HL01R05S05YC

1 WATT REGULATED DC/DC CONVERTER HL01RYC FEATURES LOW COST NON-CONDUCTIVE CASE INTERNAL INPUT AND OUTPUT FILTERING SHORT CIRCUIT PROTECTED BUILT- IN STANDOFFS INDUSTRY STANDARD PINOUT ROHS COMPLIANT DESCRIPTION The HL01RYC Series uses advanced circuit design and packaging technology to realize superior reliability and performance. A 125kHz push-pull oscillator is used in the input stage. Beat-frequency oscillator problems are reduced when using the HL01RYC Series with high frequency isolation amplifiers. Reduced parts count and all surface mount construction add to the reliability of the HL01RYC Series. The use of surface mount devices and magnetics eliminate hand soldering operations. This "hands-free" construction increases quality and reliability while keeping cost low. ABSOLUTE MAXIMUM RATINGS Internal Power Dissipation.......................................................1.2W Short Circuit Duration....................................................Continuous Lead Temperature (soldering, 10 seconds max)................+300°C ORDERING INFORMATION * *Note: Refer to Reflow Profile for SMD Models. HL01R xxyzz Y Device Family HL Indicates DC/DC Converter Model Number Where: xx = Input Voltage y = Number or Outputs (Single "S", Dual "D") zz = Output Voltage Package Option RoHS Compliant C TYPICAL PERFORMANCE CURVES Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. EFFICIENCY vs LOAD 60% 50% Efficiency (%) 40% 30% 20% 10% 0% 0% 25% 50% Load (mA) 75% 100% 　 For full details go to www.murata-ps.com/rohs www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 HL01RYC.B01 Page 1 of 3 ELECTRICAL SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. NOMINAL INPUT VOLTAGE MODEL HL01R05S05YC HL01R05S12YC HL01R05S15YC HL01R12S05YC HL01R12S12YC HL01R12S15YC HL01R15S05YC HL01R15S12YC HL01R15S15YC HL01R24S05YC HL01R24S12YC HL01R24S15YC HL01R05D05YC HL01R05D12YC HL01R05D15YC HL01R12D05YC HL01R12D12YC HL01R12D15YC HL01R15D05YC HL01R15D12YC HL01R15D15YC HL01R24D05YC HL01R24D12YC HL01R24D15YC (VDC) 5 5 5 12 12 12 15 15 15 24 24 24 5 5 5 12 12 12 15 15 15 24 24 24 RATED OUTPUT VOLTAGE (VDC) 5 12 15 5 12 15 5 12 15 5 12 15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 ±5 ±12 ±15 RATED OUTPUT CURRENT (mA) 200 83 67 200 83 67 200 83 67 200 83 67 ±100 ±41 ±33 ±100 ±41 ±33 ±100 ±41 ±33 ±100 ±41 ±33 INPUT CURRENT MIN LOAD (mA) 50 50 50 40 40 40 30 30 30 20 20 20 50 50 50 40 40 40 30 30 30 20 20 20 RATED LOAD (mA) 400 400 400 160 160 160 130 130 130 80 80 80 425 400 400 185 160 160 145 130 130 90 80 80 1 WATT REGULATED DC/DC CONVERTER HL01RYC EFFICIENCY (%) 58 52 52 58 52 52 58 52 52 58 52 52 45 53 53 45 53 53 45 53 53 45 53 53 Note: Other input to output voltages may be available. Please contact factory. COMMON SPECIFICATIONS Specifications typical at TA = +25°C, nominal input voltage, rated output current unless otherwise specified. PARAMETER INPUT Voltage Range CONDITIONS MIN 4.75 11.4 14.25 22.8 TYP 5 12 15 24 30 MAX 5.25 12.6 15.75 25.2 100 UNITS VDC VDC VDC VDC mAp-p Reflected Ripple Current ISOLATION Rated Voltage Test Voltage Resistance Capacitance Leakage Current OUTPUT Rated Power Voltage Setpoint Accuracy Temperature Coefficent Ripple & Noise Line Regulation Load Regulation GENERAL Switching Frequency Package Weight MTTF per MIL-HDBK-217, Rev. F Ground Benign Moisture Sensitivity Level (MSL) TEMPERATURE Specification Operation Storage 60 Hz, 10 Seconds 500 500 1 25 2 VISO= 240VAC, 60Hz 10 VDC Vpk GΩ pF μArms BW = DC to 10MHz BW =10Hz to 2MHz High Line to Low Line Rated Load to No Load 1 ±3 ±0.01 30 1 ±0.1 ±0.5 125 10 ±5 ±0.02 100 10 ±1 ±1 W % %/°C mVp-p mVrms % % kHz g kHr Circuit Stress Method IPC/JEDEC J-STD-20 675 2 -25 -40 -40 +70 +85 +110 °C °C °C www.murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 HL01RYC.B01 Page 2 of 3 MECHANICAL Package/Pinout "Y" 1 WATT REGULATED DC/DC CONVERTER HL01RYC NU = Do Not Use. NC = No Internal Connection. Duplicate pin functions are internally connected. All dimensions are in inches (millimeters). GRID: 0.100 inches (2.54 millimeters) Typically Marked with: specific model ordered, date code, job code and Logo. Pin base metal is phosphor bronze. Pin finish is matte tin (100-300 microinches) over a nickel barrel layer (5-40 microinches). DIP PACKAGE PIN CONNECTIONS PIN# 1 2 3 10 11 12 13 14 15 22 23 24 SINGLES +VIN NU NU -VOUT +VOUT -VIN -VIN +VOUT -VOUT NU NU +VIN DUALS +VIN -VOUT Common Common +VOUT -VIN -VIN +VOUT Common Common -VOUT +VIN THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. USA: Canada: UK: France: Germany: Japan: China: Singapore: Mansfield (MA), Tel: (508) 339-3000, email: sales@murata-ps.com Toronto, Tel: (866) 740-1232, email: toronto@murata-ps.com Milton Keynes, Tel: +44 (0)1908 615232, email: mk@murata-ps.com Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: france@murata-ps.com München, Tel: +49 (0)89-544334-0, email: munich@murata-ps.com Tokyo, Tel: 3-3779-1031, email: sales_tokyo@murata-ps.com Osaka, Tel: 6-6354-2025, email: sales_osaka@murata-ps.com Shanghai, Tel: +86 215 027 3678, email: shanghai@murata-ps.com Guangzhou, Tel: +86 208 221 8066, email: guangzhou@murata-ps.com Parkway Centre, Tel: +65 6348 9096, email: singapore@murata-ps.com Technical enquiries email: sales@murata-ps.com, tel: +1 508 339 3000 Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 www.murata-ps.com email: sales@murata-ps.com ISO 9001 REGISTERED 10/10/08 Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2008 Murata Power Solutions, Inc. www.murata-ps.com HL01RYC.B01 Page 3 of 3