diagram NC 24 GND 23 RF 22 GND 21 NC 20 VG2,3 19 Pin Designations Nominal Value Pin Function Pin Number Pin Name GND 1 IF1 IF1 Output 2 3-4 NC Not Connected IF2 Output 5 IF2 GND 6-8 NC Not Connected 7 8 GND LO Input 9 LO 10 GND NC Not Connected 11-12 4.0V, 130 mA 13 VD1 LO Buffer Drain 4.0V, 60 mA VD2 LO Doubler Drain 14 GND 15-16 4.0V, 45 mA 17 VSS Doubler/ESD Bias LO Buffer Gate -0.2V 18 VG1 -0.8V VG2,3 LO Doubler/Mixer Gate 19 NC Not Connected 20 21 GND RF RF Input 22 23 GND NC Not Connected 24 Page 4 of 5 GND IF1 NC NC IF2 GND 1 2 3 4 5 6 ESD ESD MIXER 0o 180 o 18 17 16 VG1 VSS GND GND VD2 VD1 BUF 15 14 x2 13 10 NC GND LO GND NC 11 NC Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 12 7 8 9 17.0-34.0 GHz Up-Converter QFN, 4x4mm February 2010 - Rev 12-Feb-10 U1010-QH Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: • Do not ingest. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Electrostatic Sensitive Device - Observe all necessary precautions when handling. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Typical Reflow Profiles Reflow Profile Ramp Up Rate Activation Time and Temperature Time Above Melting Point Max Peak Temperature Time Within 5 ºC of Peak Ramp Down Rate SnPb 3-4 ºC/sec 60-120 sec @ 140-160 ºC 60-150 sec 240 ºC 10-20 sec 4-6 ºC/sec Pb Free 3-4 ºC/sec 60-180 sec @ 170-200 ºC 60-150 sec 265 ºC 10-20 sec 4-6 ºC/sec Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Part Number for Ordering XU1010-QH-0G00 XU1010-QH-0G0T XU1010-QH-EV1 Description Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in bulk quantity Matte Tin plated RoHS compliant 4x4 24L QFN surface mount package in tape and reel XU1010-QH evaluation board Appropriate precautions in handling, packaging and testing devices must be observed. C a u t i o n : E S D S e n s i t i ve Proper ESD procedures should be followed when handling this device. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 5 Characteristic Data and Specifications are subject to change without notice. ©2010 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.