ELL-8TP3R3NB

Power Inductors Power Inductors / Wire Wound type Series : P Type : ELL8TP Features ● Magnetic shielded structure DC resistance and large current capability ● Available on tape and reel for automatic insertion ● RoHS compliant ● Low Recommended Applications ● Audiovisual equipment, Appliance, Office automation equipment, Amusement machine, Power circuit for electric device Standard Packing Quantity ● 500 pcs./reel ■ As for Soldering Conditions and Safety Precautions, Please see Data Files Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 E L L 8 T P 2 2 0 M B Product Code Outer size Height Structure ELL Choke Coil (Magnetic shielded type ) T 5.0 max. Dimensions in mm (not to scale) Inductance P Tolerance Design No. 4R7 → 4.7 µH 101 → 100 µH Series M → ±20 % N → ±30 % Recommended land patterns in mm (not to scale) 2. 5± 0. 5 9. 9 6. 6 8.0±0.5 Marking Date code 4. 3. 7± 8.0±0.5 0 0. 3 5) .8 (0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Oct. 2014 Power Inductors Standard Parts Part No. ELL8TPR80NB ELL8TP1R2NB ELL8TP2R5NB ELL8TP3R3NB ELL8TP4R7NB ELL8TP6R8NB ELL8TP100MB ELL8TP150MB ELL8TP220MB ELL8TP330MB ELL8TP470MB ELL8TP680MB ELL8TP101MB ELL8TP151MB ELL8TP221MB ELL8TP331MB ELL8TP471MB ELL8TP681MB ELL8TP102MB Inductance (100 kHz) (µH) 0.8 1.2 2.5 3.3 4.7 6.8 10.0 15.0 22.0 33.0 47.0 68.0 100.0 150.0 220.0 330.0 470.0 680.0 1000.0 RDC (at 20 °C) Tol. ±30 % ±20 % (mΩ) 3.6 4.7 7 13 14 18 25 44 55 84 100 140 190 340 480 700 1000 1300 2100 Saturation Temperature Rated Current✽1 Rise Current✽2 (mA max.) (mA max.) Tol. ±30 % 9500 8500 ±20 % 5500 5000 4000 3500 3000 2300 2200 1600 1400 1000 900 700 550 450 400 300 250 9000 8000 6500 4200 4000 3500 3000 2300 2000 1600 1500 1300 1100 800 700 570 480 430 330 Marking R80 1R2 2R5 3R3 4R7 6R8 100 150 220 330 470 680 101 151 221 331 471 681 102 ✽1 Saturation Rated Current : This DC current which causes a 30% inductance reduction from its nominal value. ✽2 Temperature Rise Current : This indicates the value of current when temperature rise dt/t= 40 °C (at 20 °C). 5. 2± 0. 2 Embossed Carrier Tape Dimensions in mm (not to scale) 0.4 n io ct 0± 0. 1.75±0.30 05 , Se B B- R0.5 max. 8 °m ax 11.5±0.3 24.0±0.5 . n R0.5 max. AA , Se ct io 8 °m ax . 8 .6 ±0 . 3 B’ A B A’ f1 7 0.0 ± .50 3 0. 6± 4.0±0.3 8. 2.0±0.3 16.0±0.3 Tape running direction Quantity 500 pcs./reel Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Oct. 2014 Power Inductors Safety Precautions (Common precautions for Power Inductors / Wire Wound type) • When using our products, no matter what sort of equipment they might be used for, be sure to make a written agreement on the specifications with us in advance. The design and specifications in this catalog are subject to change without prior notice. • Do not use the products beyond the specifications described in this catalog. • This catalog explains the quality and performance of the products as individual components. Before use, check and evaluate their operations when installed in your products. • Install the following systems for a failsafe design to ensure safety if these products are to be used in equipment where a defect in these products may cause the loss of human life or other significant damage, such as damage to vehicles (automobile, train, vessel), traffic lights, medical equipment, aerospace equipment, electric heating appliances, combustion/gas equipment, rotating equipment, and disaster/crime prevention equipment. ✽ Systems equipped with a protection circuit and a protection device ✽ Systems equipped with a redundant circuit or other system to prevent an unsafe status in the event of a single fault Precautions for use 1. Operation range and environments 1 These products are designed and manufactured for general and stan dard use in general elec tron ic equipment (e.g. AV equipment, home electric appliances, office equipment, information and communication equipment) 2 These products are not intended for use in the following special conditions. Before using the products, carefully check the effects on their quality and performance, and determine whether or not they can be used. • In liquid, such as water, oil, chemicals, or organic solvent • In direct sunlight, outdoors, or in dust • In salty air or air with a high concentration of corrosive gas, such as Cl2, H2S, NH3, SO2, or NO2 • In an environment where these products cause dew condensation 2. Handling 1 Do not bring magnets or magnetized materials close to the product. The influence of their magnetic field can change the inductance value. 2 Do not apply strong mechanical shocks by either dropping or collision with other parts. Excessive shock can damage the part. 3. Washing of board Kindly consult the Technical department before washing of the PWB with any cleansing agent, and provide the washing condition. 4. Resoldering with a soldering iron The temperature of the tip of the soldering iron should be 360 °C or less, 4 seconds. And resoldering with a soldering iron should be limited to 1 time, and after that should be cooling these. 5. Mounting side External force must be less than 5.0 [N] : while mounting. 6. Storage conditions Normal temperature (–5 to 35 °C), normal humidity (85 % RH max.), shall not be exposed to direct sunlight and harmful gases and care should be taken so as not to cause dew. Package markings include the product number, quantity, and country of origin. In principle, the country of origin should be indicated in English. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 Sep. 2014