AC Axial Fans
R87F/R87T
CSM_R87F_R87T_DS_E_8_6
Optimum Cooling with a Comprehensive
Lineup of Axial Fans
• Low noise level, long service life, and resistance to the
environment.
• Shaft supported by ball bearings for highly-reliable operation.
• Plastic-bladed models (44 type) and metal-bladed models
(28 type) included in series.
• R87T-A@A15H-WR Water-resistant AC Axial Fans
(IP X7 degree of protection) added to series.
Note: The compliant standards and certified safety standards depend on the
product. Check the information in Characteristics.
Refer to the Safety Precautions for All Axial
Fans on our website.
For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.
Model Number Structure
Model Number Legend
R87
1
-
2
3
4
5
6
7
1. Basic series
R87F:
R87T:
Plastic blade
Metal blade
2. Rated voltage
A1: 100 VAC
A3: 115 VAC
A4: 200 VAC
A6: 230 VAC
8
4. Frame size
8: 80 × 80
9: 92 × 92
1: 120 × 120
0: 150 dia.
6. Rotational speed
5. Frame thickness
3: 25
5: 38
7: 55
No marking: Lead wires
P:
Terminals (See note 1.)
H: High
M: Medium
L: Low
7. Terminal type
8. Type
No marking: Standard
3. Frame material
WR:
Water-resistant
A:
Die-cast aluminum
Note: 1. A Plug Cord (R87F-PC) is available as an option for models with terminals.
2. These tables show only how to read product markings. They do not indicate which products are available. Refer to “Ratings and Ordering
Information” when ordering.
Ordering Information
Available Models
AC Axial Fans
Series
R87F
(plastic
blades)
R87T
(metal
blades)
Size (mm)
Options (Order Separately)
Model
Datasheet available
Product name
Model
Datasheet available
80 × 80 × t25
R87F-A@A83
Refer to page 2.
Plug Cord
R87F-PC
Refer to page 24.
80 × 80 × t38
R87F-A@A85
Refer to page 4.
Finger Guard
R87F-FG@
Refer to page 25.
92 × 92 × t25
R87F-A@A93
Refer to page 6.
Filter
R87F-FL@(S)
Refer to page 26.
120 × 120 × t25
R87F-A@A13
Refer to page 8.
Set model
R87F-SET@@@@
Refer to page 25.
120 × 120 × t38
R87F-A@A15
Refer to page 10.
80 × 80 × t25
R87T-A@A83
Refer to page 12.
80 × 80 × t38
R87T-A@A85
Refer to page 14.
120 × 120 × t38
R87T-A@A15
Refer to page 16.
150-dia. × t38
R87T-A@A05
Refer to page 18.
150-dia. × t55
R87T-A@A07
Refer to page 20.
120 × 120 × t38
R87T-A@A15H-WR
Refer to page 22.
Note: Mounting screws are not attached to Finger Guard.
Order the Set model when the screws are needed.
Safety Precautions
Refer to the Safety Precautions for All Axial Fans on our website.
1
AC Axial Fans with Lead Wires (80 × 80 × t25 mm)
R87F-A@A83
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A) *
Frequency
(Hz)
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87F-A1A83H
100 VAC
0.097 0.080
R87F-A3A83H
0.085 0.070
R87F-A4A83H
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87F-A6A83H
230 VAC
0.046 0.039
R87F-A1A83L
100 VAC
0.063 0.055
R87F-A3A83L
0.055 0.048
R87F-A4A83L
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87F-A6A83L
230 VAC
0.028 0.024
0.048 0.041
0.033 0.030
7
6
2,600 3,000 0.6
0.7
39.2
53.9
32
36
5
4
1,900 2,100 0.4
0.5
19.5
23.5
28
30
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
CSA class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−30 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Bearings
Ball bearings
Weight
Approx. 230 g
Compliant standards
EN/IEC 60335 (CE marking compliant)
Certified standards
UL/CSA
2
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
R87F-A@A83L
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
R87F-A@A83H
60
60 Hz
50
50 Hz
40
40
60 Hz
30
50 Hz
20
30
10
20
0
0
0.2
0.4
0.6
Flow rate: Q (m3/min)
10
0
0
0.2
0.4
0.6
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
300
0.3 sq
Eight, 4.3 dia.
