C85E.pdf
Sep.14,2018
Lead Type Disc Ceramic Capacitors (Safety Standard Certified)
Resin Molding SMD Type Ceramic Capacitors (Safety Standard Certified)
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
• All the products in this catalog comply
with EU RoHS.
• EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
• For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
C85E.pdf
Sep.14,2018
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
1
Contents
Product specifications are as of August 2018.
Part Numbering
p2
2
Safety Standard Certified Resin Molding SMD Type Ceramic Capacitors for General Purpose
1 Type EA (Reinforced Insulation) -Class X1, Y1- (Recommend)
p5
p7
p9
p10
p11
p14
3
2 Type SA: AC400V (Basic Insulation) -Class X1, Y2- (Recommend)
p15
4
3 Type RA: AC500V (Reinforced Insulation) -Class X1, Y1- (Recommend)
p17
p19
Type EA Specifications and Test Methods
Type EA Complemant of Test Methods
Type EA Packing
Type EA !Caution
Type EA Notice
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type SA: AC400V / RA: AC500V Specifications and Test Methods
4 Type SA: AC250V or AC300V (Basic Insulation) -Class X1, Y2- (Recommend)
p23
5 Type RA: AC250V or AC300V (Reinforced Insulation) -Class X1, Y1- (Recommend)
p26
p29
Type SA: AC250V or AC300V / RA: AC250V or AC300V Specifications and Test Methods
6 Type RB (Reinforced Insulation) -Class X1, Y1- (Recommend)
Type RB: X1: AC760V Specifications and Test Methods
p33
p35
7 Type KY (Basic Insulation) -Class X1, Y2-
p39
8 Type KX New Small Size (Reinforced Insulation) -Class X1, Y1-
p42
p45
Type KY/KX Specifications and Test Methods
Characteristics Data (Typical Example)
Packaging
!Caution
Notice
5
p49
p53
p55
p58
6
7
Safety Standard Certified Lead Type Disc Ceramic Capacitors for Automotive
9 Type KJ -Class X1, Y2- (For Automotive Use/AC Line Filter of PHEV/EV Charger)
Type KJ Specifications and Test Methods
p59
p60
Characteristics Data (Typical Example)
Packaging
!Caution
Notice
p64
p65
p66
p69
Lead Type Disc Ceramic Capacitors (Safety Certified)/
Resin Molding SMD Type Ceramic Capacitors (Safety Certified) ISO9000 Certifications
p70
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
8
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Safety Standard Certified Resin Molding SMD Type Ceramic Capacitors for General Purpose
(Part Number)
DK
1
E3
EA 102 M 86
R
AH01
1
2
3
4
8
9
5
6
7
1Product ID 2Series Category
6Capacitance Tolerance
Product
ID
Code
Outline
Contents
DK
1
Safety Standard
Certified
IEC60384-14 ClassX1, Y1
Code
Capacitance Tolerance
K
±10%
M
±20%
7Case Size
3Temperature Characteristics
Code
Temperature
Characteristics
Cap. Change
or Temp. Coeff.
B3
B
±10%
E3
E
1X
SL
+20%, -55%
Temperature
Range
Dimensions
86
8.0 x 6.0mm
8Packaging
-25 to +85°C
+350 to -1000ppm/°C +20 to +85°C
4Rated Voltage/Safety Standard Certified Type
Code
Rated Voltage
EA
X1: AC440V (r.m.s.), Y1: AC250V (r.m.s.)
or X1: AC440V (r.m.s.), Y1: AC300V (r.m.s.)
(Safety Standard Certified Type EA)
5Capacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
2
Code
Code
Packaging
R
ø330mm Embossed Taping
9Individual Specification Code
Expressed by four figures.
C85E.pdf
Sep.14,2018
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
(Part Number)
2
E3
KY 102 M N3
A
1
2
3
4
8 9 :
5
6
7
1Product ID 2Series Category
Product
ID
Code
1
DE
2
F
DE
6Capacitance Tolerance
Outline
Contents
Safety Standard
Certified
Code
±5%
IEC60384-14 Class X1, Y1
K
±10%
IEC60384-14 Class X1, Y2
M
±20%
For Electrical Appliance and Material Safety Law of Japan, the first
three digits (1Product ID and 2Series Category) express "Series
Name."
For Safety Certified Capacitors, the first three digits express product
code. The fourth figure expresses certified type shown in 4Safety
Standard Certified Type column.
7Lead Style
Dimensions (mm)
Code
Lead Style
A2
3Temperature Characteristics
Code
Temperature
Characteristics
Capacitance Tolerance
J
B3
B
±10%
E3
E
+20%, -55%
F3
F
+30%, -80%
1X
SL
Temperature
Range
A4
+350 to -1000ppm/°C +20 to +85°C
Pitch of
Components
7.5
ø0.6±0.05
—
ø0.6±0.05
—
10
B2/J2
B3/J3
-25 to +85°C
Lead
Diameter
5
Vertical Crimp
Long
A3
Cap. Change
or Temp. Coeff.
Lead
Spacing
B4/J4
N2
5
Vertical Crimp
Short
10
Vertical Crimp
Taping
N3
7.5
N4
5
7.5
12.7
ø0.6±0.05
10
15
25.4
4Rated Voltage/Safety Standard Certified Type
Code
Rated Voltage
RA
X1: AC440V (r.m.s.), Y1: AC250V (r.m.s.)
or X1: AC440V (r.m.s.), Y1: AC300V (r.m.s.)
or X1: AC500V (r.m.s.), Y1: AC500V (r.m.s.)
(Safety Standard Certified Type RA)
8Packaging
Code
Packaging
A
Ammo Pack Taping
B
Bulk
RB
X1: AC760V (r.m.s.), Y1: AC500V (r.m.s.)
(Safety Standard Certified Type RB)
KX
X1: AC440V (r.m.s.), Y1: AC250V (r.m.s.)
or X1: AC440V (r.m.s.), Y1: AC300V (r.m.s.)
(Safety Standard Certified Type KX)
For part number that cannot be identified without "Individual
Specification," it is added at the end of part number, expressed by
three-digit alphanumerics.
SA
X1: AC300V (r.m.s.), Y2: AC250V (r.m.s.)
or X1: AC300V (r.m.s.), Y2: AC300V (r.m.s.)
or X1: AC440V (r.m.s.), Y2: AC400V (r.m.s.)
(Safety Standard Certified Type SA)
:Halogen-free Compatible Product
KY
X1: AC250V (r.m.s.), Y2: AC250V (r.m.s.)
or X1: AC250V (r.m.s.), Y2: AC300V (r.m.s.)
(Safety Standard Certified Type KY)
9Individual Specification Code
5Capacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
3
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for Automotive
(Part Number)
DE
6
E3
KJ 102 M N3
A
1
2
3
4
8 9
5
6
7
7Lead Style
1Product ID 2Series Category
Product
ID
Code
DE
6
Outline
Contents
Safety Standard
Certified
3Temperature Characteristics
Temperature
Cap. Change Temperature
Characteristics or Temp. Coeff.
Range
B3
B
±10%
A3
Vertical Crimp
Long
B3
Vertical Crimp
Short
N3
Vertical Crimp
Taping
Lead
Spacing
Lead
Diameter
Pitch of
Components
E3
E
+20%, -55%
—
7.5
ø0.6±0.05
—
15
8Packaging
-25 to +85°C
4Rated Voltage/Safety Standard Certified Type
Code
Rated Voltage
KJ
X1: AC440V (r.m.s.), Y2: AC300V (r.m.s.)
(Safety Standard Certified Type KJ)
5Capacitance
Expressed by three figures. The unit is pico-farad (pF). The first
and second figures are significant digits, and the third figure
expresses the number of zeros that follow the two numbers.
6Capacitance Tolerance
4
Lead Style
IEC60384-14 Class X1, Y2
The first three digits express product code. The fourth figure expresses
certified type shown in 4Safety Standard Certified Type column.
Code
Dimensions (mm)
Code
Code
Capacitance Tolerance
K
±10%
M
±20%
Code
Packaging
A
Ammo Pack Taping
B
Bulk
9Individual Specification Code
For part number that cannot be identified without "Individual
Specification," it is added at the end of part number, expressed by
three-digit alphanumerics.
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Resin Molding SMD Type Ceramic Capacitors for General Purpose
1
2.5±0.3
Type EA (Reinforced Insulation) -Class X1, Y1 SMD Type- (Recommend)
Features
1. Small size and low height SMD
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength: AC4000V
4. Class X1/Y1 capacitors certified by ENEC (SEMKO)/UL/
CQC/KTC
5. Can be use with a component in appliances requiring
reinforced insulation and double insulation based on
UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
7. Rated voltage: X1: AC440V(r.m.s.), Y1: AC250V(r.m.s.) or
X1: AC440V(r.m.s.), Y1: AC300V(r.m.s.)
W
8.0±0.5
L
T
0.75±0.3
(*10)
(in mm)
L: 11.4±0.5, W: 6.0±0.5, T: 2.5 max.
The value marked with * is a reference.
Applications
Ideal for use as Y capacitors and primary-secondary
coupling on the reduction in the size and thickness of
power supply equipment.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification Rated Voltage (250Vac)
Standard No.
ENEC
(SEMKO)
UL
CQC
KTC
Certified No.
EN 60384-14
SE/16008-1
UL 60384-14
IEC 60384-14
KC 60384-14
E37921
CQC16001142384
HU03008-16007
Marking Rated Voltage (250Vac)
Rated Voltage
Item
Example
1 Type Designation EA
250Vac(r.m.s.)
2 Nominal Capacitance
①
②
EA 102
X1 440~
Y1 250~
15 5N
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
③
④
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Company Name Code
15 : Made in Thailand
4 Manufactured Date Code
KTC Approval Mark
Class Code
X1Y1
Rated Voltage Mark
440~, 250~
Continued on the following page.
5
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Standard Certification Rated Voltage (300Vac)
Standard No.
1
ENEC
(SEMKO)
UL
CQC
Certified No.
EN 60384-14
SE/16008-1
UL 60384-14
IEC 60384-14
E37921
CQC16001142384
Marking Rated Voltage (300Vac)
Rated Voltage
Item
Example
1 Type Designation EA
300Vac(r.m.s.)
①
EA 102
X1 440~
Y1 300~
15 5N
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
③
④
② 2 Nominal Capacitance
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Company Name Code
15 : Made in Thailand
4 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
440~, 300~
Rated Voltage 250Vac
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Dimension L
Dimension W
Body
Thickness T
DK11XEA100K86RAH01
250Vac(r.m.s.)
SL
10pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK11XEA220K86RAH01
250Vac(r.m.s.)
SL
22pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK11XEA470K86RAH01
250Vac(r.m.s.)
SL
47pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA101K86RAH01
250Vac(r.m.s.)
B
100pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA221K86RAH01
250Vac(r.m.s.)
B
220pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA331K86RAH01
250Vac(r.m.s.)
B
330pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA471K86RAH01
250Vac(r.m.s.)
B
470pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA681K86RAH01
250Vac(r.m.s.)
B
680pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1E3EA102M86RAH01
250Vac(r.m.s.)
E
1000pF±20%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1E3EA152M86RAH01
250Vac(r.m.s.)
E
1500pF±20%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
Murata part numbers might be changed. Therefore, please specify only the type name (EA) and capacitance of products in the part list when it is required for
applying safety standard of electric equipments.
Rated Voltage 300Vac
AC Rated
Voltage
Temp.
Char.
Capacitance
Dimension L
Dimension W
Body
Thickness T
DK11XEA100K86RBH01
300Vac(r.m.s.)
SL
10pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK11XEA220K86RBH01
300Vac(r.m.s.)
SL
22pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK11XEA470K86RBH01
300Vac(r.m.s.)
SL
47pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA101K86RBH01
300Vac(r.m.s.)
B
100pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA221K86RBH01
300Vac(r.m.s.)
B
220pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA331K86RBH01
300Vac(r.m.s.)
B
330pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA471K86RBH01
300Vac(r.m.s.)
B
470pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1B3EA681K86RBH01
300Vac(r.m.s.)
B
680pF±10%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1E3EA102M86RBH01
300Vac(r.m.s.)
E
1000pF±20%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
DK1E3EA152M86RBH01
300Vac(r.m.s.)
E
1500pF±20%
11.4±0.5mm
6.0±0.5mm
2.5mm max.
Part Number
Murata part numbers might be changed. Therefore, please specify only the type name (EA) and capacitance of products in the part list when it is required for
applying safety standard of electric equipments.
6
Continued on the following page.
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type EA Specifications and Test Methods
1
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
1
Appearance
No defects or abnormalities
Visual Inspection.
2
Dimensions
Within specified dimension
Using calipers and micrometers.
3
Dielectric Strength
No defects or abnormalities
The capacitor shall not be damage when AC4000V(r.m.s.) is
applied between the terminations for 60s.
4
Insulation Resistance (I.R.)
6000MΩ or more
The insulation resistance shall be measured with DC500±50V
within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
5
Capacitance
Within the specified tolerance
6
Dissipation Factor (D.F.)
0.025 max.
Capacitance Temperature
Characteristics
Temp. Coefficient
SL: +350 to -1000 ppm/°C
(Temp. Range: +20 to +85°C)
Cap. Change
B5'2&',{z
B5'2&',|zGQ
(Temp. Range: -25 to +85°C)
The capacitance measurement shall be made at each step in
table.
F0#20# 2+#,2$-0A !& 0@
Perform the heat treatment at 150+0/-10°C for 60±5min
and then let sit for 24±2h at room condition*.
Appearance
No marked defect
Capacitance
Within the specified tolerance
D.F.
Pass the item No.6
Solder the capacitor to the Test Jig a (glass epoxy board)
shown in "Complement of test method".
The capacitor shall be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz.
The frequency range, from 10 to 55Hz and return to 10Hz, shall
be traversed in approximately 1min.
This motion shall be applied for a period of 2h in each of 3
mutually perpendicular directions (total of 6h).
7
8
9
Vibration
Resistance
Solderability of Termination
Soldering
10 Effect
(Reflow)
11
75% of the terminations are to be
soldered.
Appearance
No marked defects
Capacitance
Within ±10%
I.R.
1000MΩ or more
Dielectric
Strength
Pass the item No.3
Adhesive strength of
Termination
Capacitance/D.F. shall be measured at 20°C with the
frequency of 1±0.2kHz and a voltage of AC1±0.2V(r.m.s.).
