NT2016SA

Crystal Oscillator n Main Application For mobile phones, etc. NEW Model Name NT2016SA Temperature-Compensated Crystal Oscillator with AFC Function (VC-TCXO) NT2016S Series n Features l Supports low power supply voltage. (Supports DC +2.4 V±0.1 V to 2.9 V±0.1 V.) l Ultra-compact and light with a height, cubic volume, and weight of Max. 0.8 mm, 0.0022 cm3, and 0.008 g, respectively. l With an AFC (Automatic Frequency Control) function. l Low power consumption. l A surface-mount crystal oscillator. (Reflow soldering is possible.) l Lead-free. Meets the requirements for re-flow profiling using lead-free solder. Pb Free n Specifications Model Item Standard nominal frequency (MHz) Supply voltage [VCC] (V) Load Current consumption (mA) Output voltage Frequency stability Operating temperature range (°C) Supply variation Load variation Aging AFC characteristic NT2016SA 13 to 26 +2.8 10 kΩ//10 pF Max. 1.5 Min. 0.8 V(P-P) (DC Coupling *1) Max. ±2.5×10–6 –30 to +75 Max. ±0.2×10–6/+2.8 V±5 % Max. ±0.2×10–6/(10 kΩ//10 pF) ±10 % Max. ±1.0×10–6/year ±9.0×10–6 to ±15.0×10–6/+1.4 V±1 V *2 • Frequency setting conditions 1. Frequencies are set at normal temperatures (+25±2 °C). 2. Frequencies are set with a printed board that has a ground pattern attached to the underside of an oscillator. • If you require a product with a different frequency, power supply voltage, frequency control characteristic, etc. to the standard specifications, please contact us with your enquiries. • Products with the AFC (Automatic Frequency Control) function are available. If you require such a product, please contact us. *1. A DC-cut capacitor is not embedded in this crystal oscillator. Connect a DC-cut capacitor (1,000 pF) to the line-out terminal of the oscillator. *2. This is a representative specification. The specifications may change according to the frequency that you request. n Dimensions mm 2.0 ± 0.1 #4 #3 1.6 ± 0.1 n List of Ordering Codes Frequency (MHz) 13 19.2 26 Ordering Code NT2016SA-13M-NSA3456A NT2016SA-19.2M-NSA3456A NT2016SA-26M-NSA3456A PAD No. #1 #2 #3 #4 Connection VCONT GND OUTPUT VCC #1 #2 The above frequencies are NDK’ s standard frequencies. Frequencies other than the above are available. Feel free to contact our sales representatives. Reference land pattern 0.7 ± 0.1 1.2 0.6 0.8 0.6 ± 0.1 0.4 ± 0.05 0.8 #3 #4 0.4 ± 0.1 0.4 1.2 ± 0.05 #1 #2 co09_080926_NT2016SA_e