Ultra High Dynamic Range
Monolithic Amplifier
50Ω
PHA-1+
0.05 to 6 GHz
The Big Deal
• Ultra High IP3
• Broadband High Dynamic Range without
external Matching Components
• May be used as a replacement to WJ AH1a,b
FREE
X-Parameters*
SOT-89 PACKAGE
☛ LTE Performance
☛ TD-SCDMA Performance
Product Overview
PHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and
offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition,
the PHA-1+, unlike competitive models, has good input and output return loss over a broad frequency
range without the need for external matching components and has demonstrated excellent reliability. It has
repeatable performance from lot to lot and is enclosed in a SOT-89 package for very good thermal performance.
Key Features
Feature
Broad Band: 0.05 to 6.0 GHz
Extremely High IP3
Versus DC power Consumption
42 dBm typical at 2 GHz
No External Matching Components
Required
Low Noise Figure: 2.3dB typ. up to 4 GHz
3.5dB typ. up to 6 GHz
Advantages
Broadband covering primary wireless communications bands:
Cellular, PCS, LTE, WiMAX
The PHA-1+ matches industry leading IP3 performance relative to device size and power consumption. The combination of the design and E-PHEMT Structure provides enhanced linearity over a broad frequency range as evidence in the IP3 being typically 20
dB above the P 1dB point. This feature makes this amplifier ideal for use in:
• Driver amplifiers for complex waveform up converter paths
• Drivers in linearized transmit systems
• Secondary amplifiers in ultra High Dynamic range receivers
Unlike competing products, Mini-Circuits PHA-1+ provides Input and Output Return Loss of
14-21 dB up to 4 GHz without the need for any external matching components
A unique feature of the PHA-1+ which separates this design from all competitors is the
low noise figure performance in combination with the high dynamic range.
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical
performance criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The WJ AH1 part number is used for identification and comparison purposes only.
* X-parameters is a registered trademark of Agilent Technologies, Inc. The X-parameters format and underlying equations are open and documented.
For more information, refer to X-parameters Open Documentation, Trademark Usage & Partnerships
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 1 of 2
Ultra High Dynamic Range
Monolithic Amplifier
0.05-6 GHz
Product Features
• High IP3, 42 dBm typ. at 2 GHz, 5V
• Gain, 13.5 dB typ. at 2 GHz, 5V
• High Pout, P1dB 22 dBm typ. at 2 GHz, 5V
• Low noise figure, 2.2 dB @2 GHz, 5V
• Usable to 4.0V
• No external matching components required
• May be used as replacement for WJ AH1a,b
Generic photo used for illustration purposes only
CASE STYLE: DF782
PHA-1+
Typical Applications
• Base station infrastructure
• Portable Wireless
• CATV & DBS
• MMDS & Wireless LAN
• LTE
+RoHS Compliant
The +Suffix identifies RoHS Compliance. See our web site
for RoHS Compliance methodologies and qualifications
☛ LTE Performance
☛ TD-SCDMA Performance
General Description
PHA-1+ (RoHS compliant) is an advanced wideband amplifier fabricated using E-PHEMT technology and
offers extremely high dynamic range over a broad frequency range and with low noise figure. In addition,
the PHA-1+ has good input and output return loss over a broad frequency range without the need for
external matching components. It has repeatable performance from lot to lot and is enclosed in a SOT-89
package for very good thermal performance.
simplified schematic and pin description
3 RF-OUT & DC-IN
RF-OUT
and DC-IN
RF-IN
2 GROUND
4
1 RF-IN
GND
Function
Pin Number
RF IN
1
RF input pin. This pin requires the use of an external DC blocking capacitor chosen for
the frequency of operation.
RF-OUT and DC-IN
3
RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking
capacitor is necessary for proper operation. An RF choke is needed to feed DC bias
without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”, Fig. 2
GND
2,4
Description
Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design”
to reduce ground path inductance for best performance.
Notes:
a. Suitability for model replacement within a particular system must be determined by and is solely the responsibility of the customer based on, among other things, electrical performance
criteria, stimulus conditions, application, compatibility with other components and environmental conditions and stresses.
b. The WJ AH1 part number is used for identification and comparison purposes only.
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
REV. E
M151107
PHA-1+
TH/RS/CP/AM
200217
Page 2 of 2
PHA-1+
Monolithic E-PHEMT MMIC Amplifier
Electrical Specifications at 25°C, unless noted
Parameter
Vd=5.0V(1)
Typ.
Max.
6.0
0.05-6.0
0.05-6.0
15.4
17.2
19.4
17.5
17.3
0.8
14.1
15.7
17.3
15.5
15.2
2.0
—
13.5
—
13.4
13.1
3.0
—
11.8
—
11.8
11.4
4.0
9.6
10.7
12.3
10.7
10.4
6.0
—
9.7
—
9.6
9.2
0.05
—
11.7
—
10.7
10.6
0.8
13.0
17.0
—
16.5
16.1
2.0
—
11.3
—
11.7
11.4
3.0
—
10.2
—
10.4
10.1
4.0
—
10.2
—
9.7
9.5
6.0
—
8.6
—
7.3
7.3
0.05
—
14.5
—
13.7
13.5
0.8
13.0
20.8
—
19.5
18.3
2.0
—
17.1
—
16.1
14.7
3.0
—
15.3
—
14.1
13.4
4.0
—
13.8
—
12.8
12.2
6.0
—
11.0
—
10.2
9.7
19.3
18.9
dB
dBm
Condition
(GHz)
Min.