Step
Temp. (°C)
1
20±2
2
-25±2
3
20±2
4
85±2
5
20±2
Immerse the capacitor in the solution of ethanol (JIS K 8101)
and rosin (JIS K 5902) (25% rosin in weight proportion).
Immerse in solder solution for 2±0.5s.
Temp. of solder: 245±5°C
Preheat the capacitor at 150 to 180°C for 90±30s.
Reflow temp.: 230°C min. (max. temp.: 260°C)
Reflow time: 30±10s.
Reflow number of times: 4 times
Let sit at room condition* for 24±2h, then measure.
F&#,#620#$*-5.-0!#111&-3*" #"-,# $2#02#+.#0 230#
of the sample has dropped to room temperature.
F0#20# 2+#,2$-0A !& 0@
Capacitor should be stored at 150+0/-10°C for 1h, and apply
the AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h before initial measurements.
Solder the capacitor to the Test Jig a (glass epoxy board)
shown in "Complement of test method".
Then apply 10N force in the direction of the arrow.
No removal of the terminations or other
defects should occur.
10N, 10±1s
* 11 .-67- 0"
12
Temperature
Cycle
Appearance
No marked defect
Capacitance
Change
Within ±15%
D.F.
SL: 0.025 max.
A B0.05 max.
I.R.
3000MΩ or more
Dielectric Strength
Pass the item No.3
Fix the capacitor to the supporting Test Jig A (glass epoxy
board) shown in "Complement of test method".
Perform the 5 cycles according to the 4 heat treatments listed
the following table.
Step
1
2
3
4
Temp. (°C)
-40±3
Room Temp.
125±3
Room Temp.
Time (min.)
30±3
2 to 3
30±3
2 to 3
Let sit for 24±2h, at room condition*, then measure.
F0#20# 2+#,2$-0A !& 0@
Capacitor should be stored at 150+0/-10°C for 1h, and apply
the AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
7
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type EA Specifications and Test Methods
1
Continued from the preceding page.
No.
13
14
Item
Humidity
(Steady state)
Humidity
Loading
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±20%
D.F.
SL: 0.025 max.
B, E: 0.05 max.
I.R.
3000MΩ or more
Dielectric Strength
Pass the item No.3
Appearance
No marked defect
Capacitance
Change
Within ±20%
D.F.
SL: 0.025 max.
B, E: 0.05 max.
I.R.
3000MΩ or more
Dielectric Strength
Pass the item No.3
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ or more
Test Method
Sit the capacitor at 40±2°C and relative humidity 90 to 95%
for 500+24/-0h. Remove and let sit for 24±2h at room
condition*, then measure.
F0#20# 2+#,2$-0A !& 0@
Capacitor should be stored at 150+0/-10°C for 1h, and apply
the AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements.
Apply the rated voltage at 40±2°C and relative humidity 90 to
95% for 500+24/-0h. Remove and let sit for 24±2h at room
condition*, then measure.
F0#20# 2+#,2$-0, E char.
Capacitor should be stored at 150+0/-10°C for 1h, and apply
the AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements.
Impulse Voltage test is performed.
Each individual capacitor shall be subjected to a 8kV impulse
(the voltage value means zero to peak) for 3 times. Then the
capacitors are applied to life test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
T2
15 Life
Apply voltage as Table for 1000h at 125+2/-0°C,
relative humidity 50% max.
Dielectric Strength
Pass the item No.3
Applied Voltage
AC550V(r.m.s.), except that once each hour the voltage
is increased to AC1000V(r.m.s.) for 0.1s.
Remove and let sit for 24±2h at room condition*, then
measure.
F0#20# 2+#,2$-0A !& 0@
Capacitor should be stored at 150+0/-10°C for 1h, and apply
the AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements.
16 Passive Flammability
The burning time should not exceeded
the time 30s.
The tissue paper should not ignite.
The capacitor under test shall be held in the flame in the
position which best promotes burning. Each specimen shall
only be exposed once to the flame.
Time of exposure to flame: 30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Test Specimen
burner
flame
45°
200±5mm
Approximately 8mm
Tissue Paper
Wood board of approximately 10mm in thickness
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
8
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type EA Specifications and Test Methods
1
Continued from the preceding page.
No.
Item
Specifications
Test Method
The capacitor shall be individually wrapped in at least one but
more than two complete layers of cheesecloth. The
capacitor shall be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC shall be
maintained for 2min after the last discharge.
F
S{
Tr
S2
C{
UAC
L{
C2
L3
R
L2
C3
Cx
Ct
Ut
L~
Oscilloscope
17 Active Flammability
The cheesecloth should not be on fire.
C{A| B{£
{z
3
Bz@z}}£
{z)
L{2-~B{@+ |z{-"!-0#!&-)#
: 3£
{z)4
R
B{zzΩ|
Ct
: Capacitor specimens
UAC
: UR
Cx
: Rated Voltage
F
:
31#A0 2#"{
UR
: Voltage impressed on the tank capacitor Ct
Ut
Ux
5kV
time
Complement of Test Method
Test Jig
The test jig should be Jig A as described in “Specifications and Test Methods”.
The specimen should be soldered by the conditions as described below.
Soldering Method: Reflow soldering
Solder: Sn-3.0Ag-0.5Cu
{@z
{@~
8.0
@~
2.2
2.0
@~
@~
}@
0.5
Test Jig A
Solder resist
Copper foil
(in mm)
Test Jig
F 2#0' *B * 11 .-67- 0"
F&'!),#11B{@++
F&'!),#11-$!-..#0$-'*Bz@z}++
9
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type EA Packing
1
Packing
1. Dimension of Tape
4.0+/-0.1
ø 1.5+0.1/-0
1.75+/-0.1
2.0+/-0.1
B
A
24+/-0.3
0.4+/-0.1
11.5+/-0.1
8.0+/-0.1
4.0 max.
A×B＝12.0×7.0 (typ.)
(in mm)
2. Dimension of Reel
29.4±1.0
80±1.0
2.0±0.5
330±2.0
ø 21.0±0.8
ø 13.0±0.2
25.4±1.0
(in mm)
(1) Part of the leader and part of the empty tape shall be attached to the end of the tape as follows.
Vacant section: 160 min.
Capacitor mounting unit
Direction of feed
Vacant section
190 min.
210 min.
(in mm)
(2) The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of 2 pitches.
(3) Missing capacitors number within 0.1% of the number per reel or 1pc, whichever is greater, and not continuous.
(4) The top tape or cover tape and bottom tape shall not protrude beyond the edges of the tape and shall not cover sprocket holes.
(5) Cumulative tolerance of sprocket holes, 10 pitches: ±0.3mm.
(6) Peeling off force: 0.1 to 0.6N in the direction shown on the follows.
165 to 180°
Top Tape or Cover Tape
Base Tape
Minimum Quantity (Order in Sets Only)
[Taping]
(pcs./Ammo Pack)
Packing Qty
Type EA
10
2,500
C85E.pdf
Sep.14,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type EA !Caution
1
!Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmospheric temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's
characteristics and reliability. (Never attempt to perform
measurement with the cooling fan running. Otherwise,
accurate measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
11
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Type EA !Caution
1
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, the capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, test
voltage should be applied with the zero cross.* At the
end of the test time, the test voltage should be reduced
to near zero, and then capacitor's lead or terminal should
be taken off the output of the withstanding voltage test
equipment.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, the surge
voltage may rise, and therefore, a defect may be caused.
*ZERO CROSS is the point where voltage sine wave
passes 0V. See the figure at right.
4. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
12
Voltage sine wave
0V
zero cross
C85E.pdf
Sep.14,2018
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type EA !Caution
1
!Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulation coating of capacitors does not form a perfect
seal; therefore, do not use or store capacitors in a corrosive
atmosphere, especially where chloride gas, sulfide gas, acid,
alkali, salt or the like are present. And avoid exposure to
moisture. Before cleaning, bonding, or molding this product,
verify that these processes do not affect product quality
by testing the performance of a cleaned, bonded or molded
product in the intended equipment.
This one is MSL 3 product. So, in order to avoid the
absorption of moisture, capacitors are packed in moistureproof envelope.
Store the capacitors in the following conditions at all times,
and use within 6 months after delivered.
Temperature: 10 to 30°C.
Humidity: 60% max.
Solder the enclosed capacitors within 168 hours after
opening the moisture-proof package.
After opening, store the capacitors in moisture-proof
package with a desiccant and HIC card and keep the
described condition.
In case the storage period has been exceeded 6 months
or the indicator color of a enclosed HIC card has changed
when the package has been opened, perform baking
(60°C x 168h) before soldering.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
!Caution (Soldering and Mounting)
1. VIBRATION AND IMPACT
Do not expose a capacitor or its leads to excessive shock
or vibration during use.
2. SOLDERING
(1) Reflow Soldering
When soldering capacitor, it should be performed in
following conditions.
Soldering temperature: 230 to 260°C
Soldering time: 10 to 30s.
Preheating temperature: 170°C max.
(2) Flow Soldering
When soldering capacitor, it should be performed in
following conditions.
Soldering temperature: 260°C max.
Soldering time: 5s max.
Preheating temperature: 120°C max.
Preheating time: 60s max.
(3) Soldering Iron
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specification of the
capacitor. Subjecting this product to excessive heating
could melt the internal junction solder and may result
in thermal shocks that can crack the ceramic element.
When soldering capacitor with a soldering iron, it should
be performed in following conditions.
Temperature of iron-tip: 400°C max.
Soldering iron wattage: 50W max.
Soldering time: 3.5s max.
3. BONDING, RESIN MOLDING AND COATING
Before bonding, molding or coating this product, verify
that these processes do not affect the quality of capacitor
Standard Conditions for Reflow Soldering
Temperature
(°C)
Soldering
260°C
°C
230°C
°C
170°C
°C
150°C
°C
130°C
°C
Gradual
Cooling
Preheating
Time
60 - 120 s
10 - 30 s
by testing the performance of the bonded, molded or
coated product in the intended equipment.
In case of the amount of applications, dryness / hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc.) are unsuitable, the outer coating resin of a
capacitor is damaged by the organic solvents and it may
result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin or
coating may cause a outer coating resin cracking and/or
ceramic element cracking of a capacitor in a temperature
cycling.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
13
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type EA !Caution/Notice
1
!Caution (Handling)
VIBRATION AND IMPACT
Do not expose a capacitor or its leads to excessive shock or
vibration during use.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
Notice (Soldering and Mounting)
CLEANING (ULTRASONIC CLEANING)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the terminals.
Notice (Rating)
1. CAPACITANCE CHANGE OF CAPACITORS
(1) Class 1 capacitors
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use for the strict time constant
circuit.
(2) Class 2 capacitors
Class 2 capacitors like temperature characteristic B, E
and F have an aging characteristic, whereby the capacitor
continually decreases its capacitance slightly if the
capacitor leaves for a long time.
Moreover, capacitance might change greatly depending
on a surrounding temperature or an applied voltage.
So, it is not likely to be able to use for the time constant
circuit.
Please contact us if you need a detail information.
14
2. PERFORMANCE CHECK BY EQUIPMENT
Before using a capacitor, check that there is no problem in
the equipment's performance and the specifications.
Generally speaking, Class 2 ceramic capacitors have voltage
dependence characteristics and temperature dependence
characteristics in capacitance.
So, the capacitance value may change depending on the
operating condition in a equipment.
Therefore, be sure to confirm the apparatus performance
of receiving influence in a capacitance value change of a
capacitor, such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a capacitor in
the equipment, if needed, because the surge voltage may
exceed specific value by the inductance of the circuit.
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type SA: AC400V (Basic Insulation) -Class X1, Y2- (Recommend)
D max.
Features
3.0 max.
2
e
25.0 min.
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A3)
Lead Code
Coating Extension e
ød
A3
Up to the end of crimp
0.6±0.05
Applications
D max.
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
Standard Certification
Standard No.
ENEC
(VDE)
UL
CQC
e
3.5±1.0
0.5
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
T max.
3.0 max.
1. Impulse voltage guaranteed 8kV0-p.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength: AC2600V
4. Class X1/Y2 capacitors certified by ENEC(VDE)/UL/CQC.
5. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
6. Taping available for automatic insertion.
7. Rated Voltage: X1: AC440V(r.m.s.), Y2: AC400V(r.m.s.)
T max.
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (J3)
Lead Code
Coating Extension e
ød
J3
Up to the end of crimp
0.6±0.05
Marking
Certified No.
EN 60384-14
40042990
UL 60384-14
IEC 60384-14
E37921
CQC15001137840
Rated Voltage
Item
Example
1 Type Designation SA
2
2 Nominal Capacitance
400Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
5
SA103M
X1 440~
Y2 400~
5D
15
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
4
15 : Made in Thailand
5 Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
440~, 400~
15
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Rated Voltage 400Vac
2
Lead
Lead
Lead
Package
Package Package
Long Bulk Short Bulk Taping
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
DE21XSA100KpppY02F
400Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA150KpppY02F
400Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
7.5
6.0mm max.
A3B
J3B
N3A
DE21XSA220KpppY02F
400Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA330KpppY02F
400Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA470KpppY02F
400Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA680KpppY02F
400Vac(r.m.s.)
SL
68pF±10%
9.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA101KpppY02F
400Vac(r.m.s.)
B
100pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA151KpppY02F
400Vac(r.m.s.)
B
150pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA221KpppY02F
400Vac(r.m.s.)
B
220pF±10%
6.0mm max.
7.5
6.0mm max.
A3B
J3B
N3A
DE2B3SA331KpppY02F
400Vac(r.m.s.)
B
330pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA471KpppY02F
400Vac(r.m.s.)
B
470pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA681KpppY02F
400Vac(r.m.s.)
B
680pF±10%
8.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA102MpppY02F
400Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA152MpppY02F
400Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA222MpppY02F
400Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA332MpppY02F
400Vac(r.m.s.)
E
3300pF±20% 12.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA472MpppY02F
400Vac(r.m.s.)
E
4700pF±20% 13.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA103MpppY02F
400Vac(r.m.s.)
E
10000pF±20% 17.0mm max.
7.5
6.0mm max.
A3B
J3B
N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Individual specification code "Y02F" express "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (SA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
16
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type RA: AC500V (Reinforced Insulation) -Class X1, Y1- (Recommend)
D max.
e
25.0 min.
1. Impulse voltage guaranteed 12kV0-p.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength: AC4000V
4. Class X1/Y1 capacitors certified by ENEC(VDE)/UL/CQC.
5. Can be use with a component in appliances requiring
reinforced insulation and double insulation based on
UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
7. Taping available for automatic insertion.
8. Rated Voltage: X1: AC500V(r.m.s.), Y1: AC500V(r.m.s.)
T max.
