MTKH310CV

MTKH Series –SMD TCXO Industry Standard Package Wide Frequency Range HCMOS, LVDS, or LVPECL Output RoHS Compliant Available ELECTRICAL SPECIFICATIONS: Frequency Range Frequency Stability Operating Temp.Range Storage Temp. Range Aging Logic “0” Logic “1” Supply Voltage (Vdd) +2.5VDC ± 5% Supply Current +3.3VDC ± 5% Symmetry (50% of waveform) Rise / Fall Time (20% to 80%) Load Start Time Tri-State Operation Control Voltage (Vc) Option +2.5VDC +3.3VDC HCMOS 10.000MHZ to 200.000MHZ LVDS LVPECL 75.000MHZ to 1.000GHZ (See Part Number Guide for Options) (See Part Number Guide for Options) -55°C to +125°C ±5 ppm / yr max 10% of Vdd max 1.43V typ Vdd – 1.620 VDC max 90% of Vdd min 1.10V typ Vdd- 1.025 vdc min 65mA max 50 mA max 50 mA max 65mA max 60 mA max 60 mA max (See Part Number Guide for Options) 2nSec max < 100.000MHZ / 1.5nSec ≥ 100.000MHZ 50 Ohms into 100Ω 10kΩ // 15pF Vdd-2.00 VDC 10mSec max Voh = 70% of Vdd min or No Connection to Enable Output Vol = 30% max or grounded to Disable Output (High Impedance) ±10 ppm with Vc = +1.25VDC ±1.00VDC, Positive Slope ±10 ppm with Vc = +1.65VDC ±1.50VDC, Positive Slope PART NUMBER GUIDE: MTK Frequency Frequency Stability 10 = ±1.0 ppm 15 = ±1.5 ppm 20 = ±2.0 ppm 25 = ±2.5 ppm 30 = ±3.0 ppm 50 = ±5.0 ppm Operating Temperature A = 0°C to + 50°C C = -20°C to +70°C D = -30°C to +70°C E = -30°C to +80°C F = -40°C to +85°C G = 0°C to +70°C Frequency Adjust Option Blank = No connection V = Voltage Control M = Mechanial Trimmer Output H =HCMOS L = LVPECL V = LVDS RoHS Compliant Blank = Not Compliant F = is Compliant Supply Voltage 2 = +2.5 VDC 3 = +3.3 VDC Please Consult with MMD Sales Department for any other Parameters or Options MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTKH012308A FREQUENCY STABILITY vs TEMPERATURE TABLE: Code A G C D E F Stability Temp 0°C TO +50°C 0°C TO +70°C -20°C TO +70°C -30°C TO +70°C -30°C TO +80°C -40°C TO +85°C ● = Available 15 ±1.5ppm ● 20 ±2.0ppm ● ● ● ● ● 25 30 50 ±2.5ppm ±3.0ppm ±5.0ppm ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● = Consult with the Manufacturer MECHANICAL DIMENSIONS: 10.16 [.400] 7.11 [.280] 6.35 [.250] 3 2 1 1.02 [.040] 1.27 [.050] 6.10 [.240] TRIMMER ACCESS OPTION DIMENSION IN BRACKETS ARE IN INCHES TOLERANCE: ±0.25 [.010] RECOMMENDED LAND PATTERN EXTERNAL BYPASS CAPACITOR IS RECOMMENDED UNIT IS NOT HERMETICALLY SEALED 14.73 [.580] 4 5 6 Pin 1 5.08 [.200] 5.08 [.200] Pin Pin Pin Pin Pin 2 3 4 5 6 2.54 [.100] 2.54 [.100] Pin Connections No Connection or Voltage Control Enable / Disable Case Ground Output Comp Output Suppy Voltage (Vcc) ENVIRONMENT / MECHANICAL: Shock Solderability Solvent Resistance Vibration MIL-STD-883, Method 2002, Condition B MIL-STD-883, Method 2003 MIL-STD-883, Method 215 MIL-STD-883, Method 2007, Condition A MARKING DETAIL: Line 1 = MXXXXX M = XXXXX = MMD COMPONENTS Frequency in MHZ MXXXXX SYYWWL XXXXX 1.52 [.060] MXXXXX SYYWWL XXXXX Line 2 = SYYMML S = Internal Code YYMM = 4 Digit Date Code (Year / Month) L = Denotes RoHS Compliant Line 3 = XXXXX Internal use only May vary with lots Black dot to denote Pin 1 MMD Components, 30400 Esperanza, Rancho Santa Margarita, CA, 92688 Phone: (949) 709-5075, Fax: (949) 709-3536, www.mmdcomp.com Sales@mmdcomp.com Specifications subject to change without notice Revision MTKH012308A