0.05
Frequency range
Gain
0.05
Input Return Loss
Output Return Loss
Vd=4.5V(2) Vd=4.0V(2)
Typ.
Typ.
Reverse Isolation
2.0
Output Power @1 dB compression
0.05
20.0
22.2
—
21.5
20.0
0.8
20.0
22.6
—
21.3
19.9
2.0
20.0
22.4
—
21.4
19.9
3.0
—
22.7
—
21.6
20.1
4.0
—
22.7
—
21.5
20.1
6.0
—
21.6
—
20.3
19.2
0.05
—
41.4
—
36.8
34.4
0.8
37.0
41.1
—
40.0
36.3
2.0
—
42.0
—
37.1
34.0
3.0
—
42.3
—
36.3
33.3
4.0
—
40.8
—
35.8
32.7
6.0
—
38.8
—
33.9
31.2
Output IP3
Noise Figure
19.9
0.05
1.7
1.9
1.8
1.0
1.9
2.3
2.1
2.0
2.2
2.4
2.2
3.0
2.3
2.5
2.5
4.0
2.7
3.0
2.9
6.0
3.5
3.7
3.6
Units
GHz
dB
dB
dB
dBm
dB
Device Operating Voltage
4.8
5.0
5.2
4.5
4.0
V
Device Operating Current
110
146
180
119
95
mA
Device Current Variation vs. Temperature(3)
Device Current Variation vs Voltage
Thermal Resistance, junction-to-ground lead
-12
68
67
µA/°C
0.054
0.052
0.052
mA/mV
60
60
60
°C/W
(1)
Measured on Mini-Circuits Characterization test board TB-313. See Characterization Test Circuit (Fig. 1)
(2)
Measured on Mini-Circuits test fixture 90-6-20-26 characterization Circuit (Fig.1), except replace TB-313 with 90-6-20-26
(3)
(Current at 85°C —
Current at -45°C)/130
Absolute Maximum Ratings
Parameter
-40°C to 85°C
Storage Temperature
-65°C to 150°C
210 mA
Power Dissipation
1W
Input Power (CW)
24 dBm
DC Voltage on Pin 3
USL
DC Current Histogram
Ratings
Operating Temperature (ground lead)
Operating Current at 5V
LSL
6V
175
170
165
160
155
150
145
140
135
130
125
120
115
110
Note:
Permanent damage may occur if any of these limits are exceeded.
Electrical maximum ratings are not intended for continuous normal operation.
DC Current (mA)
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 3 of 4
PHA-1+
Monolithic E-PHEMT MMIC Amplifier
Characterization Test Circuit
Vcc (Supply voltage)
3 +5V
1
RF-IN
2,4
DUT
BLK-18+
RF-OUT
Bias-Tee
ZX85-12G-S+
TB-313
Fig 1. Block Diagram of Test Circuit used for characterization. (DUT soldered on Mini-Circuits Characterization test board TB-313)
Gain, Return loss, Output power at 1dB compression (P1 dB) , output IP3 (OIP3) and noise figure measured using Agilent’s N5242A
PNA-X microwave network analyzer.
Conditions:
1. Gain and Return loss: Pin= -25dBm
2. Output IP3 (OIP3): Two tones, spaced 1 MHz apart, 5 dBm/tone at output.
Recommended Application Circuit
Vcc
Cbypass
4
Cblock
IN
Ibias
3
RFC
Vd
1
2
OUT
Cblock
Fig 2. Test Board includes case, connectors, and components soldered to PCB
Product Marking
PHA1
Marking may contain other features or characters for internal lot control
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 4 of 4
PHA-1+
Monolithic E-PHEMT MMIC Amplifier
Additional Detailed Technical Information
additional information is available on our dash board. To access this information click here
Data Table
Performance Data
Swept Graphs
S-Parameter (S2P Files) Data Set (.zip file)
DF782 (SOT 89) Plastic package, exposed paddle
Case Style
lead finish: matte-tin
Tape & Reel
F55
Standard quantities available on reel
7” reels with 20, 50, 100, 200, 500 or 1K devices
Suggested Layout for PCB Design
PL-313
Evaluation Board
TB-545-1+
Environmental Ratings
ENV08T1
ESD Rating
Human Body Model (HBM): Class 1A (250 to 25V) in accordance with ANSI/ESD STM5.2-1999
MSL Rating
Moisture Sensitivity: MSL1 in accordance with IPC/JEDEC J-STD-020D
MSL Test Flow Chart
Start
Visual
Inspection
Electrical Test
SAM Analysis
Reflow 3 cycles,
260°C
Soak
85°C/85RH
168 hours
Bake at 125°C,
24 hours
Visual
Inspection
Electrical Test
SAM Analysis
Notes
A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document.
B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions.
C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled
to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp
Mini-Circuits
®
www.minicircuits.com P.O. Box 350166, Brooklyn, NY 11235-0003 (718) 934-4500 sales@minicircuits.com
Page 5 of 5