3.0 max.
Features
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A4)
Lead Code
Coating Extension e
ød
A4
Up to the end of crimp
0.6±0.05
D max.
T max.
3.0 max.
Applications
e
3.5±1.0
0.5
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
3
ød
F±0.8
(in mm)
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification
Standard No.
ENEC
(VDE)
UL
CQC
[Bulk]
Vertical Crimp Short (J4)
Lead Code
Coating Extension e
ød
J4
Up to the end of crimp
0.6±0.05
Marking
Certified No.
EN 60384-14
40043033
UL 60384-14
IEC 60384-14
E37921
CQC16001138225
Rated Voltage
Item
Example
1 Type Designation RA
2
2 Nominal Capacitance
500Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
5
RA 472M
X1 500~
Y1 500~
5D
15
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
4
15 : Made in Thailand
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
500~
17
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Rated Voltage 500Vac
3
Lead
Lead
Lead
Package
Package Package
Long Bulk Short Bulk Taping
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
DE11XRA100KpppQ01F
500Vac(r.m.s.)
SL
10pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA150KpppQ01F
500Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE11XRA220KpppQ01F
500Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA330KpppQ01F
500Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA470KpppQ01F
500Vac(r.m.s.)
SL
47pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA680KpppQ01F
500Vac(r.m.s.)
SL
68pF±10%
9.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA101KpppQ01F
500Vac(r.m.s.)
B
100pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA151KpppQ01F
500Vac(r.m.s.)
B
150pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA221KpppQ01F
500Vac(r.m.s.)
B
220pF±10%
6.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RA331KpppQ01F
500Vac(r.m.s.)
B
330pF±10%
7.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RA471KpppQ01F
500Vac(r.m.s.)
B
470pF±10%
8.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RA681KpppQ01F
500Vac(r.m.s.)
B
680pF±10%
9.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RA102MpppQ01F 500Vac(r.m.s.)
E
1000pF±20%
8.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RA152MpppQ01F 500Vac(r.m.s.)
E
1500pF±20%
9.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RA222MpppQ01F 500Vac(r.m.s.)
E
2200pF±20% 11.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RA332MpppQ01F 500Vac(r.m.s.)
E
3300pF±20% 13.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RA472MpppQ01F 500Vac(r.m.s.)
E
4700pF±20% 14.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (RA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
18
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC400V / RA: AC500V Specifications and Test Methods
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
1
Appearance and Dimensions
No visible defect, and dimensions are within
specified range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
Marking
To be easily legible
The capacitor should be visually inspected.
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
2.5% max.
The capacitance, dissipation factor should be measured at
20˚C with 1±0.1kHz and AC1±0.2V max.
5
Insulation Resistance (I.R.)
10000MΩ min.
The insulation resistance should be measured with
DC500±50V within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60s.
Between Lead
No failure
Wires
6
Dielectric
Strength
Body
Insulation
No failure
Type
SA
RA
Test Voltage
AC2600V(r.m.s.) ‹50/60Hz›
AC4000V(r.m.s.) ‹50/60Hz›
First, the terminals of the capacitor
about
3 to 4mm
should be connected together. Then,
(in case of
as shown in the figure at right, a metal
Type RA:
foil should be closely wrapped around
3 to 6mm)
Metal
the body of the capacitor to the
Foil
distance of about 3 to 4mm (in case of
Type RA: 3 to 6mm) from each terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC
voltage from Table 2 is applied for 60s between the capacitor
lead wires and metal balls.
Type
SA
RA
7
Temperature Characteristics
Char.
Capacitance Change
Within ±10%
B
+20
Within –55
E
%
(Temp. range: -25 to +85°C)
Char.
Temperature Coefficient
SL
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
8
9
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Test Voltage
AC2600V(r.m.s.) ‹50/60Hz›
AC4000V(r.m.s.) ‹50/60Hz›
The capacitance measurement should be made at each step
specified in Table 3.
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5s.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
Solder Temperature : 350±10°C or 260±5°C
Immersion time : 3.5±0.5s (In case of 260±5°C : 10±1s)
The depth of immersion is up to about 1.5 to 2.0mm from the
roof of lead wires.
Capacitor
Heat
Shield
1.5
to 2.0mm
Soldering
Effect
(Non-Preheat)
Molten
Solder
Dielectric
Strength
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
19
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type SA: AC400V / RA: AC500V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Within the specified tolerance
First the capacitor should be
Capacitor
Heat
stored at 120+0/-5°C for
Shield
60+0/-5s.
1.5
Then, as in the figure, the lead
to 2.0mm
wires should be immersed in
Molten
solder of 260+0/-5°C up to 1.5
Solder
to 2.0mm from the root of
terminal for 7.5+0/-1s.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
D.F.
2.5% max.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
Soldering
10 Effect
(On-Preheat)
11
Vibration
Resistance
Humidity
(Under
12
Steady
State)
13
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
Humidity
Loading
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Test Method
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10 to 55Hz and back to 10Hz.
Apply for a total of 6h, 2h each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h berore initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Apply the AC440V (r.m.s.) (in case of Type RA: AC500V (r.m.s.))
for 500±12h at 40±2°C in 90 to 95% relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h berore initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
20
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC400V / RA: AC500V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Impulse Voltage
Each individual capacitor should be subjected to a 8kV (Type
RA: 12kV) impulses for three times. Then the capacitors are
applied to life test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
T2
Apply a voltage from Table 4 for 1000h at 125+2/-0°C, and
relative humidity of 50% max.
14 Life
Dielectric
Strength
Per Item 6
In Case of Type SA rated voltage: AC400V
AC680V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
In Case of Type RA rated voltage: AC500V
AC850V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24h at room condition*.
Tensile
Robustness
15 of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
Bending
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1s.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3s.
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC should
be maintained for 2min after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
C2
L3
R
L2
C3
Cx
Ct
Ut
L4
Oscilloscope
16 Active Flammability
The cheesecloth should not be on fire.
C3
: 0.033μF±5% 10kV
C1,2 : 1μF±10%
L1 to 4 : 1.5mH±20% 16A Rod core choke
: 3μF±5% 10kV
R
: 100Ω±2%
Ct
: Capacitor under test
UAC
: UR±5%
Cx
: Rated Voltage
F
: Fuse, Rated 10A
UR
: Voltage applied to Ct
Ut
Ux
5kV
time
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
21
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC400V / RA: AC500V Specifications and Test Methods
Continued from the preceding page.
Item
The burning time should not exceed 30s.
The tissue paper should not ignite.
Test Method
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Test Specimen
About 8mm
17 Passive Flammability
Specifications
45°
200±5mm
No.
Tissue
About 10mm Thick Board
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±20%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
I.R.
Step
1
2
3
4
Temperature (ºC)
-40+0/-3
Room temp.
125+3/-0
Room temp.
3000MΩ min.
Temperature
and
18
Immersion
Cycle
Dielectric
Strength
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
Temperature (ºC)
Time
(min.)
1
65+5/-0
15
2
0±3
15
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycles
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2ºC for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
22
Time (min.)
30
3
30
3
Cycle time: 500 cycles
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type SA: AC250V or AC300V (Basic Insulation) -Class X1, Y2- (Recommend)
D max.
e
25.0 min.
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A2, A3)
Lead Code
Coating Extension e
ød
A2, A3
Up to the end of crimp
0.6±0.05
D max.
T max.
4
3.0 max.
1. For some capacitance, reduced body size than current
new "Type KY", reduced the diameter size 1~2mm.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength:
AC2000V (for lead spacing F=5mm)
AC2600V (for lead spacing F=7.5mm)
4. Class X1/Y2 capacitors certified by ENEC(VDE)/UL/
CQC/KTC.
5. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
6. Taping available for automatic insertion.
7. Rated Voltage: X1: AC300V(r.m.s.), Y2: AC250V(r.m.s.) or
X1: AC300V(r.m.s.), Y2: AC300V(r.m.s.)
T max.
3.0 max.
Features
3.5±1.0
0.5
e
Applications
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (J2, J3)
Lead Code
Coating Extension e
ød
J2, J3
Up to the end of crimp
0.6±0.05
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification Rated Voltage (250Vac)
Standard No.
ENEC
(VDE)
UL
CQC
KTC
Certified No.
EN 60384-14
40042990
UL 60384-14
IEC 60384-14
KC 60384-14
E37921
CQC15001137840
HU03008-17009
Marking Rated Voltage (250Vac)
Rated Voltage
Item
Example
1 Type Designation SA
2
250Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
5
SA103M
X1 300~
Y2 250~
5D
15
2 Nominal Capacitance
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
4
15 : Made in Thailand
5 Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
300~, 250~
Continued on the following page.
23
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Standard Certification Rated Voltage (300Vac)
Standard No.
ENEC
(VDE)
UL
CQC
Certified No.
Marking Rated Voltage (300Vac)
Rated Voltage
Item
Example
1 Type Designation SA
EN 60384-14
40042990
UL 60384-14
IEC 60384-14
E37921
CQC15001137840
2
2 Nominal Capacitance
300Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
SA103M
X1 300~
Y2 300~
5
15
5D
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
300~
Rated Voltage 250Vac
Lead Spacing F=7.5mm
4
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness T Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE21XSA100KpppT02F
250Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA150KpppT02F
250Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA220KpppT02F
250Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA330KpppT02F
250Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA470KpppT02F
250Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA680KpppT02F
250Vac(r.m.s.)
SL
68pF±10%
8.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA101KpppT02F
250Vac(r.m.s.)
B
100pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA151KpppT02F
250Vac(r.m.s.)
B
150pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA221KpppT02F
250Vac(r.m.s.)
B
220pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA331KpppT02F
250Vac(r.m.s.)
B
330pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA471KpppT02F
250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA681KpppT02F
250Vac(r.m.s.)
B
680pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA102MpppT02F
250Vac(r.m.s.)
E
1000pF±20%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA152MpppT02F
250Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA222MpppT02F
250Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA332MpppT02F
250Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA472MpppT02F
250Vac(r.m.s.)
E
4700pF±20%
10.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA103MpppT02F
250Vac(r.m.s.)
E
10000pF±20% 15.0mm max.
7.5
5.0mm max.
A3B
J3B
N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Individual specification code "T02F" express "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (SA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
Continued on the following page.
24
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Lead Spacing F=5mm
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness
T
Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE21XSA100KpppT01F
250Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE21XSA150KpppT01F
250Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
5.0
5.0mm max.
A2B
J2B
N2A
DE21XSA220KpppT01F
250Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE21XSA330KpppT01F
250Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE21XSA470KpppT01F
250Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE21XSA680KpppT01F
250Vac(r.m.s.)
SL
68pF±10%
8.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2B3SA101KpppT01F
250Vac(r.m.s.)
B
100pF±10%
6.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2B3SA151KpppT01F
250Vac(r.m.s.)
B
150pF±10%
6.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2B3SA221KpppT01F
250Vac(r.m.s.)
B
220pF±10%
6.0mm max.
5.0
5.0mm max.
A2B
J2B
N2A
DE2B3SA331KpppT01F
250Vac(r.m.s.)
B
330pF±10%
6.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2B3SA471KpppT01F
250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2B3SA681KpppT01F
250Vac(r.m.s.)
B
680pF±10%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2E3SA102MpppT01F
250Vac(r.m.s.)
E
1000pF±20%
6.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2E3SA152MpppT01F
250Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2E3SA222MpppT01F
250Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2E3SA332MpppT01F
250Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
5.0
4.0mm max.
A2B
J2B
N2A
DE2E3SA472MpppT01F
250Vac(r.m.s.)
E
4700pF±20%
10.0mm max.
5.0
5.0mm max.
A2B
J2B
N2A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Individual specification code "T01F" express "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V."
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (SA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
4
Rated Voltage 300Vac
Lead Spacing F=7.5mm
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness
T
Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE21XSA100KpppX02F
300Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA150KpppX02F
300Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE21XSA220KpppX02F
300Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA330KpppX02F
300Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA470KpppX02F
300Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE21XSA680KpppX02F
300Vac(r.m.s.)
SL
68pF±10%
8.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA101KpppX02F
300Vac(r.m.s.)
B
100pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA151KpppX02F
300Vac(r.m.s.)
B
150pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA221KpppX02F
300Vac(r.m.s.)
B
220pF±10%
6.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2B3SA331KpppX02F
300Vac(r.m.s.)
B
330pF±10%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA471KpppX02F
300Vac(r.m.s.)
B
470pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2B3SA681KpppX02F
300Vac(r.m.s.)
B
680pF±10%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA102MpppX02F 300Vac(r.m.s.)
E
1000pF±20%
6.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA152MpppX02F 300Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA222MpppX02F 300Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA332MpppX02F 300Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
7.5
4.0mm max.
A3B
J3B
N3A
DE2E3SA472MpppX02F 300Vac(r.m.s.)
E
4700pF±20%
10.0mm max.
7.5
5.0mm max.
A3B
J3B
N3A
DE2E3SA103MpppX02F 300Vac(r.m.s.)
E
10000pF±20% 15.0mm max.
7.5
5.0mm max.
A3B
J3B
N7A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Individual specification code "X02F" express "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (SA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
25
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type RA: AC250V or AC300V (Reinforced Insulation) -Class X1, Y1- (Recommend)
D max.
F±1.0
ød
(in mm)
Lead Code
Coating Extension e
ød
A4
Up to the end of crimp
0.6±0.05
D max.
T max.
3.0 max.
[Bulk]
Vertical Crimp Long (A4)
e
Applications
5
25.0 min.
e
3.5±1.0
0.5
1. For some capacitance, Reduced body size than current
new small "Type KX", reduced the diameter size 1~2mm.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength: AC4000V
4. Class X1/Y1 capacitors certified by ENEC(VDE)/UL/
CQC/KTC.
5. Can be use with a component in appliances requiring
reinforced insulation and double insulation based on
UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
7. Taping available for automatic insertion.
8. Rated Voltage: X1: AC440V(r.m.s.), Y1: AC250V(r.m.s.) or
X1: AC440V(r.m.s.), Y1: AC300V(r.m.s.)
T max.
3.0 max.
Features
ød
F±0.8
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
(in mm)
[Bulk]
Vertical Crimp Short (J4)
Lead Code
Coating Extension e
ød
J4
Up to the end of crimp
0.6±0.05
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification Rated Voltage (250Vac)
Standard No.
ENEC
(VDE)
UL
CQC
KTC
Certified No.