Screw hole for
grounding
71.5±0.3
80±0.5
M4 screw: 0.7 pitch
6
71.5±0.3
3±0.3
3±0.3
80±0.5
25±0.5
Direction of rotation
Direction of flow
Panel Cutouts
Outlet
71.5±0.3
Inlet
Four, 4.5 dia.
90 dia.
77
71.5±0.3
Four, 4.5 dia.
77 dia.
71.5±0.3
71.5±0.3
77
Options
Names
Finger Guard
Model
R87F-FG80
Datasheet available
Refer to page 25.
Filter
R87F-FL80
Refer to page 26.
Set model
R87F-SET8025
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
3
AC Axial Fans with Terminals (80 × 80 × t38 mm)
R87F-A@A85
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
Frequency
voltage
(Hz)
fluctuation
range (%)
R87F-A1A85HP
100 VAC
R87F-A3A85HP
R87F-A6A85HP
115 VAC 85% to
110% rated
200 VAC voltage
230 VAC
R87F-A1A85LP
100 VAC
R87F-A3A85LP
115 VAC 85% to
110% rated
200 VAC voltage
230 VAC
R87F-A4A85HP
R87F-A4A85LP
R87F-A6A85LP
Rated
current
(A) *
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
0.140 0.115
50/60
0.120 0.100
0.080 0.060
10
9
2,700 3,200 0.8
0.9
42.1
58.8
32
36
7
6
2,200 2,500 0.6
0.7
25.0
32.0
26
29
0.060 0.050
0.090 0.080
50/60
0.080 0.070
0.050 0.040
0.040 0.040
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Terminals
Insulation class
IEC class B (130°C)
UL class A (105°C)
CSA class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−30 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Bearings
Ball bearings
Weight
Approx. 280 g
Compliant standards
PSE, EN/IEC 60335 (CE marking compliant)
Certified standards
UL/CSA
4
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
R87F-A@A85LP
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
R87F-A@A85HP
60
50
60 Hz
40
50 Hz
88.3
78.5
68.6
58.8
49.0
30
39.2
60 Hz
20
29.4
50 Hz
19.6
10
9.8
0
0
0.2
0.4
0.6
0.8
1.0
0
0.25
0.5
Flow rate: Q (m3 /min)
0.75
1
Flow rate: Q (m3 /min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
Screw hole for grounding
Eight, 4.3 dia.
5.8
71.5±0.3
80±0.5
M4 screw: 0.7 pitch
Terminal shape
3±0.3
71.5±0.3
80±0.5
3±0.3
8
38±0.5
Direction of flow
Direction of rotation
2.8
Faston #110 terminal
(or equivalent)
Panel Cutouts
Outlet
71.5±0.3
Inlet
Four, 4.5 dia.
90 dia.
77
71.5±0.3
Four, 4.5 dia.
77 dia.
71.5±0.3
71.5±0.3
77
Options
Name
Model
Datasheet available
Plug Cord
R87F-PC
Refer to page 24.
Finger Guard
R87F-FG80
Refer to page 25.
Filter
R87F-FL80
Refer to page 26.
Set model
R87F-SET8038
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
5
AC Axial Fans with Terminals (92 × 92 × t25 mm)
R87F-A@A93
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Frequency
(Hz)
Rated
current
(A) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87F-A1A93HP
100 VAC
0.150 0.130
R87F-A3A93HP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.125 0.100
R87F-A6A93HP
230 VAC
0.055 0.050
R87F-A1A93LP
100 VAC
0.100 0.085
R87F-A3A93LP
0.090 0.075
R87F-A4A93LP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87F-A6A93LP
230 VAC
0.045 0.040
R87F-A4A93HP
Rated input
(W) *
0.070 0.060
0.050 0.043
13
11
2,550 3,050 0.9
1.0
49.0
68.6
33
36
7
6
1,900 2,200 0.7
0.8
24.5
34.3
29
32
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Terminals
Insulation class
IEC class B (130°C)
UL class A (105°C)
CSA class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−30 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Bearings
Ball bearings
Weight
Approx. 300 g
Compliant standards
PSE, EN/IEC 60335 (CE marking compliant)
Certified standards
UL/CSA
6
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
v
R87F-A@A93LP
70
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
R87F-A@A93HP
60 Hz
60
50 Hz
50
40
30
50
60 Hz
40
50 Hz
30
20
10
20
0
10
0
0
0.2
0.4
0
0.2
0.4
0.6
0.8 1.0
Flow rate: Q (m3/min)
0.6
0.8 1.0
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
c
Six, 4.3 dia.
