UHF RFID Tag Data sheet
LXTBKZMCMG-010
Scope
This Data sheet, is applied to passive UHF tag.
-Specific applications: To give ID (identification) to consumer product, consumer equipment, industrial
equipment and medical equipment (GHTF Class A and B) or its consumables for individual management by
using radio waves.
-Unsuitable Application: Applications listed in “Limitation of applications” in this Data sheet.
1. General Descriptions
LXTBKZMCMG-010 is an innovative RFID module which
complies EPC global Gen2 (v2).
This product can be used as an ultra small tag and this can be
fit on any metal objects.
This can be used globally with high performance and reliability.
[Features]
- Small package design
-UHF band (865~928MHz)
-ISO18000-63 / EPC Global Gen2(v2) Compliant
-Size is 6.0 x 2.0 x 2.3mm
-Using Impinj MonzaR6P
-Read range: Up to 150cm on metal (4WEIRP) *Reference
-RoHS compliant
2,
Block Diagram
Antenna
Analog F/E
Controller
Integrated Circuit
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
1
Rev1.1 October, 2022
Memory
UHF RFID Tag Data sheet
LXTBKZMCMG-010
3, Mechanical Information
[Dimension]
L
T
W
T
Unit:mm
Mark
Dimensions
L
6.0±0.20
W
2.0±0.20
T
2.3 Max
4. Electrical Performance
4-1. Frequency range
865-928MHz
4-2. IC / Memory size
Parameter
Description
IC
Impinj Monza R6P
ISO/IEC 18000-63
Protocol
EPC global Gen2 V2
EPC
Default Memory Profile:128 bit
Max User Memory Profile:96bit
TID
Memory *1
96 bit
Reserved
User
Read & Write
Read Only
64 bit
memory
Default Memory Profile:32 bit
Max User Memory Profile:64bit
Data retention Time
50years *
*Reference value
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
2
Rev1.1 October, 2022
Remarks
Tamb = 22℃
UHF RFID Tag Data sheet
LXTBKZMCMG-010
5. Reading range (reference only)
Read range varies depending on use case and hardware.
UHF band(865~928MHz):Up to 150cm on metal (4WEIRP)
6. Absolute maximum ratings
Symbol
Parameter
Min
Max
Unit
Tstg
Storage temperature
-40
+85
℃
Tamb
Operating temperature
-40
+85
℃
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
3
Rev1.1 October, 2022
UHF RFID Tag Data sheet
LXTBKZMCMG-010
7. Packaging
7-1. Dimensions of tape
Unit: mm
Symbol
A
B
C
D
E
F
Dimension
2.6±0.1
6.6±0.1
16.0 +0.2
7.5±0.1
1.75±0.1
8.0±0.1
Symbol
G
H
J
K
t
Dimension
2.0±0.1
4.0±0.1
1.5 +0.1-0
2.35±0.05
0.30±0.05
7-2. Dimensions of reel
a
d
b
c
Unit: mm
Symbol
a
b
c
d
e
Dimension
2.0+/-0.5
Φ13.0+/-0.2
17.4+/-1.0
(Φ100)
(Φ330)
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
4
Rev1.1 October, 2022
e
UHF RFID Tag Data sheet
LXTBKZMCMG-010
7-3. Taping Diagrams
[1] Feeding Hole :
As specified in 7-1
[2] Hole for chip
:
As specified in 7-1
[3] Cover tape
:
50um in thickness
[4] Base tape
:
As specified in 7-1
Feeding Hole
Feeding Direction
Package chips
Tag
7-4. Leader and Tail tape
A
B
Components
C
Unit:mm
Symbol
Item
A
Tail
160
B
Leader no components
100
C
Leader with cover tape
400
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
5
Rev1.1 October, 2022
Minimum length
UHF RFID Tag Data sheet
LXTBKZMCMG-010
7-5. Taping direction
The tape for chips are wound clockwise.
The feeding holes will come on the right side when the tape is pulled to a user’s direction.
7-6. Quantity per reel
2,000 pcs
7-7. Minimum order quantity
2,000pcs
7-8. Material
Base and Cover tape : Plastic
Reel : Plastic
Base and Cover tape, Reel have an anti-ESD function.
7-9. Peeling strength
0.1-1.3N when peeled in the direction below.
0.7
N max.