EN 60384-14
40043033
UL 60384-14
IEC 60384-14
KC 60384-14
E37921
CQC16001138225
HU03008-17008
Marking Rated Voltage (250Vac)
Rated Voltage
Item
Example
1 Type Designation RA
2
250Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
5
RA 472M
X1 440~
Y1 250~
5D
15
2 Nominal Capacitance
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
4
15 : Made in Thailand
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
440~, 250~
Continued on the following page.
26
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Standard Certification Rated Voltage (300Vac)
Standard No.
ENEC
(VDE)
UL
CQC
Certified No.
Marking Rated Voltage (300Vac)
Rated Voltage
Item
Example
1 Type Designation RA
EN 60384-14
40043033
UL 60384-14
IEC 60384-14
E37921
CQC16001138225
2
2 Nominal Capacitance
300Vac(r.m.s.)
1
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
RA 472M
X1 440~
Y1 300~
5
15
5D
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
440~, 300~
Rated Voltage 250Vac
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness
T
Long Bulk Short Bulk Taping
(mm)
Temp.
Char.
Capacitance
Body
Dia. D
DE11XRA100KpppN01F 250Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA150KpppN01F 250Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA220KpppN01F 250Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA330KpppN01F 250Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA470KpppN01F 250Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA680KpppN01F 250Vac(r.m.s.)
SL
68pF±10%
8.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA101KpppN01F 250Vac(r.m.s.)
B
100pF±10%
6.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA151KpppN01F 250Vac(r.m.s.)
B
150pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA221KpppN01F 250Vac(r.m.s.)
B
220pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA331KpppN01F 250Vac(r.m.s.)
B
330pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA471KpppN01F 250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA681KpppN01F 250Vac(r.m.s.)
B
680pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1E3RA102MpppN01F 250Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA152MpppN01F 250Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA222MpppN01F 250Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA332MpppN01F 250Vac(r.m.s.)
E
3300pF±20%
10.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1E3RA472MpppN01F 250Vac(r.m.s.)
E
4700pF±20%
12.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
Part Number
AC Rated
Voltage
5
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (RA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
Continued on the following page.
27
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Rated Voltage 300Vac
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness T Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE11XRA100KpppP01F
300Vac(r.m.s.)
SL
10pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA150KpppP01F
300Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRA220KpppP01F
300Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA330KpppP01F
300Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA470KpppP01F
300Vac(r.m.s.)
SL
47pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE11XRA680KpppP01F
300Vac(r.m.s.)
SL
68pF±10%
8.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA101KpppP01F
300Vac(r.m.s.)
B
100pF±10%
6.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA151KpppP01F
300Vac(r.m.s.)
B
150pF±10%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1B3RA221KpppP01F
300Vac(r.m.s.)
B
220pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA331KpppP01F
300Vac(r.m.s.)
B
330pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA471KpppP01F
300Vac(r.m.s.)
B
470pF±10%
7.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RA681KpppP01F
300Vac(r.m.s.)
B
680pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1E3RA102MpppP01F 300Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA152MpppP01F 300Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA222MpppP01F 300Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
10.0
4.0mm max.
A4B
J4B
N4A
DE1E3RA332MpppP01F 300Vac(r.m.s.)
E
3300pF±20%
10.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1E3RA472MpppP01F 300Vac(r.m.s.)
E
4700pF±20%
12.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (RA) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
5
28
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC250V or AC300V / RA: AC250V or AC300V Specifications and Test Methods
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
1
Appearance and Dimensions
No visible defect, and dimensions are within
specified range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
Marking
To be easily legible
The capacitor should be visually inspected.
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
2.5% max.
The capacitance, dissipation factor should be measured at
20°C with 1±0.1kHz and AC1±0.2V(r.m.s.) max.
5
Insulation Resistance (I.R.)
10000MΩ min.
The insulation resistance should be measured with
DC500±50V within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60s.
Between Lead
No failure
Wires
Type
SA
RA
6
Dielectric
Strength
Body
Insulation
No failure
Test Voltage
For lead spacing F=5mm AC2000V(r.m.s.)
For lead spacing F=7.5mm AC2600V(r.m.s.)
AC4000V(r.m.s.)
First, the terminals of the capacitor
about
3 to 4mm
should be connected together. Then,
(in case of
as shown in the figure at right, a metal
Type RA:
foil should be closely wrapped around
3 to 6mm)
Metal
the body of the capacitor to the
Foil
distance of about 3 to 4mm (in case of
Type RA: 3 to 6mm) from each terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC
voltage from Table 2 is applied for 60s between the capacitor
lead wires and metal balls.
Type
SA
RA
7
Temperature Characteristics
Char.
Capacitance Change
Within ±10%
B
+20
Within –55
E
%
(Temp. range: -25 to +85°C)
Char.
Temperature Coefficient
SL
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
8
9
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Test Voltage
AC2600V(r.m.s.)
AC4000V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table 3.
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5s.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
Solder Temperature : 350±10°C or 260±5°C
Immersion time : 3.5±0.5s (In case of 260±5°C : 10±1s)
The depth of immersion is up to about 1.5 to 2.0mm from the
roof of lead wires.
Capacitor
Heat
Shield
1.5
to 2.0mm
Soldering
Effect
(Non-Preheat)
Molten
Solder
Dielectric
Strength
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
29
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type SA: AC250V or AC300V / RA: AC250V or AC300V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Within the specified tolerance
First the capacitor should be
Capacitor
Heat
stored at 120+0/-5°C for
Shield
60+0/-5s.
1.5
Then, as in the figure, the lead
to 2.0mm
wires should be immersed in
Molten
solder of 260+0/-5°C up to 1.5
Solder
to 2.0mm from the root of
terminal for 7.5+0/-1s.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
D.F.
2.5% max.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
Soldering
10 Effect
(On-Preheat)
11
Vibration
Resistance
Humidity
(Under
12
Steady
State)
13
Humidity
Loading
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Test Method
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10 to 55Hz and back to 10Hz.
Apply for a total of 6h, 2h each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Apply the AC300V (r.m.s.) (in case of Type RA: AC440V (r.m.s.))
for 500±12h at 40±2°C in 90 to 95% relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
30
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC250V or AC300V / RA: AC250V or AC300V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
RA: 8kV) impulses for three times. Then the capacitors are
applied to life test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
T2
Apply a voltage from Table 4 for 1000h at 125+2/-0°C, and
relative humidity of 50% max.
14 Life
Dielectric
Strength
Per Item 6
In Case of Type SA rated voltage: AC250V
AC425V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
In Case of Type SA rated voltage: AC300V
AC510V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
In Case of Type RA rated voltage: AC250V or AC300V
AC550V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24h at room condition*.
Tensile
Robustness
15 of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
Bending
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1s.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3s.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
31
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type SA: AC250V or AC300V / RA: AC250V or AC300V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Test Method
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC should
be maintained for 2min after the last discharge.
F
S1
Tr
S2
L1
C1
UAC
R
L2
C2
C3
L3
Cx
Ct
Ut
L4
Oscilloscope
16 Active Flammability
The cheesecloth should not be on fire.
C1,2 : 1μF±10%
C3
: 0.033μF±5% 10kV
L1 to 4 : 1.5mH±20% 16A Rod core choke
Ct
: 3μF±5% 10kV
R
: 100Ω±2%
: Capacitor under test
UAC
: UR±5%
Cx
: Rated Voltage
F
: Fuse, Rated 10A
UR
: Voltage applied to Ct
Ut
Ux
5kV
time
Test Specimen
45°
200±5mm
The burning time should not exceed 30s.
The tissue paper should not ignite.
About 8mm
17 Passive Flammability
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Tissue
About 10mm Thick Board
Temperature
and
18
Immersion
Cycle
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±20%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
I.R.
Dielectric
Strength
Step
1
2
3
4
Temperature (ºC)
-40+0/-3
Room temp.
125+3/-0
Room temp.
3000MΩ min.
Step
Temperature (ºC)
Time
(min.)
1
65+5/-0
15
2
0±3
15
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycles
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC2000V(r.m.s.) 60s (in case of Type RA, apply the
AC4000V(r.m.s.) 60s) then placed at room condition* for
24±2h. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
32
Time (min.)
30
3
30
3
Cycle time: 5 cycles
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type RB: X1: AC760V (Reinforced Insulation) -Class X1, Y1- (Recommend)
D max.
e
25.0 min.
1. Operating temperature range guaranteed up to 125°C.
2. Dielectric strength: AC4000V
3. Class X1/Y1 capacitors certified by ENEC(VDE)/UL/CQC.
4. Can be use with a component in appliances requiring
reinforced insulation and double insulation based on
UL1492, IEC60065 and IEC60950.
5. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
6. Taping available for automatic insertion.
7. Rated Voltage: X1: AC760V(r.m.s.), Y1: AC500V(r.m.s.)
T max.
3.0 max.
Features
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A4)
Lead Code
Coating Extension e
ød
A4
Up to the end of crimp
0.6±0.05
D max.
T max.
Possible to use for X/Y capacitors for AC line filters and
capacitors for primary and secondary coupling, use in
industrial devices such as inverters for motor control.
3.0 max.
Applications
3.5±1.0
0.5
e
ød
F±0.8
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
Standard Certification
UL/cUL
ENEC
(VDE)
CQC
(in mm)
[Bulk]
Vertical Crimp Short (J4)
Lead Code
Coating Extension e
ød
J4
Up to the end of crimp
0.6±0.05
6
Marking
Standard No.
Certified No.
UL 60384-14
DIN 60384-14
EN 60384-14
IEC 60384-14
IEC 60384-14
E37921
Rated Voltage
Item
Example
1 Type Designation RB
2
X1:760Vac(r.m.s.)
40046675
Y1:500Vac(r.m.s.)
1
CQC17001178139
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
5
RB 471K
X1 760~
Y1 500~
5D
15
2 Nominal Capacitance
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
4
15 : Made in Thailand
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
760~,500~
33
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Rated Voltage X1: 760Vac
6
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness T Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE11XRB100KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
10pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRB150KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
15pF±10%
6.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE11XRB220KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
22pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRB330KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
33pF±10%
7.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRB470KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
47pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE11XRB680KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
SL
68pF±10%
9.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RB101KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
100pF±10%
6.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RB151KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
150pF±10%
8.0mm max.
10.0
5.0mm max.
A4B
J4B
N4A
DE1B3RB221KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
220pF±10%
6.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RB331KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
330pF±10%
7.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RB471KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
470pF±10%
8.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1B3RB681KpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
B
680pF±10%
9.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RB102MpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
E
1000pF±20% 8.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RB152MpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
E
1500pF±20% 9.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RB222MpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
E
2200pF±20% 11.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RB332MpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
E
3300pF±20% 13.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
DE1E3RB472MpppR01F
X1: 760Vac(r.m.s.),
Y1: 500Vac(r.m.s.)
E
4700pF±20% 14.0mm max.
10.0
6.0mm max.
A4B
J4B
N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate codes.
Murata part numbers might be changed depending on lead code or any other chagnes. Therefore, please specify only the type name (RB) and capacitance of
products in the part list when it is required for applying safety standard of electric equipments.
34
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type RB: X1: AC760V Specifications and Test Methods
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
1
Appearance and Dimensions
No visible defect, and dimensions are within
specified range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
Marking
To be easily legible
The capacitor should be visually inspected.
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
2.5% max.
The capacitance, dissipation factor should be measured at
20˚C with 1±0.1kHz and AC1±0.2V max.
5
Insulation Resistance (I.R.)
10000MΩ min.
6
7
Dielectric
Strength
Between Lead
No failure
Wires
The capacitor should not be damaged when AC4000V (r.m.s.)
is applied between the lead wires for 60s.
Body
Insulation
First, the terminals of the capacitor
should be connected together. Then,
as shown in the figure at right, a metal
about
foil should be closely wrapped around
3 to 6mm
Metal
the body of the capacitor to the
Foil
distance of about 3 to 6mm from each
terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC4000V
(r.m.s.) is applied for 60s between the capacitor
lead wires and metal balls.
Temperature Characteristics
No failure
Char.
Capacitance Change
Within ±10%
B
+20
Within –55
E
%
(Temp. range: -25 to +85°C)
Char.
Temperature Coefficient
SL
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
8
9
The insulation resistance should be measured with
DC500±50V within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
The capacitance measurement should be made at each step
specified in Table 1.
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5s.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
Solder Temperature : 350±10°C or 260±5°C
Immersion time : 3.5±0.5s (In case of 260±5°C : 10±1s)
The depth of immersion is up to about 1.5 to 2.0mm from the
roof of lead wires.
Capacitor
Heat
Shield
1.5
to 2.0mm
Soldering
Effect
(Non-Preheat)
Molten
Solder
Dielectric
Strength
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
35
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type RB: X1: AC760V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
First the capacitor should be
Capacitor
Heat
stored at 120+0/-5°C for
Shield
60+0/-5s.
1.5
Then, as in the figure, the lead
to 2.0mm
wires should be immersed in
Molten
solder of 260+0/-5°C up to 1.5
Solder
to 2.0mm from the root of
terminal for 7.5+0/-1s.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Capacitance
Within the specified tolerance
D.F.
2.5% max.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
Soldering
10 Effect
(On-Preheat)
11
12
13
Vibration
Resistance
Humidity
(Under
Steady
State)
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
Humidity
Loading
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Test Method
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10 to 55Hz and back to 10Hz.
Apply for a total of 6h, 2h each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Apply the AC760V (r.m.s.) for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h berore initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
36
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type RB: X1: AC760V Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Impulse Voltage
12kV impulses for three times. Then the capacitors are applied
to life test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
T2
Apply a voltage from Table 2 for 1000h at 125+2/-0°C, and
relative humidity of 50% max.
14 Life
Dielectric
Strength
Per Item 6
Applied voltage
AC950V(r.m.s.) except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1 sec.
Pre-treatment:
Capacitor should be stored at 125±2°C for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h before initial measurements. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24h at room condition*.
Tensile
Robustness
15 of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
Bending
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1s.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3s.
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC should
be maintained for 2min after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
C2
L3
R
L2
C3
Cx
Ct
Ut
L4
Oscilloscope
16 Active Flammability
The cheesecloth should not be on fire.
C3
: 0.033μF±5% 10kV
C1,2 : 1μF±10%
L1 to 4 : 1.5mH±20% 16A Rod core choke
: 3μF±5% 10kV
R
: 100Ω±2%
Ct
: Capacitor under test
UAC
: UR±5%
Cx
: Rated Voltage
F
: Fuse, Rated 10A
UR
: Voltage applied to Ct
Ut
Ux
5kV
time
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
37
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type RB: X1: AC760V Specifications and Test Methods
Continued from the preceding page.