Screw hole for grounding
7.8
82.5±0.3
92±0.5
M4 screw: 0.7 pitch
Two, 3.2±0.15 dia.
Terminal shape
2.8
4±0.3
82.5±0.3
92±0.5
4±0.3
9
25±0.5
Faston #110 terminal
(or equivalent)
Direction of rotation
Direction of flow
Panel Cutouts
Panel cutting reference dimensions (note 3 mounting holes)
Outlet
82.5±0.3
98 dia.
89 82.5±0.3
Inlet
Four, 4.5 dia.
82.5±0.3
Four, 4.5 dia.
89 dia.
82.5±0.3
89
Options
Name
Plug Cord
Model
Datasheet available
R87F-PC
Refer to page 24.
Finger Guard
R87F-FG90
Refer to page 25.
Filter
R87F-FL90
Refer to page 26.
Set model
R87F-SET9025
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
7
AC Axial Fans with Terminals (120 × 120 × t25 mm)
R87F-A@A13
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A) *
Frequency
(Hz)
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87F-A1A13HP
100 VAC
0.180 0.150
R87F-A3A13HP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.160 0.130
R87F-A6A13HP
230 VAC
0.080 0.070
R87F-A1A13LP
100 VAC
0.140 0.120
R87F-A3A13LP
0.130 0.110
R87F-A4A13LP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87F-A6A13LP
230 VAC
0.060 0.050
R87F-A4A13HP
Rated input
(W) *
0.090 0.075
0.080 0.060
14
12
2,400 2,800 1.9
2.2
44
42
39
43
12
10
1,700 2,000 1.3
1.5
20
24
32
34
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Terminals
Insulation class
IEC class B (130°C)
cULus class B (130°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
–30 to 70°C (no icing)
Ambient storage temperature
–40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Bearings
Ball bearings
Weight
Approx. 350 g
Compliant standards
PSE, EN/IEC 60335 (CE marking compliant)
Certified standards
cULus
8
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
R87F-A@A13LP
50
40
60 Hz
30
50 Hz
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
R87F-A@A13HP
50
40
60 Hz
30
50 Hz
20
20
10
10
0
0
0.4
0.8
1.2
1.6
2.0 2.4
0
0
0.4
0.8
Flow rate: Q (m3/min)
1.2 1.6 2.0 2.4
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
25±0.5
119.5±0.5
4±0.3
Screw hole for grounding
104.8±0.3
4±0.3
11
9.2
.\RWR-$3$1
ᨉ᧽ᨀᨁᨅᨊ22222
剌㫈屵ቯቮቍ
⍆⹂ቑ㋟ቯሥቭ
M4 screw: 0.7 pitch
104.8±0.3
119.5±0.5
Terminal shape
2.8
2.8
6
0.5
9
0.5
Eight, 4.3 dia.
8
Faston #110 terminal
(or equivalent)
Direction of rotation
Direction of flow
Panel Cutouts
Outlet
104.8±0.3
Inlet
Four, 4.5 dia.
126 dia.
104.8±0.3
116 dia.
104.8±0.3
116
Four, 4.5 dia.
104.8±0.3
116
Options
Name
Plug Cord
Model
Datasheet available
R87F-PC
Refer to page 24.
Finger Guard
R87F-FG120
Refer to page 25.
Filter
R87F-FL120(S)
Refer to page 26.
