G3VM-2FLTR

MOS FET Relays G3VM-2(F)L Analog-switching MOS FET Relays with 350-V Load Voltage and Current Limit. • A 4-pin Relay available with the same terminal-pin position as 4-pin photocouplers. • Approved standards: UL1577 (File No. E80555) • RoHS Compliant. ■ Application Examples • Electronic automatic exchange systems • Cordless telephones • Multi-functional telephones • Measurement devices Note: The actual product is marked differently from the image shown here. ■ List of Models Contact form SPST-NO Terminals PCB terminals Surface-mounting terminals Load voltage (peak value) 350 VAC Model G3VM-2L G3VM-2FL G3VM-2FL(TR) --1,500 Current limit Yes Number per stick 100 Number per tape --- ■ Dimensions Note: All units are in millimeters unless otherwise indicated. G3VM-2L 4.58±0.25 G3VM-2FL 4.58±0.25 6.4±0.25 7.62±0.25 6.4±0.25 7.62±0.25 3.65 −0.25 +0.15 0.8±0.25 3.65 −0.25 +0.15 0.25 −0.05 +0.1 Note: The actual product is marked differently from the image shown here. 2.5 min. 1.2±0.15 0.5±0.1 2.54±0.25 7.85 to 8.80 Weight: 0.26 g Note: The actual product is marked differently from the image shown here. 1.2±0.15 2.54±0.25 1.0 min. 10.0 max. 4.0 +0.25 −0.2 1.0 min. Weight: 0.26 g ■ Terminal Arrangement/Internal Connections (Top View) G3VM-2L 4 3 G3VM-2FL 4 3 1 2 1 2 ■ PCB Dimensions (Bottom View) G3VM-2L 2.54 2.54 Four 0.8-dia. holes (0.56) ■ Actual Mounting Pad Dimensions (Recommended Value, Top View) G3VM-2FL 8.3 to 8.8 2.54 (0.1) (0.56) (0.1) 1.3 1.5 MOS FET Relays G3VM-2(F)L 31 ■ Absolute Maximum Ratings (Ta = 25°C) Item LED forward current Repetitive peak LED forward current Input Symbol IF IFP 50 1 −0.5 6 125 350 120 125 2,500 −40 to +85 260 Rating Unit mA A mA/°C V °C V mA mA/°C °C Vrms °C °C AC for 1 min With no icing or condensation With no icing or condensation 10 s Ta ≥ 25°C 100 μs pulses, 100 pps Ta ≥ 25°C Measurement conditions Note: 1. The dielectric strength between the input and output was checked by applying voltage between all pins as a group on the LED side and all pins as a group on the light-receiving side. LED forward current reduction Δ IF/°C rate LED reverse voltage Connection temperature Load voltage (AC peak/DC) Continuous load current ON current reduction rate Connection temperature VR Tj VOFF IO Tj VI-O Ta Tstg --- Output Δ ION/°C −1.2 Dielectric strength between input and output (See note 1.) Operating temperature Storage temperature Soldering temperature (10 s) −55 to +125 °C ■ Electrical Characteristics (Ta = 25°C) Item Input LED forward voltage Reverse current Capacity between terminals Trigger LED forward current Output Maximum resistance with output ON Symbol VF IR CT IFT RON Minimum 1.0 ------------150 --1,000 ----Typical 1.15 --30 1 22 0.0005 40 --0.8 --0.25 0.15 Maximum 1.3 10 --3 35 1.0 --300 ----1.0 1.0 Unit V μA pF mA Ω μA pF mA pF MΩ ms ms Measurement conditions IF = 10 mA VR = 6 V V = 0, f = 1 MHz IO = 120 mA IF = 5 mA, IO = 120 mA VOFF = 350 V V = 0, f = 1MHz IF = 5 mA, VDD = 5 V, t = 5 ms f = 1 MHz, Vs = 0 V VI-O = 500 VDC, RoH ≤ 60% IF = 5 mA, RL = 200 Ω, VDD = 20 V (See note 2.) IF Note: 2. Turn-ON and Turn-OFF Times 1 2 4 Load 3 AC/DC IF 1 2 4 3 RL VDD VOUT Current leakage when the relay is open ILEAK Capacity between terminals Limit current Capacity between I/O terminals Insulation resistance Turn-ON time Turn-OFF time COFF ILIM CI-O RI-O tON tOFF VOUT 10% t ON 90% t OFF ■ Recommended Operating Conditions Use the G3VM under the following conditions so that the Relay will operate properly. Item Load voltage (AC peak/DC) Operating LED forward current Symbol VDD IF Minimum --5 --− 20 --7.5 ----Typical Maximum 280 25 100 65 V mA mA °C Unit Continuous load current (AC peak/DC) IO Operating temperature Ta 32 MOS FET Relays G3VM-2(F)L ■ Engineering Data LED forward current vs. Ambient temperature IF - Ta LED forward current IF (mA) Continuous load current I O (mA) 60 150 Continuous load current vs. Ambient temperature IO - Ta LED forward current I F (mA) 100 LED forward current vs. LED forward voltage IF - VF Ta = 25 120 40 10 90 60 20 1 30 0 -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 0.1 0 .6 0.8 1 1.2 1.4 1.6 1.8 Ambient temperature Ta ( ) Ambient temperature Ta LED forward voltage VF (V) Continuous load current vs. On-state voltage IO - VON Continuous load current IO (mA) On-state resistance RON (Ω) 150 120 90 60 30 0 -30 -60 -90 -120 -150 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 0 -40 25 On-state resistance vs. Ambient temperature RON - Ta Trigger LED forward current I F T (mA) I O = 120 mA I F = 5 mA t