Item
The burning time should not exceed 30s.
The tissue paper should not ignite.
Test Method
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Test Specimen
About 8mm
17 Passive Flammability
Specifications
45°
200±5mm
No.
Tissue
About 10mm Thick Board
Temperature
and
18
Immersion
Cycle
Appearance
No marked defect
Capacitance
Change
Char.
B
E
SL
Capacitance Change
Within ±10%
Within ±20%
Within ± 5%
D.F.
Char.
B, E
SL
Specifications
D.F.<
=5.0%
D.F.<
=2.5%
I.R.
Dielectric
Strength
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Temperature (ºC)
-40+0/-3
Room temp.
125+3/-0
Room temp.
3000MΩ min.
Step
Temperature (ºC)
Time
(min.)
1
65+5/-0
15
2
0±3
15
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycles
Per Item 6
Pre-treatment:
Capacitor should be stored at 125±2ºC for 1h, and apply the
AC4000V(r.m.s.) 60s then placed at room condition* for
24±2h. (Do not apply to SL char.)
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
38
Time (min.)
30
3
30
3
Cycle time: 500 cycles
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type KY (Basic Insulation) -Class X1, Y2D max.
e
25.0 min.
F±1.0
ød
[Bulk]
Vertical Crimp Long (A2, A3)
(in mm)
Lead Code
Coating Extension e
ød
A2, A3
Up to the end of crimp
0.6±0.05
D max.
Applications
T max.
3.0 max.
1. Compact size; diameter 25% less than Type KH.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength:
AC2000V (for lead spacing F=5mm)
AC2600V (for lead spacing F=7.5mm)
4. Class X1/Y2 capacitors certified by UL/CSA/VDE/BSI/
SEMKO/DEMKO/FIMKO/NEMKO/ESTI/NSW/CQC.
5. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
6. Taping available for automatic insertion.
7. Rated Voltage: X1: AC250V(r.m.s.), Y2: AC250V(r.m.s.) or
X1: AC250V(r.m.s.), Y2: AC300V(r.m.s.)
T max.
3.0 max.
Features
5.0±1.0
e
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (B2, B3)
Lead Code
Coating Extension e
ød
B2, B3
Up to the end of crimp
0.6±0.05
Standard Certification
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
NSW
CQC
Standard No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
IEC 60384-14
EN 60384-14
IEC 60384-14
AS3250
GB/T6346.14
Certified No.
E37921
1283280
Rated Voltage
UL
CSA
40006273
VDE
KM 37901
BSI
1612608
D-05317
FI29603
P16221234
18.0080
250Vac(r.m.s.)
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
6824
NSW
CQC06001017447
CQC
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
F*# 1#!-,2 !2315&#,2&#!#02'q! 2'-,-$-32&-0# , $#272 ," 0"
'1,#!#11 07@
Standard No.
Certified No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
E37921
1283280
IEC 60384-14
EN 60384-14
IEC 60384-14
AS3250
IEC 60384-14
Rated Voltage
7
40006273
KM 37901
1612608
D-05317
FI29603
P16221234
18.0080
300Vac(r.m.s.)
6824
CQC12001079940
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
Continued on the following page.
39
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Marking
Item
Example
1 Type Designation KY
2 Nominal Capacitance
2
1
5
472M
KY250~
X1Y2 HF
0D
15
3
(Under 100pF: Actual value,
100pF and over: 3 digit system)
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
Halogen Free Mark
250~, 300~
HF
Rated Voltage 250Vac
Lead Spacing F=7.5mm
7
40
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness T Long Bulk Short Bulk Taping
(mm)
Temp.
Char.
Capacitance
Body
Dia. D
DE21XKY100JpppM02F 250Vac(r.m.s.)
SL
10pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE21XKY150JpppM02F 250Vac(r.m.s.)
SL
15pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE21XKY220JpppM02F 250Vac(r.m.s.)
SL
22pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE21XKY330JpppM02F 250Vac(r.m.s.)
SL
33pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE21XKY470JpppM02F 250Vac(r.m.s.)
SL
47pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE21XKY680JpppM02F 250Vac(r.m.s.)
SL
68pF±5%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY101KpppM02F 250Vac(r.m.s.)
B
100pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY151KpppM02F 250Vac(r.m.s.)
B
150pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY221KpppM02F 250Vac(r.m.s.)
B
220pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY331KpppM02F 250Vac(r.m.s.)
B
330pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY471KpppM02F 250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY681KpppM02F 250Vac(r.m.s.)
B
680pF±10%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY102MpppM02F 250Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY152MpppM02F 250Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY222MpppM02F 250Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY332MpppM02F 250Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY472MpppM02F 250Vac(r.m.s.)
E
4700pF±20%
10.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2F3KY103MpppM02F 250Vac(r.m.s.)
F
10000pF±20% 14.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
Part Number
AC Rated
Voltage
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Continued on the following page.
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Lead Spacing F=5mm
Lead
Lead
Lead
Package
Package Package
Long Bulk Short Bulk Taping
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
DE21XKY100JpppM01F
250Vac(r.m.s.)
SL
10pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE21XKY150JpppM01F
250Vac(r.m.s.)
SL
15pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE21XKY220JpppM01F
250Vac(r.m.s.)
SL
22pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE21XKY330JpppM01F
250Vac(r.m.s.)
SL
33pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE21XKY470JpppM01F
250Vac(r.m.s.)
SL
47pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE21XKY680JpppM01F
250Vac(r.m.s.)
SL
68pF±5%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY101KpppM01F 250Vac(r.m.s.)
B
100pF±10%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY151KpppM01F 250Vac(r.m.s.)
B
150pF±10%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY221KpppM01F 250Vac(r.m.s.)
B
220pF±10%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY331KpppM01F 250Vac(r.m.s.)
B
330pF±10%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY471KpppM01F 250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2B3KY681KpppM01F 250Vac(r.m.s.)
B
680pF±10%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2E3KY102MpppM01F 250Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2E3KY152MpppM01F 250Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2E3KY222MpppM01F 250Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2E3KY332MpppM01F 250Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
DE2E3KY472MpppM01F 250Vac(r.m.s.)
E
4700pF±20% 10.0mm max.
5.0
5.0mm max.
A2B
B2B
N2A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "M01" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2000V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Rated Voltage 300Vac
Lead Spacing F=7.5mm
Lead
Lead
Lead
Lead
Body
Package Package Package
Spacing F
Thickness
T
Long Bulk Short Bulk Taping
(mm)
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
DE2B3KY101KpppU02F
300Vac(r.m.s.)
B
100pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY151KpppU02F
300Vac(r.m.s.)
B
150pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY221KpppU02F
300Vac(r.m.s.)
B
220pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY331KpppU02F
300Vac(r.m.s.)
B
330pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY471KpppU02F
300Vac(r.m.s.)
B
470pF±10%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2B3KY681KpppU02F
300Vac(r.m.s.)
B
680pF±10%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY102MpppU02F 300Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY152MpppU02F 300Vac(r.m.s.)
E
1500pF±20%
7.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY222MpppU02F 300Vac(r.m.s.)
E
2200pF±20%
8.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY332MpppU02F 300Vac(r.m.s.)
E
3300pF±20%
9.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2E3KY472MpppU02F 300Vac(r.m.s.)
E
4700pF±20%
10.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
DE2F3KY103MpppU02F 300Vac(r.m.s.)
F
10000pF±20% 14.0mm max.
7.5
5.0mm max.
A3B
B3B
N3A
7
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Individual specification code "U02" expresses "simplicity marking and guarantee of dielectric strength between lead wires: AC2600V."
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KY) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
41
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for General Purpose
Type KX New Small Size (Reinforced Insulation) -Class X1, Y1D max.
25.0 min.
e
F±1.0
ød
(in mm)
Lead Code
Coating Extension e
ød
A4
Up to the end of crimp
0.6±0.05
D max.
T max.
3.0 max.
[Bulk]
Vertical Crimp Long (A4)
e
5.0±1.0
1. We design capacitors much more compact in size than
current Type KX, having reduced the diameter
by 20% max.
2. Operating temperature range guaranteed up to 125°C.
3. Dielectric strength: AC4000V
4. Class X1/Y1 capacitors certified by UL/CSA/VDE/BSI/
SEMKO/DEMKO/FIMKO/NEMKO/ ESTI/IMQ/CQC.
5. Can be use with a component in appliances
requiring reinforced insulation and double
insulation based on UL1492, IEC60065 and IEC60950.
6. Coated with flame-retardant halogen-free* epoxy resin
(conforming to UL94V-0 standard).
* Cl=900ppm max., Br=900ppm max. and
Cl+Br=1500ppm max.
7. Taping available for automatic insertion.
8. Rated Voltage: X1: AC440V(r.m.s.), Y1: AC250V(r.m.s.) or
X1: AC440V(r.m.s.), Y1: AC300V(r.m.s.)
T max.
3.0 max.
Features
ød
F±0.8
Applications
(in mm)
Ideal for use as X/Y capacitors for AC line filters
and primary-secondary coupling on switching power
supplies and AC adapters.
Do not use these products in any automotive
power train or safety equipment including battery
chargers for electric vehicles and plug-in hybrids.
Only Murata products clearly stipulated as
"for Automotive use" on its catalog can be used
for automobile applications such as power train and
safety equipment.
8
42
* Small sized Type KX differs from current Type KX
in electrical characteristics, such as the voltage
dependency, capacitance temperature dependency,
and Dielectric strength.
Therefore, before replacing current Type KX,
please make a performance check by equipment.
Please also refer to Notice (Rating) item 2,
"Performance Check by Equipment," below.
[Bulk]
Vertical Crimp Short (B4)
Lead Code
Coating Extension e
ød
B4
Up to the end of crimp
0.6±0.05
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Certification Rated Voltage (AC250V) B, E Char.
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IMQ
CQC
Standard No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
Marking Rated Voltage (AC250V) B, E Char.
Certified No.
Item
Example
E37921
1343810
1 Type Designation KX
40002831
2
1
KM 37901
1612604
D-05321
FI29602
P16221232
18.0079
V4069
CQC04001011643
IEC 60384-14
EN 60384-14
EN 60384-14
GB/T6346.14
Sep.14,2018
472M
KX250~
X1Y1 HF
15
0D
5
2 Nominal Capacitance (3 digit system)
3
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
Halogen Free Mark
250~
HF
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
F*# 1#!-,2 !2315&#,2&#!#02'q! 2'-,-$-32&-0# , $#272 ," 0"
'1,#!#11 07@
Standard Certification Rated Voltage (AC300V) B, E Char.
UL
CSA
VDE
BSI
SEMKO
DEMKO
FIMKO
NEMKO
ESTI
IMQ
CQC
Standard No.
UL60384-14
CSA E60384-14
IEC 60384-14
EN 60384-14
EN 60065 (8.8, 14.2)
IEC 60384-14
EN 60384-14
Marking Rated Voltage (AC300V) B, E Char.
Certified No.
Item
Example
E37921
1343810
1 Type Designation KX
40002831
2
1
KM 37901
1612604
D-05321
FI29602
P16221232
18.0079
V4069
CQC12001079941
IEC 60384-14
EN 60384-14
EN 60384-14
IEC 60384-14
472M
KX300~
X1Y1 HF
5
15
0D
2 Nominal Capacitance (3 digit system)
3
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y1
Rated Voltage Mark
Halogen Free Mark
300~
HF
F&#!#02'q! 2'-,,3+ #0+'%&2!& ,%#"3#2-0#4'1'-,-$2&# ..*'! 2'-,
12 ," 0" ,"!& ,%#1',2� ,%#-$ !/3'1'2'-,@
Rated Voltage 250Vac
Lead
Lead
Lead
Package
Package Package
Long Bulk Short Bulk Taping
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
DE1B3KX101KpppN01F
250Vac(r.m.s.)
B
100pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX151KpppN01F
250Vac(r.m.s.)
B
150pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX221KpppN01F
250Vac(r.m.s.)
B
220pF±10%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX331KpppN01F
250Vac(r.m.s.)
B
330pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX471KpppN01F
250Vac(r.m.s.)
B
470pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX681KpppN01F
250Vac(r.m.s.)
B
680pF±10%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX102MpppN01F 250Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX152MpppN01F 250Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX222MpppN01F 250Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX332MpppN01F 250Vac(r.m.s.)
E
3300pF±20% 10.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX472MpppN01F 250Vac(r.m.s.)
E
4700pF±20% 12.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
8
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
Please contact us when less than 100pF capacitance product is necessary.
Continued on the following page.
43
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Continued from the preceding page.
Rated Voltage 300Vac
Lead
Lead
Lead
Package
Package Package
Long Bulk Short Bulk Taping
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
DE1B3KX101KpppP01F
300Vac(r.m.s.)
B
100pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX151KpppP01F
300Vac(r.m.s.)
B
150pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX221KpppP01F
300Vac(r.m.s.)
B
220pF±10%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX331KpppP01F
300Vac(r.m.s.)
B
330pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX471KpppP01F
300Vac(r.m.s.)
B
470pF±10%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1B3KX681KpppP01F
300Vac(r.m.s.)
B
680pF±10%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX102MpppP01F
300Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX152MpppP01F
300Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX222MpppP01F
300Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX332MpppP01F
300Vac(r.m.s.)
E
3300pF±20% 10.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
DE1E3KX472MpppP01F
300Vac(r.m.s.)
E
4700pF±20% 12.0mm max.
10.0
7.0mm max.
A4B
B4B
N4A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KX) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
8
44
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KY/KX Specifications and Test Methods
Operating Temperature Range: -40 to +125°C (Except for UL/VDE, -25 to +125°C)
No.
Item
Specifications
Test Method
1
Appearance and Dimensions
No visible defect, and dimensions are within
specified range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
Marking
To be easily legible
The capacitor should be visually inspected.
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
Q
Char.
B, E
F
SL
5
Insulation Resistance (I.R.)
Specifications
D.F.<
=2.5%
D.F.<
=5.0%
Q>
=400+20C*(C
(C>
=1000
=30pF)
10000MΩ min.
The capacitance, dissipation factor and Q should be measured
at 20°C with 1±0.1kHz (char. SL: 1±0.1MHz) and AC5V(r.m.s.)
max.
The insulation resistance should be measured with
DC500±50V within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60s.