0.1~1.3
N
165 ~ 180 °
Cover tape
Base tape
8. Contact window
URL: http://www.murata.com/products/rfid
Email: magicstrap@murata.com
For any inquiries/queries, please feel free to contact us.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
6
Rev1.1 October, 2022
UHF RFID Tag Data sheet
LXTBKZMCMG-010
NOTICE
1. Storage Conditions:
To avoid damaging, be sure to observe the following points.
- Store products where the ambient temperature is 15 to 35 °C and humidity 45 to 75% RH.
(Packing materials, In particular, may be deformed at the temperature over 40 °C.).
- Store products in non corrosive gas (Cl2, NH3,SO2, Nox, etc.).
- Stored products should be used within 6 months of receipt.
2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock may break
products.
3. Operational Environment Conditions:
Products are designed to work under normal environmental conditions (ambient temperature, humidity and
pressure). Therefore, products have no problems to be used under the similar conditions to the
above-mentioned. However, if products are used under the following circumstances, it may damage products
and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).F
- In an atmosphere containing combustible and volatile gases.
- In a dusty environment.
- Direct sunlight
- Water splashing place.
- Humid place where water condenses.
- In a freezing environment.
If there are possibilities for products to be used under the preceding clause, consult with Murata before actual
use.
If static electricity is added to this product, degradation and destruction may be produced.
Please use it after consideration enough so that neither static electricity nor excess voltage is added at the
time of an assembly and measurement.
If product malfunctions may result in serious damage, including that to human life, alternative measures of the
operation and design must be taken to secure the safety.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
7
Rev1.1 October, 2022
UHF RFID Tag Data sheet
LXTBKZMCMG-010
4. Cleaning Conditions:
If the cleaning will be applied, please check with Murata in advance since the product may degrade or get
broken.
5. Limitation of Applications:
The products listed in the Data sheet (hereinafter the product(s) is called as the “Product(s)”) are designed and
manufactured for applications specified in the Data sheet. (hereinafter called as the “Specific Application”).
We shall not warrant anything in connection with the Products including fitness, performance, adequateness,
safety, or quality, in the case of applications listed in from (1) to (11) written at the end of this precautions,
which may generally require high performance, function, quality, management of production or safety.
Therefore, the Product shall be applied in compliance with the specific application.
WE DISCLAIM ANY LOSS AND DAMAGES ARISING FROM OR IN CONNECTION WITH THE PRODUCTS
INCLUDING BUT NOT LIMITED TO THE CASE SUCH LOSS AND DAMAGES CAUSED BY THE
UNEXPECTED ACCIDENT, IN EVENT THAT (i) THE PRODUCT IS APPLIED FOR THE PURPOSE WHICH
IS NOT SPECIFIED AS THE SPECIFIC APPLICATION FOR THE PRODUCT, AND/OR (ii) THE PRODUCT IS
APPLIED FOR ANY FOLLOWING APPLICATION PURPOSES FROM (1) TO (11) (EXCEPT THAT SUCH
APPLICATION PURPOSE IS UNAMBIGUOUSLY SPECIFIED AS SPECIFIC APPLICATION FOR THE
PRODUCT IN OUR CATALOG
SPECIFICATION FORMS, DATASHEETS, OR OTHER DOCUMENTS
OFFICIALLY ISSUED BY US*).
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Power plant control equipment
(5) Medical equipment
(6) Transportation equipment
(7) Traffic control equipment
(8) Disaster prevention/security equipment
(9) Industrial data-processing equipment
(10) Combustion/explosion control equipment
(11) Equipment with complexity and/or required reliability equivalent to the applications listed in the above.
For exploring information of the Products which will be compatible with the particular purpose other than those
specified in the Data sheet, please contact our sales offices, distribution agents, or trading companies with
which you make a deal, or via our web contact form.
Contact form: https://www.murata.com/contactform
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
8
Rev1.1 October, 2022
UHF RFID Tag Data sheet
LXTBKZMCMG-010
*We may design and manufacture particular Products for applications listed in (1) to (11). Provided that, in
such case we shall unambiguously specify such Specific Application in the Data sheet without any exception.
Therefore, any other documents and/or performances, whether exist or non-exist, shall not be deemed as the
evidence to imply that we accept the applications listed in (1) to (11).
!
Note:
Please make sure that your product has been evaluated and confirmed against your specifications when our
product is attached to your product.
All the items and parameters in this product specification have been prescribed on the premise that our
product is used for the purpose, under the condition and in the environment agreed upon between you and us.
You are requested not to use our product deviating from such agreement.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
< Specification is subject to change without notice >
9
Rev1.1 October, 2022