171857-4002

04 05 06 07 08 D 09 10 11 12 2.54±0.05 .100±.002 5.08±0.10 .200±.004 7.62±0.15 .300±.006 10.16±0.15 .400±.006 12.70±0.18 .500±.007 15.24±0.18 .600±.007 17.78±0.20 .700±.008 20.32±0.20 .800±.008 22.86±0.23 .900±.009 25.40±0.23 1.000±.009 27.94±0.25 1.100±.010 B A NONE 6.35 .250 NONE NONE 9 E NONE ⌀ 1.14±0.05 HOLE TYP .045±.002 4, 5 PCB LAYOUT: COMPONENT SIDE 4, 5 A REF 4, 5 B 4, 5 4, 5 2.54 .100 TYP AT DATUM -D- 1.19 .047 TYP 4, 5 8, 9 4, 5 8, 9 RELEASE DATE 8 SLOTS LOCATED BETWEEN CIRCUITS (SEE CHART) D 1.07 TYP AT DATUM -D.042 1.3 CENTERLINE OF PIN IN AREA SHOWN NOT .05 TO VARY FROM CENTERLINE OF PIN AT DATUM -DBY MORE THAN 0.20/.008 IN ANY DIRECTION. G GOLD ±0.38 M ±.015 8.18 .322 -D- NOTES: 1. MATERIAL: HOUSING: NYLON, UL 94V-1, COLOR: BLACK PINS: BRASS 2. FINISH: (197) = OVERALL REFLOWED MATTE TIN: 0.00152/.000060 MIN OVER 0.00127/.000050 MIN NICKEL. (208) = SELECT GOLD: 0.00038/.000015 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. (228) = SELECT GOLD: 0.00076/.000030 MIN, SELECT MATTE TIN: 0.00254/.000100 MIN, BOTH OVER 0.00127/.000050 MIN NICKEL. 3. PRODUCT SPECIFICATION AND PROCESS PARAMETERS: PS-171856-0001, PS-171856-0002 4. PACKAGING INFORMATION: SEE CHART. 5. MATES WITH 4455, 2695, 6471 SERIES 6. PARTS ARE STACKABLE END TO END ON 2.54/.100 CENTERS. 7. CIRCUIT ONE DESIGNATION IS USED TO DEFINE VOID LOCATION. CIRCUIT ONE MAY OR MAY NOT LINE UP WITH CIRCUIT ONE ON THE MATING HOUSING. 8. PIN PUSHOUT FORCE: 2 LBS MIN. 9. THIS PART CONFORMS TO CLASS B REQUIREMENTS OF COSMETIC SPECIFICATION PS-45499-002. 10. THE PARTS LISTED ON THIS DRAWING ARE CONSTRUCTED TO MEET THE REQUIREMENT FOR DIRECT SUPPORT OF UNINSULATED LIVE PARTS AS DESCRIBED IN UL508C. FORMAT: Eng-lega-master-tb-prod-B REVISION: C DATE: 2016/04/04 1 2.54±0.05 .100±.002 3.25 .128 AT DATUM -D- 7 3.18 .125 RECESSED GATE MAY BE PRESENT ON 2-12 CIRCUIT PARTS. LOCATION VARIES. CIRCUIT #1 REF, SEE NOTE 7 RELEASE STATUS 2 ±0.05 ±.002 OPTIONAL VOIDED CIRCUIT SEE CHART FOR LOCATION C 3 B C 3.05±0.30 .120±.012 CENTERLINE OF PIN IN AREA SHOWN NOT TO VARY FROM CENTERLINE OF 1.3 .05 PIN AT DATUM -E- BY MORE THAN *** IN ANY DIRECTION. 3.10 .122 REF T TIN DIMENSION P UNDER (3.58)/.141 = (0.13)/.005 DIMENSION P OVER (3.61)/.142 = (0.30)/.012 GROOVE MAY BE PRESENT 0N 2-6 CIRCUIT PARTS (BOTH SIDES). GEOMETRY IS TOOL DEPENDENT AND MAY BE SLIGHTLY DIFFERENT THAN SHOWN. P TYP REF -E- B QUALITY THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION DIMENSION UNITS SCALE SYMBOLS = ALTERNATE ENGRAVING LOCATION (7-12 CKT PARTS ONLY). LOCATION IS DEPENDENT ON TOOLING. C 6 5 0 = 0 = 0 = 0 = 0 = 0 = 0 = 0 B1 REV 03 4.93 .194 7.47 .294 10.01 .394 12.55 .494 15.09 .594 17.63 .694 20.17 .794 22.71 .894 25.25 .994 27.79 1.094 30.33 1.194 SLOTS LOCATION 2016/11/23 2017/04/11 2017/04/28 E B 4 ADD VIEW, NOTE 10 02 A 5 6 111298 MKIPPER MKIPPER FSMITH CKT 7 8 EC NO: DRWN: CHK'D: APPR: 9 GENERAL TOLERANCES (UNLESS SPECIFIED) INCH MM MM/IN DRWN BY 4 PLACES ± ± MKIPPER 3 PLACES ± ± 0.01 CHK'D BY 2 PLACES ± 0.25 ± 0.015 SSOUSEK 1 PLACES ± 0.38 ± APPR BY 0 PLACES ± ± ANGULAR TOL ± 0.5 DRAFT WHERE APPLICABLE MUST REMAIN WITHIN DIMENSIONS 4 2012/12/05 KK RPC .100 RIGHT ANGLE HEADER ASSEMBLY FRICTION LOCK DATE 2012/12/12 DATE 2013/06/11 FSMITH DRAWING SIZE B 4:1 DATE THIRD ANGLE PROJECTION PRODUCT CUSTOMER DRAWING MATERIAL NUMBER SERIES 171857 SEE CHART DOCUMENT NUMBER 3 CUSTOMER SD-171857-0001 2 GENERAL MARKET DOC TYPE DOC PART SHEET NUMBER PSD 000 1 1 OF * A GROUP: 171857-0002/-0012 PLATING: 197 MATING: (M) 6.73 / .265 DIM. G: N/A PC TAIL: (P) 2.54 / .100 DIM T: OVERALL PACKAGING: PK-7478-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-0002 3 171857-0003 4 171857-0004 5 171857-0005 6 171857-0006 7 171857-0007 8 171857-0008 9 171857-0009 10 171857-0010 11 171857-0011 12 171857-0012 REV: A3 GROUP: 171857-1002/-1012 PLATING: 208 MATING: (M) 6.73 / .265 DIM. G: 5.08 / .200 PC TAIL: (P) 2.54 / .100 DIM T: 3.43 / .135 PACKAGING: PK-7478-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-1002 3 171857-1003 4 171857-1004 5 171857-1005 6 171857-1006 7 171857-1007 8 171857-1008 9 171857-1009 10 171857-1010 11 171857-1011 12 171857-1012 ECR/ECN INFORMATION: EC No.: DATE: UCP2015-1230 10/23/2017 TITLE: GROUP: 171857-2002/-2012 PLATING: 228 MATING: (M) 6.73 / .265 DIM. G: 5.08 / .200 PC TAIL: (P) 2.54 / .100 DIM T: 3.43 / .135 PACKAGING: PK-7478-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-2002 3 171857-2003 4 171857-2004 5 171857-2005 6 171857-2006 7 171857-2007 8 171857-2008 9 171857-2009 10 171857-2010 11 171857-2011 12 171857-2012 SHEET No. KK RPC 100 RIGHT ANGLE HEADER ASSEMBLY, FRICTION LOCK DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171857 - 0001 MKIPPER NNGUYEN -2APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC GROUP: 171857-0102/-0112 PLATING: 197 MATING: (M) 6.71 / .264 DIM. G: N/A PC TAIL: (P) 3.58 / .141 DIM T: OVERALL PACKAGING: PK-7478-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-0102 3 171857-0103 4 171857-0104 5 171857-0105 6 171857-0106 7 171857-0107 8 171857-0108 9 171857-0109 10 171857-0110 11 171857-0111 12 171857-0112 REV: A3 GROUP: 171857-1102/-1112 PLATING: 208 MATING: (M) 6.71 / .264 DIM. G: 4.57 / .180 PC TAIL: (P) 3.58 / .141 DIM T: 3.43 / .135 PACKAGING: PK-7478-001 BULK MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-1102 3 171857-1103 4 171857-1104 5 171857-1105 6 171857-1106 7 171857-1107 8 171857-1108 9 171857-1109 10 171857-1110 11 171857-1111 12 171857-1112 ECR/ECN INFORMATION: EC No.: DATE: UCP2015-1230 10/23/2017 TITLE: GROUP: PLATING: MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 3 4 5 6 7 8 9 10 11 12 SHEET No. KK RPC 100 RIGHT ANGLE HEADER ASSEMBLY, FRICTION LOCK DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171857 - 0001 MKIPPER NNGUYEN -3APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC GROUP: PLATING: MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171857-3002/-3012 197 6.73 / .265 N/A 2.54 / .100 OVERALL PK-171857-0001 PACKAGING: TAPE AND REEL MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-3002 3 171857-3003 4 171857-3004 5 171857-3005 6 171857-3006 7 171857-3007 8 171857-3008 9 171857-3009 10 171857-3010 11 171857-3011 12 171857-3012 REV: A3 GROUP: PLATING: MATING: (M) DIM. G: PC TAIL: (P) DIM T: 171857-4002/-4012 208 6.73 / .265 5.08 / .200 2.54 / .100 3.43 / .135 PK-171857-0001 PACKAGING: TAPE AND REEL MATERIAL MATERIAL VOID CKTS CKTS NUMBER NUMBER CKT 2 171857-4002 3 171857-4003 4 171857-4004 5 171857-4005 6 171857-4006 7 171857-4007 8 171857-4008 9 171857-4009 10 171857-4010 11 171857-4011 12 171857-4012 ECR/ECN INFORMATION: EC No.: DATE: UCP2015-1230 10/23/2017 TITLE: GROUP: PLATING: MATING: (M) DIM. G: PC TAIL: (P) DIM T: PACKAGING: CKTS MATERIAL MATERIAL CKTS NUMBER NUMBER VOID CKT 2 3 4 5 6 7 8 9 10 11 12 SHEET No. KK RPC 100 RIGHT ANGLE HEADER ASSEMBLY, FRICTION LOCK DOCUMENT NUMBER: CREATED / REVISED BY: CHECKED BY: SD - 171857 - 0001 MKIPPER NNGUYEN -4APPROVED BY: FSMITH TEMPLATE FILENAME: PRODUCT_SPEC[SIZE_A](V.1).DOC