Set model
R87F-SET1225
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
9
AC Axial Fans with Terminals (120 × 120 × t38 mm)
R87F-A@A15
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Frequency
(Hz)
Rated
current
(A) *
100 VAC
0.230
0.200
R87F-A3A15HP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.190
0.170
0.110
0.100
R87F-A6A15HP
230 VAC
0.090
0.080
R87F-A1A15MP
100 VAC
0.220
0.180
R87F-A3A15MP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.180
0.160
0.110
0.090
R87F-A6A15MP
230 VAC
0.090
0.080
R87F-A1A15LP
100 VAC
0.170
0.150
R87F-A3A15LP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.140
0.120
R87F-A4A15LP
0.080
0.070
R87F-A6A15LP
230 VAC
0.070
0.060
R87F-A4A15MP
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87F-A1A15HP
R87F-A4A15HP
Rated input
(W) *
15
14
2,750 3,200 2.7
3.1
93
80
42
46
15
14
2,450 2,700 2.2
2.5
64
64
39
42
11
10
2,100 2,250 2.0
2.1
44
44
36
38
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Terminals
Insulation class
IEC class B (130°C)
cULus class B (130°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−30 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Glass polycarbonate
Bearings
Ball bearings
Weight
Approx. 540 g
Compliant standards
PSE, EN/IEC 60335 (CE marking compliant)
Certified standards
cULus
10
R87F/R87T
R87F-A@A15HP
R87F-A@A15MP
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
Flow Rate and Static Pressure Characteristics (Reference Values)
80
60Hz
60
R87F-A@A15LP
100
Static pressure: Ps (Pa)
100
80
60
50Hz
100
80
60
60 Hz
40
40
20
20
50 Hz
60 Hz
40
50 Hz
0
0.8
1.6
0
2.4
3.2
Flow rate: Q (m3/min)
20
0.8
1.6
2.4
3.2
Flow rate: Q (m3/min)
0
0.8
1.6
2.4
3.2
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
8
0.5
0.5
Eight, 4.3 dia.
Screw hole for grounding
11
9
.\RWR-$3$1
ᨉ᧽ᨀᨁᨅᨊ22222
剌㫈屵ቯቮቍ
⍆⹂ቑ㋟ቯሥቭ
2.8
11
119.5±0.5
104.8±0.3
M4 screw: 0.7 pitch
Terminal shape
9
4±0.3
4±0.3
104.8±0.3
119.5±0.5
38±0.5
Direction of flow
2.8
Faston #110 terminals
(or equivalent)
Direction of rotation
Panel Cutouts
Outlet
104.8±0.3
Inlet
Four, 4.5 dia.
126 dia.
Four, 4.5 dia.
116 dia.
104.8±0.3
116
104.8±0.3
104.8±0.3
116
Options
Name
Model
Datasheet available
Plug Cord
R87F-PC
Refer to page 24.
Finger Guard
R87F-FG120
Refer to page 25.
Filter
R87F-FL120(S)
Refer to page 26.
Set model
R87F-SET1238
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
11
AC Axial Fans with Lead Wires (80 × 80 × t25 mm)
R87T-A@A83
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A)*
Frequency
(Hz)
Rated input
(W)*
Rated
rotational
speed
(r/min)*
Maximum
flow rate
(m3/min)*
Maximum
static
pressure
(Pa)*
Noise (dB)*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87T-A1A83H
100 VAC
0.180 0.150
R87T-A3A83H
0.150 0.130
R87T-A4A83H
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87T-A6A83H
230 VAC
0.075 0.065
0.087 0.075
12
11
2,500 3,000 0.5
0.6
34.0
49.0 33
36
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−20 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Materials
Impedance protection
Frame
Die-cast aluminum
Blades
Steel plate (black coating)
Bearings
Ball bearings
Weight
Approx. 330 g
Standards
EN/IEC 60335 (CE marking compliant)
Certified standards
UL
12
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
Static pressure: Ps (Pa)
R87T-A@A83H
50
60 Hz
40
50 Hz
30
20
10
0
0
0.2
0.4
0.6
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
26.5 max.
300
0.3 sq
Eight, 4.5 dia.