Between Lead
No failure
Wires
Type
KY
KX
6
Dielectric
Strength
Body
Insulation
No failure
Test Voltage
For lead spacing F=5mm AC2000V(r.m.s.)
For lead spacing F=7.5mm AC2600V(r.m.s.)
AC4000V(r.m.s.)
First, the terminals of the capacitor
about
3 to 4mm
should be connected together. Then,
(in case of
as shown in the figure at right, a metal
Type KX:
foil should be closely wrapped around
3 to 6mm)
Metal
the body of the capacitor to the
Foil
distance of about 3 to 4mm (in case of
Type KX: 3 to 6mm) from each terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC
voltage from Table 2 is applied for 60s between the capacitor
lead wires and metal balls.
Type
KY
KX
7
Temperature Characteristics
Char.
Capacitance Change
B
Within ±10%
+20
E
Within –55
%
+30
F
Within –80
%
(Temp. range: -25 to +85°C)
Char.
Temperature Coefficient
SL
+350 to -1000ppm/°C
(Temp. range: +20 to +85°C)
8
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Test Voltage
AC2600V(r.m.s.)
AC4000V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table 3.
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
The lead wire of a capacitor should be dipped into molten
solder for 2±0.5s.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
* "C" expresses nominal capacitance value (pF).
Continued on the following page.
45
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type KY/KX Specifications and Test Methods
Continued from the preceding page.
No.
9
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±10%
Soldering
I.R.
Effect
(Non-Preheat)
As shown in the figure, the lead
Capacitor
wires should be immersed in solder Heat
Shield
of 350±10°C or 260±5°C up to 1.5
1.5
to 2.0mm from the root of
to 2.0mm
terminal for 3.5±0.5s (10±1s for
Molten
260±5°C).
Solder
Pre-treatment:
Capacitor should be stored at 85±2°C for 1h, then placed at
room condition*2 for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*2.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Within ±10%
I.R.
1000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Within the specified tolerance
First the capacitor should be
Capacitor
Heat
stored at 120+0/-5°C for
Shield
60+0/-5s.
1.5
Then, as in the figure, the lead
to 2.0mm
wires should be immersed in
Molten
solder of 260+0/-5°C up to 1.5
Solder
to 2.0mm from the root of
terminal for 7.5+0/-1s.
Pre-treatment:
Capacitor should be stored at 85±2°C for 1h, then placed at
room condition*2 for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*2.
Soldering
10 Effect
(On-Preheat)
11
Vibration
Resistance
D.F.
Q
Char.
B, E
F
SL
12
Humidity
(Under
Steady
State)
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
Char.
B, E
F
Specifications
D.F.<
=5.0%
D.F.<
=7.5%
1
Q>
=275+5/2C* (C
(C>
=350
=30pF)
SL
Humidity
13
Loading
Specifications
D.F.<
=2.5%
D.F.<
=5.0%
1
Q>
=400+20C* (C
(C>
=1000
=30pF)
Appearance
D.F.
Q
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±15%
Within ± 5%
Char.
B, E
F
Specifications
D.F.<
=5.0%
D.F.<
=7.5%
1
Q>
=275+5/2C* (C
(C>
=350
=30pF)
D.F.
Q
SL
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Test Method
The capacitor should be firmly soldered to the supporting lead
wire and vibrated at a frequency range of 10 to 55Hz, 1.5mm in
total amplitude, with about a 1-minute rate of vibration change
from 10 to 55Hz and back to 10Hz.
Apply for a total of 6h, 2h each in 3 mutually
perpendicular directions.
Set the capacitor for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*2.
Apply the rated voltage for 500±12h at 40±2°C in 90 to 95%
relative humidity.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*2.
*1 "C" expresses nominal capacitance value (pF).
*2 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
46
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KY/KX Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Impulse Voltage
Each individual capacitor should be subjected to a 5kV (Type
KX: 8kV) impulses for three times. Then the capacitors are
applied to life test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
14 Life
T2
Dielectric
Strength
Per Item 6
Apply a voltage from Table 4 for 1000h at 125+2/-0°C, and
relative humidity of 50% max.
Applied Voltage
170% of Rated Voltage except that once each hour the
voltage is increased to AC1000V(r.m.s.) for 0.1s.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Tensile
Robustness
15 of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1s.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returned to its
original position and bent 90° in the opposite direction at the
rate of one bend in 2 to 3s.
Bending
The capacitor should be individually wrapped in at least one but
not more than two complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC should
be maintained for 2min after the last discharge.
F
S1
Tr
S2
C1
UAC
L1
C2
L3
R
L2
C3
Cx
Ct
Ut
L4
Oscilloscope
16 Active Flammability
The cheesecloth should not be on fire.
C1,2 : 1μF±10%
C3
: 0.033μF±5% 10kV
L1 to 4 : 1.5mH±20% 16A Rod core choke
: 3μF±5% 10kV
R
: 100Ω±2%
Ct
: Capacitor under test
UAC
: UR±5%
Cx
: Rated Voltage
F
: Fuse, Rated 10A
UR
: Voltage applied to Ct
Ut
Ux
5kV
time
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
47
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KY/KX Specifications and Test Methods
Continued from the preceding page.
Item
The burning time should not exceed 30s.
The tissue paper should not ignite.
Test Method
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Test Specimen
About 8mm
17 Passive Flammability
Specifications
45°
200±5mm
No.
Tissue
About 10mm Thick Board
Appearance
No marked defect
Capacitance
Change
Char.
B
E, F
SL
Capacitance Change
Within ±10%
Within ±20%
Within ± 5%
Char.
B, E
F
Specifications
D.F.<
=5.0%
D.F.<
=7.5%
1
Q>
=275+5/2C* (C
350
(C>
=
=30pF)
D.F.
Q
Temperature
and
18
Immersion
Cycle
SL
I.R.
Dielectric
Strength
3000MΩ min.
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Step
1
2
3
4
Temperature (ºC)
-40+0/-3
Room temp.
125+3/-0
Room temp.
Step
Temperature (ºC)
Time
(min.)
1
65+5/-0
15
2
0±3
15
Immersion
Water
Clean
water
Salt
water
Cycle time: 2 cycles
Per Item 6
Pre-treatment:
Capacitor should be stored at 85±2˚C for 1h, then placed at
room condition*2 for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition*2.
*1 "C" expresses nominal capacitance value (pF).
*2 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
48
Time (min.)
30
3
30
3
Cycle time: 5 cycles
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Characteristics Data (Typical Example)
Capacitance - Temperature Characteristics
40
20
SL
Cap. Change (%)
0
B
B
SL
-20
-40
E
-60
F
E
-80
F
-100
-40
-20
0
20
40
60
80
Temperature (°C)
100
120
140
Insertion Loss - Frequency Characteristics
Type RA (AC500V(r.m.s.))
0
0
-10
-10
Insertion Loss (dB)
Insertion Loss (dB)
Type SA (AC400V(r.m.s.))
-20
(2) (1)
-30
(6)
-40
-50
(5)
(3)
(4)
(2) (1)
(3)
-30
(6)
-40
(7)
1
-20
10
100
-50
1000
1
(Out Put Power)
100mW (20dBm)
Type RA (AC500V(r.m.s.))
(Out Put Power)
100mW (20dBm)
0
0
-10
-10
-20
(2) (1)
-40
-50
(3)
10
-20
(2)
-30
(Out Put Power)
100mW (20dBm)
(1)
(3)
(6)
-40
100
1000
-50
1
(1) DE2B3SA101KA3BT02F
(2) DE2B3SA221KA3BT02F
(3) DE2B3SA681KA3BT02F
(4) DE2E3SA102MA3BT02F
(5) DE2E3SA222MA3BT02F
(6) DE2E3SA472MA3BT02F
(7) DE2E3SA103MA3BT02F
(5)
10
Frequency (MHz)
Type SA (AC250V(r.m.s.))
(1) DE1B3RA101KA4BQ01F
(2) DE1B3RA221KA4BQ01F
(3) DE1B3RA681KA4BQ01F
(4) DE1E3RA102MA4BQ01F
(5) DE1E3RA222MA4BQ01F
(6) DE1E3RA472MA4BQ01F
(4)
(7)
1
1000
Type RA (AC250V(r.m.s.))
Insertion Loss (dB)
Insertion Loss (dB)
Type SA (AC250V(r.m.s.))
(4)
(6) (5)
100
Frequency (MHz)
(1) DE2B3SA101KA3BY02F
(2) DE2B3SA221KA3BY02F
(3) DE2B3SA681KA3BY02F
(4) DE2E3SA102MA3BY02F
(5) DE2E3SA222MA3BY02F
(6) DE2E3SA472MA3BY02F
(7) DE2E3SA103MA3BY02F
-30
(4)
10
Frequency (MHz)
Type SA (AC400V(r.m.s.))
(5)
100
1000
Frequency (MHz)
Type RA (AC250V(r.m.s.))
(Out Put Power)
100mW (20dBm)
(1) DE1B3RA101KA4BN01F
(2) DE1B3RA221KA4BN01F
(3) DE1B3RA681KA4BN01F
(4) DE1E3RA102MA4BN01F
(5) DE1E3RA222MA4BN01F
(6) DE1E3RA472MA4BN01F
Continued on the following page.
49
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Characteristics Data (Typical Example)
Continued from the preceding page.
Type KX New Small Size
0
10
10
Insertion Loss (dB)
Insertion Loss (dB)
Type KY
0
20
(1)
30
(2)
(3)
(5) (4)
(6)
40
20
(1)
(2)
(3)
30
(4)
(5)
40
(6)
(7)
50
1
10
100
50
1000
1
10
Type KY
Signal power: 1mW
100
1000
Frequency (MHz)
Frequency (MHz)
(1) DE2B3KY101KA2B****
(2) DE2B3KY221KA2B****
(3) DE2B3KY471KA2B****
(4) DE2E3KY102MA2B****
(5) DE2E3KY222MA2B****
(6) DE2E3KY472MA2B****
(7) DE2F3KY103MA3B****
Type KX New Small Size
Signal power: 1mW
(1) DE1B3KX101KA4BN01F
(2) DE1B3KX221KA4BN01F
(3) DE1B3KX471KA4BN01F
(4) DE1E3KX102MA4BN01F
(5) DE1E3KX222MA4BN01F
(6) DE1E3KX472MA4BN01F
Leakage Current Characteristics
Type SA (AC400V(r.m.s.)) (B char.)
Type SA (AC400V(r.m.s.)) (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
1.5
1.0
F
3BY02
81KA
B3SA6
DE2
0.5
KA3BY02F
DE2B3SA221
3BY02F
1KA
A10
DE2B3S
0.0
0
500
1000
1500
AC voltage [V(r.m.s.)]
2000
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
2.0
2500
7.5
7.0
6.5
6.0
5.5
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
E3S
DE2
DE2E3SA222MA3BY02F
DE2E3SA102MA3BY02F
0
500
1000
1500
AC voltage [V(r.m.s.)]
2000
2500
Type RA (AC500V(r.m.s.)) (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
2.0
5.0
Leakage current [mA(r.m.s.)]
4.5
Leakage current [mA(r.m.s.)]
F
A3BY02
A472M
DE2E3S
Type RA (AC500V(r.m.s.)) (B char.)
1.5
F
BQ01
1.0
KA4
A681
3R
DE1B
0.5
Q01F
3RA221KA4B
DE1B
DE1B3RA101KA4BQ01F
0.0
F
Y02
A3B
3M
A10
0
1000
2000
AC voltage [V(r.m.s.)]
3000
F
BQ01
MA4
472
E3RA
DE1
4.0
3.5
3.0
2.5
Q01F
222MA4B
DE1E3RA
2.0
1.5
DE1E3RA102MA4BQ01F
1.0
0.5
4000
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
Continued on the following page.
50
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Characteristics Data (Typical Example)
Continued from the preceding page.
Type SA (AC250V(r.m.s.)) (B char.)
Type SA (AC250V(r.m.s.)) (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
2.0
6.5
6.0
1.0
BT02F
81KA3
E2B3SA6
D
0.5
KA3BT02F
DE2B3SA221
3BT02F
01KA
3SA1
DE2B
0.0
0
500
1000
1500
AC voltage [V(r.m.s.)]
2000
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
1.5
DE
5.0
4.5
4.0
3.5
3.0
F
72MA3BT02
DE2E3SA4
2.5
2.0
1.5
DE2E3SA222MA3BT02F
DE2E3SA102MA3BT02F
1.0
0.5
0.0
2500
F
BT02
3MA3
A10
2E3S
5.5
0
Type RA (AC250V(r.m.s.)) (B char.)
500
1000
1500
AC voltage [V(r.m.s.)]
2000
2500
Type RA (AC250V(r.m.s.)) (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
5.0
2.0
1.5
1.0
0.5
0.0
F
4BN01
681KA
RA
DE1B3
4BN01F
DE1B3RA221KA
4BN01F
01KA
DE1B3RA1
0
1000
2000
AC voltage [V(r.m.s.)]
3000
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
4.5
4.0
3.0
2.5
2.0
4BN01F
DE1E3RA222MA
1.5
1.0
DE1E3RA102MA4BN01F
0.5
0.0
4000
0
Type KY (B char.)
1000
2000
AC voltage [V(r.m.s.)]
3000
AC voltage : 60Hz
Temperature: 25°C
1.0
6.0
0.8
0.6
*
B***
KA2
71
KY4
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
4000
Type KY (E,F char.)
AC voltage : 60Hz
Temperature: 25°C
B3
DE2
0.4
**
2B**
21KA
3KY2
B
2
E
D
01KA2B****
DE2B3KY1
0.2
0.0
01F
MA4BN
RA472
DE1E3
3.5
0
1000
2000
AC voltage [V(r.m.s.)]
5.0
Y1
2F3K
DE
3.0
****
472MA2B
DE2E3KY
2.0
DE2E3KY222MA2B****
DE2E3KY102MA2B****
1.0
3000
****
A3B
03M
4.0
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
Continued on the following page.
51
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Characteristics Data (Typical Example)
Continued from the preceding page.
Type KX New Small Size (B char.)
Type KX New Small Size (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
4.0
0.8
KX47
DE1B3
0.6
KX
E1B3
F
N01
A4B
221K
D
0.4
0.2
0.0
52
N01F
1KA4B
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
1.0
A4BN01F
1F
4BN0
72MA
3KX4
DE1E
3.0
2.0
MA4BN01F
DE1E3KX222
1.0
DE1E3KX102MA4BN01F
101K
DE1B3KX
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
0.0
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Packaging
Taping Specifications
12.7mm pitch / lead spacing 5mm taping
Vertical crimp type
(Lead Code: N2)
ΔS
P2
P
ΔS
D
P
ΔS
ΔS
D
L
W1
W
øD0
P0
øD0
P0
Δh1
O Δh2
*
T max.
