LMX4168FLQ

LMX4168 Radio Transceiver for DECT ADVANCED INFORMATION March 2004 LMX4168 Radio Transceiver for DECT 1.0 General description The LMX4168 is a radio transceiver integrated circuit optimized for the Digital Enhanced Cordless Telecommunications (DECT) system. The transceiver, when combined with a power amplifier and a Tx/Rx switch, implements a complete DECT radio transceiver compliant with the ETSI CTR6 standard. The LMX4168 interfaces to National Semiconductor’s SC144XX DECT family of baseband processors. The LMX4168 integrates a complete transmitter, consisting of a phase locked loop, VCO and PA driver. The receiver contains LNA, quadrature downconverter, polyphase filter/combiner, automatic gain control, and demodulator. The LMX4168 operates from a single 2.25–2.75V supply. The LMX4168 is manufactured in National’s 0.25µm CMOS technology, and is packaged in a 44 pin LLP package 2.0 Features ■ Highly integrated 1.9 GHz low-IF CMOS transceiver ■ Down conversion to half the DECT channel spacing (864 kHz) ■ On-chip channel select filter ■ On-chip Voltage Controlled Oscillator (VCO) ■ On-chip low noise amplifier (LNA) ■ Open-loop modulation ■ On-chip timing control ■ Four digital (5 mA) output ports ■ 0 dBm PA driver output ■ -95 dBm sensitivity ■ 2.5V operation ■ Small 44 pin Leadless Leadframe Package 3.0 Applications ■ (DECT) Digital Enhanced Cordless Telecommunications 4.0 System Diagram AGC DEMOD. DEMOD. BALUN LNA RSSI 0° 90° DATA MICROWIRE PA BALUN PADR X2 CLOCK LE RX_DATA PORTS PLL BIAS TXDATA R REF © 2004 National Semiconductor Corporation www.national.com LMX4168 5.0 Specifications 5.1 ABSOLUTE MAXIMUM RATINGS Table 1. Absolute Maximum Ratings1 Parameter Vdd_max Description Power supply voltage (Vdd_ADC, Vdd_IF, Vdd_mix, Vdd_LNA, Vdd_ESD, Vdd_PAdr, Vdd_presc, Vdd_PLL, Vdd_VCO, Vdd_shield, Vdd_bias, Vdd_dig, Vdd_RSSI) Absolute difference between power supplies Vn Pin TS TL VHBM VMM 1. Voltage on any pin Input power (at pins Rxin, RxinZ) Storage temperature Lead temperature (solder 4 sec) ESD - human body model2 ESD - machine model2 -65 -0.3 0.3 Vdd+0.3 +15 +150 + 260 2 250 V V dBm °C °C kV V Value Min -0.3 Typ Max 3.0 Unit V 2. Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only to the test conditions listed. MSL 2 (Moisture Sensitivity Level) is valid when the standard reflow process (235°C) is used. MSL 2 means 1 year shelf life after opening dry-pack. MSL 2(1 year shelf life) is also valid when the lead free reflow process (260°C) is used. Storage conditions are max. 30°C / 60% rel. humidity. 5.2 ELECTRICAL CHARACTERISTICS Table 2. Recommended Operating Conditions Parameter Vdd Description Power supply voltage (Vdd_ADC, Vdd_IF, Vdd_mix, Vdd_LNA, Vdd_ESD, Vdd_PAdr, Vdd_presc, Vdd_PLL, Vdd_VCO, Vdd_shield, Vdd_bias, Vdd_dig, Vdd_RSSI) VTXoutZ, VTXout TA Rref PA driver output biasing voltage @ pins 16 and 17 Operating temperature Reference resistor connected from pin 31 to Vss -10 60 62 2.0 +60 64 V °C kΩ Value Min 2.25 Typ 2.5 Max 2.75 Unit V www.national.com 2 LMX4168 6.0 Product Status Definitions Datasheet Status Advance Information Product Status Formative or in Design Definition This data sheet contains the design specifications for product development. Specifications may change in any manner without notice. This data sheet contains preliminary data. Supplementary data will be published at a later date. National Semiconductor Corporation reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. National Semiconductor Corporation reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains specifications on a product that has been discontinued by National Semiconductor Corporation. The datasheet is printed for reference information only. Preliminary First Production No Identification Noted Full production Obsolete Not in Production Revision 1.0 (Confidential) 3 LMX4168 Radio Transceiver for DECT 7.0 Package Information inches (millimeters) unless otherwise noted Order Number For Tray LMX4168FLQ, xx units per Tray, xx Trays per Shipment Box. Order Number For Tape/Reel LMX4168FLQx, xxxx units per Tape/Reel, 1 Reel per Shipment Box 44 pins Leadless Leadframe Package. NS Package Number LQA044AF Note: Note: MSL 2 (Moisture Sensitivity Level) is valid when the standard reflow process (235°C) is used. MSL 2 = 1 year after opening dry-pack. Storage conditions are max 30°C / 60% rel humidity. Refer to the application note AN-1187 for relevant soldering information. This document can be downloaded from http://www.national.com/an/AN/AN-1187.pdf LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no “Banned Substances” as defined in CSP-9-111S2. National Semiconductor Corporation Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. National Semiconductor Europe Fax: Deutsch Tel: English Tel: Francais Tel: +49 (0) 180-530 85 86 +49 (0) 69 9508 6208 +44 (0) 870 24 0 2171 +33 (0) 1 41 91 8790 Email: europe.support@nsc.com National Semiconductor Asia Pacific Customer Response Group Tel: 65-254-4466 Fax: 65-250-4466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507