Screw hole for grounding
5.5
80±0.5
71.5±0.3
M4 screw: 0.7 pitch
71.5±0.3
3±0.3
3±0.3
80±0.5
25±0.5
Direction of rotation
Direction of flow
Panel Cutouts
Inlet
Outlet
71.5±0.3
Four, 4.5 dia.
90 dia.
77
71.5±0.3
Four, 4.5 dia.
77 dia.
71.5±0.3
71.5±0.3
77
Options
Name
Model
Datasheet available
Finger Guard
R87F-FG80
Refer to page 25.
Filter
R87F-FL80
Refer to page 26.
Set model
R87F-SET8025
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
13
AC Axial Fans with Lead Wires (80 × 80 × t38 mm)
R87T-A@A85
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A) *
Frequency
(Hz)
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87T-A1A85H
100 VAC
0.180 0.160
R87T-A3A85H
0.155 0.135
R87T-A4A85H
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87T-A6A85H
230 VAC
0.080 0.070
0.085 0.075
12
10
2,800 3,300 0.80
0.90
42
58
37
40
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−20 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Steel plate (black coating)
Bearings
Ball bearings
Weight
Approx. 440 g
Compliant standards
EN/IEC 60335 (CE marking compliant)
Certified standards
UL
14
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
Static pressure: Ps (Pa)
R87T-A@A85H
60
50
40
60 Hz
30
50 Hz
20
10
0
0
0.2
0.4
0.6
0.8
1.0
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
300
0.3 sq
Eight, 4.5 dia.
Screw hole for grounding
5.8
80±0.5
71.5±0.3
M4 screw: 0.7 pitch
71.5±0.3
3±0.3
3±0.3
80±0.5
38±0.5
Direction of rotation
Direction of flow
Panel Cutouts
Inlet
Outlet
71.5±0.3
Four, 4.5 dia.
90 dia.
77
71.5±0.3
Four, 4.5 dia.
77 dia.
71.5±0.3
71.5±0.3
77
Options
Name
Model
Datasheet available
Finger Guard
R87F-FG80
Refer to page 25.
Filter
R87F-FL80
Refer to page 26.
Set model
R87F-SET8038
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
15
AC Axial Fans with Terminals (120 × 120 × t38 mm)
R87T-A@A15
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A) *
Frequency
(Hz)
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87T-A1A15HP
100 VAC
0.240 0.210
R87T-A3A15HP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
0.210 0.180
R87T-A6A15HP
230 VAC
0.110 0.090
R87T-A1A15MP
100 VAC
0.170 0.150
R87T-A3A15MP
0.140 0.120
R87T-A4A15MP
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87T-A6A15MP
230 VAC
0.070 0.060
R87T-A4A15HP
Rated input
(W) *
0.120 0.110
0.080 0.070
17
16
2,700 3,100 2.6
2.9
80
62
42
46
12
11
2,350 2,600 1.8
2.1
42
40
36
40
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Terminals
Insulation class
IEC class B (130°C)
cULus class B (130°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−20 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Impedance protection
Materials
Frame: Die-cast aluminum
Blades: Steel plate (black coating)
Bearings
Ball bearings
Weight
Approx. 540 g
Compliant standards
PSE, EN/IEC 60335 (CE marking compliant)
Certified standards
cULus
16
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
v
R87T-A@A15MP
100
Static pressure: Ps (Pa)
Static pressure: Ps (Pa)
R87T-A@A15HP
80
60
50 Hz
60 Hz
40
100
80
60
50 Hz
60 Hz
40
20
20
0
0
0.5
1
1.5
2
2.5
0.5
3
1
1.5
2
2.5
3
Flow rate: Q (m3/min)
3
Flow rate: Q (m /min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
8
Eight, 4.3 dia.
0.5
0.5
Screw hole for grounding
11
11
9
.\RWR-$3$1
ᨉ᧽ᨀᨁᨅᨊ22222
剌㫈屵ቯቮቍ
⍆⹂ቑ㋟ቯሥቭ
2.8
104.8±0.3
M4 screw: 0.7 pitch
119.5±0.5
Terminal shape
9
4±0.3
4±0.3
38±0.5
104.8±0.3
119.5±0.5
Direction of flow
Direction of rotation
2.8
Faston #110 terminal
(or equivalent)
Panel Cutouts
Outlet
104.8±0.3
Inlet
Four, 4.5 dia.