Marked side
3.0 max.
H0
Lead Code
N2, N3, N4, N7
*
t2
Item
ød
F
W 0 W2
H0
P1
ød
L
F
W0 W2
H0
P1
t1
Code
N2
N3
N7
N4
Pitch of component
P
12.7±1.0
15.0±2.0
30.0±2.0
25.4±2.0
Pitch of sprocket hole
P0
12.7±0.3
15.0±0.3
12.7±0.3
Lead spacing
F
5.0+0.8
-0.2
7.5±1.0
10.0±1.0
Length from hole center to component center
P2
6.35±1.3
7.5±1.5
—
Length from hole center to lead
P1
3.85±0.7
3.75±1.0
7.7±1.5
Body diameter
D
Deviation along tape, left or right
ΔS
Carrier tape width
W
Position of sprocket hole
W1
Lead distance between reference
H0
18.0+2.0
-0
and bottom planes
H
–
See the individual product specifications.
0±1.0
0±2.0
18.0±0.5
9.0±0.5
18.0 +2.0
-0
–
+0.5 to -1.0
Protrusion length
Diameter of sprocket hole
øD0
4.0±0.1
Lead diameter
ød
0.6±0.05
Total tape thickness
t1
0.6±0.3
Total thickness, tape and lead wire
t2
1.5 max.
Body thickness
T
See the individual product specifications.
Portion to cut in case of defect
L
11.0+0
-1.0
Hold down tape width
W0
11.5 min.
Hold down tape position
W2
Coating extension on lead
W
e
D
W
e
W1
25.4mm pitch / lead spacing 10.0mm taping
Vertical crimp type
(Lead Code: N4)
e
P
øD0
P0
30mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N7)
P2
ød
F
W
øD0
P0
W0 W2
H0
W1
P1
L
ød
L
F
W0 W2
H0
P1
W1
D
P
e
P2
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N3)
e
Deviation across tape, front
Δh1
Deviation across tape, rear
Δh2
1.5±1.5
Up to the end of crimp
1.0 max.
Up to the end of crimp
2.0 max.
(in mm)
Continued on the following page.
53
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging
Continued from the preceding page.
Packaging Styles
Bulk
Taping
Polyethylene Bag
Ammo Pack
Minimum Quantity (Order in Sets Only)
[Bulk]
(pcs./Bag)
Body Dia. D
(mm)
Type SA
Type RA
Type RB
Type KY
Type KX (New Small Size)
6
Lead Code
Ap
Lead Code
Bp, Jp
Long
Short
500
500
1
7
250 *
500
8 to 11
250
500
12 to 14
200
250
15 to 17
100
200
*1 Lead Spacing F=5.0mm (Code: A2): 500pcs.
[Taping]
Lead Code
N3
N4
N7
–
900
–
400
1,500 *2
1,000
–
400
Type RA (AC500V), Type RB
–
–
500
–
Type RA (AC250V or AC300V)
–
–
600
–
1,000
900
–
–
–
–
500
–
Type SA (AC400V)
Type SA (AC250V or AC300V)
Type KY
Type KX (New Small Size)
2
* Body Dia. D (mm) 9, 10: 1,000pcs.
54
(pcs./Ammo Pack)
N2
C85E.pdf
Sep.14,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
!Caution
!Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
(Apply to B/E/F Char.)
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmospheric temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's
characteristics and reliability. (Never attempt to perform
measurement with the cooling fan running. Otherwise,
accurate measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
55
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, the capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, test
voltage should be applied with the zero cross.* At the
end of the test time, the test voltage should be reduced
to near zero, and then capacitor's lead or terminal should
be taken off the output of the withstanding voltage test
equipment.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, the surge
voltage may rise, and therefore, a defect may be caused.
*ZERO CROSS is the point where voltage sine wave
passes 0V. See the figure at right.
4. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
56
Voltage sine wave
0V
zero cross
C85E.pdf
Sep.14,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
!Caution
!Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. Also, avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
Use capacitors within 6 months after delivery.
Check the solderability after 6 months or more.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
!Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
Soldering the capacitor with a soldering iron should
be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
3. Bonding, Resin Molding and Coating
For bonding, molding or coating this product, verify
that these processes do not affect the quality of the
capacitor by testing the performance of the bonded,
molded or coated product in the intended equipment.
When the amount of applications, dryness/hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc). are unsuitable, the outer coating resin
of a capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin
or coating may cause outer coating resin cracking
and/or ceramic element cracking of a capacitor in a
temperature cycling.
4. Treatment after Bonding, Resin Molding and Coating
When the outer coating is hot (over 100 degrees C.)
after soldering, it becomes soft and fragile.
Therefore, please be careful not to give it mechanical
stress.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
!Caution (Handling)
Vibration and Impact
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
57
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice
Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
Notice (Rating)
1. Capacitance Change of Capacitors
(1) For SL char.
Capacitance might change a little depending on a
surrounding temperature or an applied voltage.
Please contact us if you use a strict constant time
circuit.
(2) For B/E/F char.
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. Therefore,
it is not likely to be suitable for use in a constant
time circuit.
Please contact us if you need detailed information.
58
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 (B/E/F char.) ceramic
capacitors have voltage dependence characteristics
and temperature dependence characteristics in
capacitance, so the capacitance value may change
depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
C85E.pdf
Sep.14,2018
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Safety Standard Certified Lead Type Disc Ceramic Capacitors for Automotive
Type KJ -Class X1, Y2- (For Automotive Use/AC Line Filter of PHEV/EV Charger)
D max.
e
25.0 min.
1. Capacitors designed for AC line filters for PHEV/EV.
2. Meet AEC-Q200
3. Heat cycle: 1000cycle (-55/+125 deg.)
4. Class X1/Y2 capacitors certified by UL/ENEC(VDE).
5. Rated Voltage: AC300V
6. Coated with flame-retardant epoxy resin
(conforming to UL94V-0 standard).
7. Available product for RoHS Restriction
(EU Directive 2002/95/EC).
8. Taping available for automatic insertion.
T max.
3.0 max.
Features
F±1.0
ød
(in mm)
[Bulk]
Vertical Crimp Long (A3)
Lead Code
Coating Extension e
ød
A3
Up to the end of crimp
0.6±0.05
Applications
1. Ideal for use as Y capacitors for AC line filters
and primary-secondary coupling on battery chargers
for PHEV/EV.
2. Ideal for use as a filter capacitor for DC-DC
converters for PHEV/EV and HEV.
T max.
3.0 max.
D max.
5.0±1.0
e
ød
F±0.8
(in mm)
[Bulk]
Vertical Crimp Short (B3)
Standard Certification
ENEC (VDE)
Coating Extension e
ød
B3
Up to the end of crimp
0.6±0.05
Marking
Standard No.
UL
Lead Code
UL 60384-14
EN 60384-14
IEC 60384-14
Certified No.
Rated Voltage
Example
Item
E37921
1 Type Designation KJ
40031217
AC300V(r.m.s.)
2 Nominal Capacitance
2
1
5
472M
KJ300~
X1 Y2
1D
15
(Marked with 3 figures)
3
3 Capacitance Tolerance
4 Company Name Code
15 : Made in Thailand
4
5 Manufactured Date Code
Class Code
X1Y2
Rated Voltage Mark
300~
Part Number
AC Rated
Voltage
Temp.
Char.
Capacitance
Body
Dia. D
Lead
Spacing F
(mm)
Body
Thickness T
Lead
Package
Long Bulk
Lead
Package
Short Bulk
Lead
Package
Taping
DE6B3KJ101Kppp
300Vac(r.m.s.)
B
100pF±10%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6B3KJ151Kppp
300Vac(r.m.s.)
B
150pF±10%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6B3KJ221Kppp
300Vac(r.m.s.)
B
220pF±10%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6B3KJ331Kppp
300Vac(r.m.s.)
B
330pF±10%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6B3KJ471Kppp
300Vac(r.m.s.)
B
470pF±10%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6B3KJ681Kppp
300Vac(r.m.s.)
B
680pF±10%
9.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6E3KJ102Mppp
300Vac(r.m.s.)
E
1000pF±20%
7.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6E3KJ152Mppp
300Vac(r.m.s.)
E
1500pF±20%
8.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6E3KJ222Mppp
300Vac(r.m.s.)
E
2200pF±20%
9.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6E3KJ332Mppp
300Vac(r.m.s.)
E
3300pF±20%
10.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
DE6E3KJ472Mppp
300Vac(r.m.s.)
E
4700pF±20%
12.0mm max.
7.5
7.0mm max.
A3B
B3B
N3A
Three blank columns are filled with the lead and packaging codes. Please refer to the 3 columns on the right for the appropriate code.
Murata part numbers might be changed depending on lead code or any other changes. Therefore, please specify only the type name (KJ) and capacitance of
products in the parts list when it is required for applying safety standard of electric equipment.
9
59
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Type KJ Specifications and Test Methods
Operating Temperature Range: -40 to +125°C
No.
Item
Specifications
Test Method
1
Appearance and Dimensions
No visible defect, and dimensions are within
specified range.
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
2
Marking
To be easily legible
The capacitor should be visually inspected.
3
Capacitance
Within specified tolerance
4
Dissipation Factor (D.F.)
5
Insulation Resistance (I.R.)
Char.
B, E
Specifications
D.F.<
=2.5%
10000MΩ min.
The dissipation factor should be measured at 20°C with
1±0.1kHz and AC5V(r.m.s.) max.
The insulation resistance should be measured with
DC500±50V within 60±5s of charging.
The voltage should be applied to the capacitor through a
resistor of 1MΩ.
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60s.
Between Lead
No failure
Wires
Type
KJ
6
Dielectric
Strength
Body
Insulation
No failure
Test Voltage
AC2600V(r.m.s.)
First, the terminals of the capacitor
should be connected together. Then,
as shown in the figure at right, a metal
foil should be closely wrapped around
Metal
the body of the capacitor to the
about
Foil
3 to 4mm
distance of about 3 to 4mm from
each terminal.
Metal
Then, the capacitor should be inserted
Balls
into a container filled with metal balls
of about 1mm diameter. Finally, AC
voltage from Table 2 is applied for 60s between the capacitor
lead wires and metal balls.
Type
KJ
Test Voltage
AC2600V(r.m.s.)
The capacitance measurement should be made at each step
specified in Table 3.
7
Temperature Characteristics
Char.
Capacitance Change
Within ±10%
B
+20
Within –55
E
%
(Temp. range: -25 to +85°C)
Step
1
2
3
4
5
Temperature (ºC)
20±2
-25±2
20±2
85±2
20±2
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h before initial measurements.
8
9
9
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the
circumferential direction.
Solderability
Appearance
No marked defect
Capacitance
Change
Within ±10%
Resistance to I.R.
Soldering Heat
Dielectric
Strength
1000MΩ min.
Per Item 6
Should be placed into steam aging for 8h±15min. After the
steam aging, the lead wire of a capacitor should be dipped into
an ethanol solution of 25% rosin and then into molten solder
for 5+0/-0.5s.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
As shown in the figure, the lead
Capacitor
wires should be immersed in solder Heat
Shield
of 260±5°C up to 1.5 to 2.0mm
1.5
from the root of terminal for 10±1s.
to 2.0mm
Pre-treatment:
Molten
Capacitor should be stored at
Solder
125±3°C for 1h, then placed at
room condition* for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
60
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KJ Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Appearance
No marked defect
Capacitance
Within the specified tolerance
10 Vibration
D.F.
11
Mechanical
Shock
Humidity
(Under
12
Steady
State)
13
Humidity
Loading
Char.
B, E
Specifications
D.F.<
=2.5%
Appearance
No marked defect
Capacitance
Within the specified tolerance
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
10000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±15%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±15%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Appearance
No marked defect
Capacitance
Change
Within ±20%
I.R.
3000MΩ min.
Test Method
Solder the capacitor and gum
up the body to the test jig
Resin (Adhesive)
(glass epoxy board) by resin
(adhesive).
The capacitor should be firmly soldered to the supporting lead
wire, 1.5mm in total amplitude, with about a 20 minutes rate of
vibration change from 10Hz to 2000Hz and back to 10Hz.
This motion should be applied 12 times in each of 3 mutually
perpendicular directions (total of 36 times).
The acceleration is 5g max.
Solder the capacitor and gum
up the body to the test
Resin (Adhesive)
jig (glass epoxy board) by resin
(adhesive).
Three shocks in each direction should be applied along 3
mutually perpendicular axes to and from of the test specimen
(18 shocks).
The specified test pulse should be half-sine and should have a
duration: 0.5ms, peak value: 100g and velocity change: 4.7m/s
Set the capacitor for 1000±12h at 85±3°C in 80 to 85%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Apply the rated voltage for 1000±12h at 85±3°C in 80 to 85%
relative humidity.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
Impulse Voltage
Each individual capacitor should be subjected to a 5kV
impulses for three times. Then the capacitors are applied to life
test.
100 (%)
90
Front time (T1) =1.2μs=1.67T
Time to half-value (T2) =50μs
50
30
0
t
T
T1
T2
Apply a voltage from Table 4 for 1000h at 125+2/-0°C, and
relative humidity of 50% max.
14 Life
Dielectric
Strength
Per Item 6
Applied Voltage
AC510V(r.m.s.) , except that once each hour
the voltage is increased to AC1000V(r.m.s.) for 0.1s.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h before initial measurements.
Post-treatment:
Capacitor should be stored for 1 to 2h at room condition*.
9
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
61
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KJ Specifications and Test Methods
Continued from the preceding page.
No.
Item
Specifications
Tensile
Robustness
15 of
Terminations
Lead wire should not be cut off. Capacitor should
not be broken.
Bending
Test Method
As shown in the figure at right, fix the body
of the capacitor and apply a tensile weight
gradually to each lead wire in the radial
direction of the capacitor up to 10N and keep
it for 10±1s.
W
Each lead wire should be subjected to 5N of weight and bent
90° at the point of egress, in one direction, then returend to
its original position and bent 90° in the opposite direction at
the rate of one bend in 2 to 3s.
The capacitor should be individually wrapped in at least one,
but not more than two, complete layers of cheesecloth. The
capacitor should be subjected to 20 discharges. The interval
between successive discharges should be 5s. The UAC should
be maintained for 2min after the last discharge.