126 dia.
104.8±0.3
116 dia.
104.8±0.3
116
Four, 4.5 dia.
104.8±0.3
116
Options
Name
Model
Datasheet available
Plug Cord
R87F-PC
Refer to page 24.
Finger Guard
R87F-FG120
Refer to page 25.
Filter
R87F-FL120(S)
Refer to page 26.
Set model
R87F-SET1238
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
17
AC Axial Fans with Lead Wires (150-dia. × t38 mm)
R87T-A@A05
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
Frequency
voltage
(Hz)
fluctuation
range (%)
Rated
current
(A) *
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87T-A1A05H
100 VAC
0.550 0.460
R87T-A3A05H
0.470 0.390
R87T-A4A05H
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87T-A6A05H
230 VAC
0.220 0.190
0.260 0.220
50
48
2,650 3,100 4.8
5.7
104
107
56
58
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−20 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Thermal protection
Materials
Frame: Die-cast aluminum
Blades: Steel plate (mat black baked coating)
Bearings
Ball bearings
Weight
Approx. 840 g
Compliant standards
EN/IEC 60335 (CE marking compliant)
Certified standards
UL
18
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Value)
Static pressure: Ps (Pa)
R87T-A@A05H
120
100
50 Hz
80
60 Hz
60
40
20
0
0
1.0
2.0
3.0
4.0
5.0 6.0
Flow rate: Q (m3 /min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
38±0.5
151 dia.
6±0.3
6±0.3
146 dia.
144 dia.
Four, 4.3 dia.
175±1.5
162±0.3
Ground Screw
Section
300
0.5 sq
Direction of flow
7
Direction of rotation
Panel Cutouts
Outlet and Inlet
146 dia.
162±0.3
Two, 4.5 dia.
Options
Name
Model
Finger Guard
R87F-FG150
Refer to page 25.
Datasheet available
Set model
R87F-SET1538
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
19
AC Axial Fans with Lead Wires (150-dia. × t55 mm)
R87T-A@A07
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
voltage
fluctuation
range (%)
Rated
current
(A) *
Frequency
(Hz)
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
R87T-A1A07H
100 VAC
0.480 0.420
R87T-A3A07H
0.420 0.370
R87T-A4A07H
115 VAC 85% to 110%
50/60
200 VAC rated voltage
R87T-A6A07H
230 VAC
0.210 0.190
0.240 0.210
43
40
2,800 3,250 5.0
5.8
118
88
52
56
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Ambient operating temperature
−20 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
25% to 85%
Protection
Thermal protection
Materials
Frame: Die-cast aluminum
Blades: Steel plate (black coating)
Bearings
Ball bearings
Weight
Approx. 1,200 g
Compliant standards
EN/IEC 60335 (CE marking compliant)
Certified standards
UL
20
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Value)
Static pressure: Ps (Pa)
R87T-A@A07H
140
120
50 Hz
100
60 Hz
80
60
40
20
0
0
1
2
3
4
5
6
7
Flow rate: Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
150±0.5 dia.
55±0.5
Four, 4.3 dia.
6±0.3
6±0.3
146 dia.
144 dia.
162±0.3
175±1.5
Ground Screw
Section
300
0.5 sq
7
Direction of rotation
Direction of flow
Panel Cutouts
Outlet and Inlet
146 dia.
162±0.3
Two, 4.5 dia.
Options
Name
Model
Finger Guard
R87F-FG150
Refer to page 25.
Datasheet available
Set model
R87F-SET1555
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
21
Water-resistant AC Axial Fans with Lead Wires (120 × 120 × t38 mm)
R87T-A@A15H-WR
Specifications
Ratings and Ordering Information
Note: An asterisk (*) indicates a nominal value.
Item
Rated
voltage
(V)
Model
Permitted
Frequency
voltage
(Hz)
fluctuation
range (%)
R87T-A1A15H-WR 100 VAC
R87T-A3A15H-WR 115 VAC
R87T-A4A15H-WR 200 VAC
R87T-A6A15H-WR
Rated
current
(A) *
Rated input
(W) *
Rated
rotational
speed
(r/min) *
Maximum
flow rate
(m3/min) *
Maximum
static
pressure
(Pa) *
Noise (dB)
*
50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz
0.350 0.280
85% to 110%
50/60
rated voltage
200 to 230
VAC
0.300 0.240 22
20
0.170 0.135
2,550 2,900 2.7
3.2
75.0
80.0
42
46
0.145 0.115 15 to 22
Characteristics
Motor type
Single-phase shading coil induction motor (2-pole, open type)
Terminal type
Lead wires
Insulation class
IEC class B (130°C)
UL class A (105°C)
CSA class A (105°C)
Insulation resistance
100 MΩ min. (at 500 VDC) between all power supply connections and uncharged metal parts.
Insulation withstand voltage
2,000 VAC (1 minute) between all power supply connections and uncharged metal parts.
Degree of protection
IP X7
Ambient operating temperature
−40 to 70°C (no icing)
Ambient storage temperature
−40 to 85°C (no icing)
Ambient humidity
95% max.
Protection
Impedance protection
Materials
Frame
Blades
Die-cast aluminum
Black coating
Zinc die-cast
Bearings
Ball bearings
Weight
Approx. 650 g
Standards
EN/IEC 60335 (CE marking compliant)
Certified standards
CUL
22
R87F/R87T
Flow Rate and Static Pressure Characteristics (Reference Values)
Static pressure Ps (Pa)
R87T-A@A15H-WR
80
60 Hz
60
50 Hz
40
20
00
1.0
2.0
3.0
Flow rate Q (m3/min)
Note: For details on measurement conditions, refer to Flow Rate and Static Pressure on Safety Precautions for All Axial Fans.
Dimensions
(Unit: mm)
119.5±0.5
38±0.5
104.8±0.3
4±0.3
4±0.3
Lead wire groove
(coated with sealant)
Ground Screw Section
119.5±0.5
11
1,000
UL1333 AWG22
104.8±0.3
Direction of flow
M4 × 0.7
double sems screw
M4 screw: 0.7 pitch
Eight, 4.3 dia.
Direction of rotation
Panel Cutouts
Outlet
104.8±0.3
Inlet
Four, 4.5 dia.
126 dia.
115
104.8±0.3
Four, 4.5 dia.
115 dia.
104.8±0.3
104.8±0.3
115
Options
Name
Model
Page number
Finger Guard
R87F-FG120
Refer to page 25.
Filter
R87F-FL120(S)
Refer to page 26.
Set model
R87F-SET1238
Refer to page 25.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
23
Plug Cord
R87F-PC
Accessories (Order Separately)
Available Models
Cord length
Model number
Weight (g)
1m
R87F-PC
39
2m
R87F-PC-20
69
R87F-PC Rating: 250 VAC, 3 A
UL-certified Plug Cord
Dimensions
(Unit: mm)
R87F-PC
9±0.5
7.5±0.5
23.5±0.5
(8)
1,000
15.5±0.5
18±0.5
Connectable to Faston #110 terminals (or equivalent).
Note: This Plug Cord is used for Axial Fans with terminals.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
24
Finger Guards
R87F-FG
Accessories (Order Separately)
Available Models
Size
150 dia.
120 × 120
92 × 92
80 × 80
Model number
R87F-FG150
R87F-FG120
R87F-FG90
R87F-FG80
Weight (g)
Approx. 58
Approx. 45
Approx. 25
Approx. 20
Applicable Axial Fans
Set model
Axial Fans
Model
size
R87F-A@A83
R87T-A@A83
R87F-A@A85
R87T-A@A85
Finger Guard
Qty
Model
Contents
Hexagonal nuts
size
Qty
Screws
size
Qty
R87F-SET8025
80 x 80
1
R87F-FG80
M4
4
M4 x L38
4
R87F-SET8038
80 x 80
1
R87F-FG80
M4
4
M4 x L50
4
R87F-A@A93
R87F-SET9025
92 x 92
1
R87F-FG90
R87F-A@A13
R87F-A@A15
R87T-A@A15
R87T-A@A15H-WR
R87T-A@A05
R87T-A@A07
R87F-SET1225
120 x 120
1
R87F-FG120
M4
M3
M4
3
1
4
M4 x L38
M3 x L38
M4 x L38
3
1
4
R87F-SET1238
120 x 120
1
R87F-FG120
M4
4
M4 x L50
4
R87F-SET1538
R87F-SET1555
150 dia.