F
S1
Tr
S2
L1
C1
UAC
R
L2
C2
C3
L3
Cx
Ct
Ut
L4
Oscilloscope
16 Active Flammability
The cheesecloth should not catch on fire.
C3
: 0.033μF±5% 10kV
C1,2 : 1μF±10%
L1 to 4 : 1.5mH±20% 16A Rod core choke
: 3μF±5% 10kV
R
: 100Ω±2%
Ct
: Capacitor under test
UAC
: UR±5%
Cx
: Rated Voltage
F
: Fuse, Rated 10A
UR
: Voltage applied to Ct
Ut
Ux
5kV
time
Test Specimen
45°
200±5mm
The burning time should not exceed 30s.
The tissue paper should not ignite.
About 8mm
17 Passive Flammability
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
30s.
Length of flame : 12±1mm
Gas burner
: Length 35mm min.
Inside Dia.
0.5±0.1mm
Outside Dia. 0.9mm max.
Gas
: Butane gas Purity 95% min.
Tissue
About 10mm Thick Board
18
9
Temperature
Cycle
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±20%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Dielectric
Strength
Per Item 6
The capacitor should be subjected to 1000 temperature cycles.
Step
1
2
3
4
Temperature (ºC)
Time (min.)
-55+0/-3
30
Room temp.
3
125+3/-0
30
Room temp.
3
Cycle time: 1000 cycles
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
Continued on the following page.
62
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Type KJ Specifications and Test Methods
Continued from the preceding page.
Item
High
Temperature
19
Exposure
(Storage)
20
Thermal
Shock
Resistance to
21
Solvents
Biased
22 Humidity
23
Capacitance
Change
D.F.
Specifications
Set the capacitor for 1000±12h at 150±3°C.
Within ±20%
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
1000MΩ min.
Appearance
No marked defect except color change of outer
coating.
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±20%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±20%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±15%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
I.R.
3000MΩ min.
Appearance
No marked defect
Capacitance
Change
Char.
B
E
Capacitance Change
Within ±10%
Within ±20%
D.F.
Char.
B, E
Specifications
D.F.<
=5.0%
Moisture
Resistance
I.R.
3000MΩ min.
Test Method
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
The capacitor should be subjected to 300 cycles.
Step
1
2
Temperature (ºC)
-55+0/-3
125+3/-0
Time (min.)
15±3
15±3
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
Per MIL-STD-202 Method 215
Solvent 1: 1 part (by volume) of isopropyl alcohol
3 parts (by volume) of mineral spirits
Solvent 2: Terpene defluxer
Solvent 3: 42 parts (by volume) of water
1 part (by volume) of propylene glycol
monomethyl ether
1 part (by volume) of monoethanolomine
Apply the rated voltage and DC1.3+0.2/-0V (add 6.8kΩ
resistor) at 85±3°C and 80 to 85% humidity for 1000±12h.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition*.
Apply 24h of heat (25 to 65°C) and humidity (80 to 98%)
treatment shown below, 10 consecutive times.
Pre-treatment:
Capacitor should be stored at 125±3°C for 1h, then placed at
room condition* for 24±2h.
Post-treatment:
Capacitor should be stored for 24±2h at room condition* .
°C
70
65
60
55
50
45
40
35
30
25
20
15
10
5
0
-5
-10
Humidity Humidity Humidity Humidity
90-98% 80-98% 90-98% 80-98%
Temperature
No.
Humidity
90-98%
+10
-2 °C
Initial measurement
One cycle 24 hours
0 1 2 3 4 5 6 7 8 9 101112131415161718192021222324
Hours
* "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmosphere pressure: 86 to 106kPa
9
63
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Characteristics Data (Typical Example)
Capacitance - Temperature Characteristics
Insertion Loss - Frequency Characteristics
40
0
20
10
Insertion Loss (dB)
Cap. Change (%)
0
B
B
-20
-40
E
-60
E
20
(3)
30
(2)
(1)
(4)
(5)
40
(6)
-80
-100
-40
-20
0
20
40
60
80
Temperature (°C)
100
120
50
140
1
10
100
1000
Frequency (MHz)
Type KJ
Signal power: 1mW
(1) 100pF
(2) 220pF
(3) 470pF
(4) 1000pF
(5) 2200pF
(6) 4700pF
Leakage Current Characteristics
Type KJ (B char.)
Type KJ (E char.)
AC voltage : 60Hz
Temperature: 25°C
AC voltage : 60Hz
Temperature: 25°C
1.0
4.0
0.6
220pF
0.4
0.2
0.0
64
470pF
0.8
100pF
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
Leakage current [mA(r.m.s.)]
Leakage current [mA(r.m.s.)]
4700pF
3.0
2.0
2200pF
1.0
0.0
1000pF
0
1000
2000
AC voltage [V(r.m.s.)]
3000
4000
C85E.pdf
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Sep.14,2018
Packaging
Taping Specifications
15mm pitch / lead spacing 7.5mm taping
Vertical crimp type
(Lead Code: N3)
ΔS
D
P
Δh1 O
Δh2
ød
L
F
T max.
Marked side
*
W
P1
W0 W2
H0
W1
e
P2
*
3.0 max.
øD0
P0
H0
t2
Item
t1
Code
N3
Pitch of component
P
15.0±2.0
Pitch of sprocket hole
P0
15.0±0.3
Lead spacing
F
7.5±1.0
Length from hole center to component center
P2
7.5±1.5
Length from hole center to lead
P1
3.75±1.0
Body diameter
D
See the individual product specifications.
Deviation along tape, left or right
ΔS
0±2.0
Carrier tape width
W
18.0±0.5
Position of sprocket hole
W1
9.0±0.5
Lead distance between reference and bottom planes
H0
18.0+2.0
–0
Protrusion length
+0.5 to -1.0
Diameter of sprocket hole
øD0
4.0±0.1
Lead diameter
ød
0.6±0.05
Total tape thickness
t1
0.6±0.3
Total thickness, tape and lead wire
t2
1.5 max.
Body thickness
T
7.0 max.
Portion to cut in case of defect
L
11.0+0
–1.0
Hold down tape width
W0
11.5 min.
Hold down tape position
W2
1.5±1.5
e
Up to the end of crimp
Coating extension on lead
Deviation across tape, front
Δh1
Deviation across tape, rear
Δh2
2.0 max.
(in mm)
Packaging Styles
Minimum Quantity (Order in Sets Only)
Bulk
Polyethylene Bag
Taping
[Bulk]
(pcs./Bag)
Ammo Pack
Lead Code
A3
Lead Code
B3
Long
Short
7 to 10
250
500
12
200
250
Body Dia. D
(mm)
[Taping]
Lead Code: N3
700pcs./Ammo Pack
65
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
!Caution
!Caution (Rating)
1. Operating Voltage
When DC-rated capacitors are to be used in AC or ripple
current circuits, be sure to maintain the Vp-p value of the
applied voltage or the Vo-p that contains DC bias within
the rated voltage range.
When the voltage is applied to the circuit, starting or
stopping may generate irregular voltage for a transit
period because of resonance or switching. Be sure to use
a capacitor with a rated voltage range that includes
these irregular voltages.
Voltage
Positional
Measurement
DC Voltage
V0-p
DC+AC Voltage
V0-p
AC Voltage
Vp-p
Pulse Voltage (1)
Vp-p
Pulse Voltage (2)
Vp-p
2. Operating Temperature and Self-generated Heat
Keep the surface temperature of a capacitor below the
upper limit of its rated operating temperature range. Be
sure to take into account the heat generated by the
capacitor itself. When the capacitor is used in a highfrequency current, pulse current or similar current, it may
have self-generated heat due to dielectric loss. Applied
voltage load should be such that self-generated heat is
within 20°C under the condition where the capacitor is
subjected to an atmospheric temperature of 25°C. When
measuring, use a thermocouple of small thermal
capacity-K of ø0.1mm under conditions where the
capacitor is not affected by radiant heat from other
components or wind from surroundings. Excessive heat
may lead to deterioration of the capacitor's
characteristics and reliability. (Never attempt to perform
measurement with the cooling fan running. Otherwise,
accurate measurement cannot be ensured.)
3. Test Condition for Withstanding Voltage
(1) Test Equipment
Test equipment for AC withstanding voltage should be
used with the performance of the wave similar to
50/60Hz sine wave.
If the distorted sine wave or overload exceeding the
specified voltage value is applied, a defect may be
caused.
Continued on the following page.
66
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
!Caution
Continued from the preceding page.
(2) Voltage Applied Method
When the withstanding voltage is applied, the capacitor's
lead or terminal should be firmly connected to the output
of the withstanding voltage test equipment, and then the
voltage should be raised from near zero to the test
voltage.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, test
voltage should be applied with the zero cross.* At the
end of the test time, the test voltage should be reduced
to near zero, and then capacitor's lead or terminal should
be taken off the output of the withstanding voltage test
equipment.
If the test voltage without the raise from near zero
voltage would be applied directly to capacitor, the surge
voltage may rise, and therefore, a defect may be caused.
Voltage sine wave
0V
zero cross
*ZERO CROSS is the point where voltage sine wave
passes 0V. See the figure at right.
4. Fail-Safe
When the capacitor is broken, failure may result in a
short circuit. Be sure to provide an appropriate fail-safe
function like a fuse on your product if failure could result
in an electric shock, fire or fuming.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
67
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Caution
!Caution (Storage and Operating Condition)
Operating and Storage Environment
The insulating coating of capacitors does not form a
perfect seal; therefore, do not use or store
capacitors in a corrosive atmosphere, especially
where chloride gas, sulfide gas, acid, alkali, salt
or the like are present. Also, avoid exposure to
moisture. Before cleaning, bonding, or molding this
product, verify that these processes do not affect
product quality by testing the performance of a
cleaned, bonded or molded product in the intended
equipment. Store the capacitors where the
temperature and relative humidity do not exceed -10
to 40 degrees centigrade and 15 to 85%.
Use capacitors within 6 months after delivery.
Check the solderability after 6 months or more.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
!Caution (Soldering and Mounting)
1. Vibration and Impact
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
Please confirm there is no influence of holding
measures on the product with the intended equipment.
2. Soldering
When soldering this product to a PCB/PWB, do not
exceed the solder heat resistance specifications of
the capacitor. Subjecting this product to excessive
heating could melt the internal junction solder and
may result in thermal shocks that can crack the
ceramic element.
Soldering the capacitor with a soldering iron should
be performed in the following conditions.
Temperature of iron-tip: 400 degrees C. max.
Soldering iron wattage: 50W max.
Soldering time: 3.5 sec. max.
3. Bonding, Resin Molding and Coating
For bonding, molding or coating this product, verify
that these processes do not affect the quality of the
capacitor by testing the performance of the bonded,
molded or coated product in the intended equipment.
When the amount of applications, dryness/hardening
conditions of adhesives and molding resins containing
organic solvents (ethyl acetate, methyl ethyl ketone,
toluene, etc). are unsuitable, the outer coating resin
of a capacitor is damaged by the organic solvents and
it may result, worst case, in a short circuit.
The variation in thickness of adhesive, molding resin
or coating may cause outer coating resin cracking
and/or ceramic element cracking of a capacitor in a
temperature cycling.
4. Treatment after Bonding, Resin Molding and Coating
When the outer coating is hot (over 100 degrees C.)
after soldering, it becomes soft and fragile.
Therefore, please be careful not to give it mechanical
stress.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
!Caution (Handling)
Vibration and Impact
Do not expose a capacitor or its lead wires to
excessive shock or vibration during use.
Excessive shock or vibration may cause fatigue
destruction of lead wires mounted on the circuit
board.
Please take measures to hold a capacitor on the
circuit boards by adhesive, molding resin or another
coating.
68
Please confirm there is no influence of holding
measures on the product with the intended equipment.
FAILURE TO FOLLOW THE ABOVE CAUTIONS MAY
RESULT, WORST CASE, IN A SHORT CIRCUIT
AND CAUSE FUMING OR PARTIAL DISPERSION
WHEN THE PRODUCT IS USED.
C85E.pdf
Sep.14,2018
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Notice
Notice (Soldering and Mounting)
Cleaning (ultrasonic cleaning)
To perform ultrasonic cleaning, observe the following
conditions.
Rinse bath capacity: Output of 20 watts per liter or less.
Rinsing time: 5min maximum.
Do not vibrate the PCB/PWB directly.
Excessive ultrasonic cleaning may lead to fatigue
destruction of the lead wires.
Notice (Rating)
1. Capacitance Change of Capacitors
Capacitors have an aging characteristic, whereby
the capacitor continually decreases its
capacitance slightly if the capacitor is left on
for a long time. Moreover, capacitance might
change greatly depending on the surrounding
temperature or an applied voltage. Therefore,
it is not likely to be suitable for use in a constant
time circuit.
Please contact us if you need detailed information.
2. Performance Check by Equipment
Before using a capacitor, check that there is no
problem in the equipment's performance and the
specifications.
Generally speaking, CLASS 2 ceramic capacitors
have voltage dependence characteristics and
temperature dependence characteristics in
capacitance. Therefore, the capacitance value may
change depending on the operating condition in the
equipment. Therefore, be sure to confirm the
apparatus performance of receiving influence in
the capacitance value change of a capacitor,
such as leakage current and noise suppression
characteristic.
Moreover, check the surge-proof ability of a
capacitor in the equipment, if needed, because the
surge voltage may exceed specific value by the
inductance of the circuit.
69
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
C85E.pdf
Sep.14,2018
Lead Type Disc Ceramic Capacitors (Safety Certified)/
Resin Molding SMD Type Ceramic Capacitors (Safety Certified) ISO9000 Certifications
Manufacturing plants that produce the products in this
catalog have obtained the ISO9000 quality system certificate.
Plant
Murata Electronics (Thailand), Ltd.
70
Applied Standard
ISO9001
C85E.pdf
Sep.14,2018
Cat. No. C85E-7
Global Locations
For details please visit www.murata.com
Note
1 Export Control
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
1
Aircraft equipment
2
Aerospace equipment
3
Undersea equipment
4
Power plant equipment
5
Medical equipment
6
Transportation equipment (vehicles, trains,
ships, etc.)
7
Traffic signal equipment
8
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10
Application of similar complexity and/or
reliability requirements to the applications
listed above
Murata Manufacturing Co., Ltd.
www.murata.com
3 Product specifications in this catalog are as of
August 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
工商网监
湘ICP备2023018690号