150 dia.
1
1
R87F-FG150
R87F-FG150
M4
M4
2
2
M4 x L50
M4 x L70
2
2
Note: Finger Guards reduce the flow rate by approximately 2% to 5%.
Dimensions
(Unit: mm)
Material: steel, Joints: spot welded, Surface: nickel-chrome plated
R87F-FG150
R87F-FG120
6
Four, 4.6±0.3 dia.
5.5
105±0.5
22 dia.
27 dia.
105±0.5
5.6
162.6
6
R87F-FG90
R87F-FG80
Four, 4.6 dia.
82.4
Four, 4.6
+0.2
0
dia.
71.5
82.4
5
71.5
5.5
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
25
Filters
R87F-FL
Accessories (Order Separately)
Available Models
Applicable Axial Fans
Filter
Size
Model number
120 × 120
R87F-FL120
92 × 92
R87F-FL90
80 × 80
R87F-FL80
120 × 120
R87F-FL120S
Note: The filter contains one medium.
AC Axial Fan
Model
R87T-A@A0 Series
R89F-DS1225@ series
R89F-DS1238@ series
120 × 120 R89F-MS1238HP
R87F-A@A1 Series
R87T-A@A1 Series
92 × 92
R87F-A@A9 Series
R87F-A@A8 Series
80 × 80
R87T-A@A8 Series
Filter
Size
150 dia.
Weight (g)
Approx. 43
Approx. 30
Approx. 21
Approx. 19
Media
Size
Model number
120 × 120
R87F-FL120-M120
92 × 92
R87F-FL90-M90
80 × 80
R87F-FL80-M80
Note: Use the following model number to order the Media only.
R87F-FL@-M@ (@: 120, 90, or 80)
(One set containing five Media, weight: 5 g max.)
Plastic
---
R87F-FL120
R87F-FL120S
R87F-FL90
---
R87F-FL80
---
Note: Filters reduce the flow rate by approximately 20% to 40%.
Ensure that there is no clogging.
Dimensions
R87F-FL@
Plastic Filter
Aluminum
---
(Unit: mm)
R87F-FL120
10.5
123.7
118
104.8
6.3
123.7
104.8
118
Guard
Media
Plastic filter
Four, 4.5-dia.
R87F-FL90
96.5
Retainer
10.5
93.5
82.5
Mounting Method
1. Attach the guard to the Fan using the
mounting bolts. (There are no mounting
bolts provided with the Plastic Filter.)
2. With the media held between the retainer
and the guard, hook the retainer to the
guard. (The Media and retainer can be
one-touch mounted/dismounted.)
93.5
96.5
82.5
Four, 3.8 dia.
R87F-FL80
10
5.8
83.5
80
71.3
R87F-FL120S
Screen Filter
80
83.5
71.3
Four, 4.5-dia.
R87F-FL120S
119.5±0.5
104.8±0.3
Screen filter
Four,
4.3 dia.
119.5±0.5
104.8±0.3
Stainless
steel
screen
Aluminum frame
4
2
Note: 1. The Screen Filter is
made using aluminium
and has an EMI/RFI
shielding effect.
2. When mounting the
Screen Filter, make sure
that it does not come in
contact with the fan
blades.
3. The screen is a 30 × 30
aluminum mesh.
(30 aluminum wires per inch)
26
R87F/R87T
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
In the interest of product improvement, specifications are subject to change without notice.
27
Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.
Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.
Limitation on Liability; Etc.
OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.
Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.
Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.
Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.
Errors and Omissions.
Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.
2021.4
In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2021 All Right Reserved.
工商网监
湘ICP备2023018690号
