1N4002FF

1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 1N4004 and 1N4007 are Preferred Devices Axial Lead Standard Recovery Rectifiers This data sheet provides information on subminiature size, axial lead mounted rectifiers for general−purpose low−power applications. Features http://onsemi.com • Shipped in plastic bags, 1000 per bag • Available Tape and Reeled, 5000 per reel, by adding a “RL” suffix to the part number LEAD MOUNTED RECTIFIERS 50−1000 VOLTS DIFFUSED JUNCTION • Available in Fan−Fold Packaging, 3000 per box, by adding a “FF” suffix to the part number • Pb−Free Packages are Available Mechanical Characteristics • Case: Epoxy, Molded • Weight: 0.4 gram (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal • • Leads are Readily Solderable Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds, 1/16 in. from case Polarity: Cathode Indicated by Polarity Band CASE 59−10 AXIAL LEAD PLASTIC MARKING DIAGRAM A 1N400x YYWWG G A = Assembly Location 1N400x = Device Number x = 1, 2, 3, 4, 5, 6 or 7 YY = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2005 1 August, 2005 − Rev. 12 Publication Order Number: 1N4001/D 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 MAXIMUM RATINGS Rating †Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage †Non−Repetitive Peak Reverse Voltage (halfwave, single phase, 60 Hz) †RMS Reverse Voltage †Average Rectified Forward Current (single phase, resistive load, 60 Hz, TA = 75°C) †Non−Repetitive Peak Surge Current (surge applied at rated load conditions) Operating and Storage Junction Temperature Range Symbol VRRM VRWM VR VRSM VR(RMS) IO 1N4001 50 1N4002 100 1N4003 200 1N4004 400 1N4005 600 1N4006 800 1N4007 1000 Unit V 60 35 120 70 240 140 480 280 1.0 720 420 1000 560 1200 700 V V A IFSM TJ Tstg 30 (for 1 cycle) −65 to +175 A °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. ELECTRICAL CHARACTERISTICS† Rating Maximum Instantaneous Forward Voltage Drop, (iF = 1.0 Amp, TJ = 25°C) Maximum Full−Cycle Average Forward Voltage Drop, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) Maximum Reverse Current (rated DC voltage) (TJ = 25°C) (TJ = 100°C) Maximum Full−Cycle Average Reverse Current, (IO = 1.0 Amp, TL = 75°C, 1 inch leads) †Indicates JEDEC Registered Data Symbol vF VF(AV) IR 0.05 1.0 IR(AV) − 10 50 30 mA Typ 0.93 − Max 1.1 0.8 Unit V V mA http://onsemi.com 2 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 10 IF, FORWARD CURRENT (A) 1.0E−04 IR, REVERSE CURRENT (A) 1.0E−05 TC = 150°C TC = 100°C 1 TC = 100°C 1.0E−06 1.0E−07 TC = 150°C TC = 25°C 0.1 0.5 0.6 0.7 0.8 0.9 1 1.1 1.2 1.0E−08 TC = 25°C 100 200 300 400 500 600 700 800 900 1000 1.0E−09 0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) VR, REVERSE VOLTAGE (V) Figure 1. Typical Forward Voltage Figure 2. Typical Reverse Current 100 TJ = 25°C C, CAPACITANCE (pF) 10 1 0 20 40 60 80 100 120 140 160 180 200 VR, REVERSE VOLTAGE (V) Figure 3. Typical Capacitance http://onsemi.com 3 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 ORDERING INFORMATION Device 1N4001 1N4001G 1N4001FF 1N4001FFG 1N4001RL 1N4001RLG 1N4002 1N4002G 1N4002FF 1N4002FFG 1N4002RL 1N4002RLG 1N4003 1N4003G 1N4003FF 1N4003FFG 1N4003RL 1N4003RLG 1N4004 1N4004G 1N4004FF 1N4004FFG 1N4004RL 1N4004RLG 1N4005 1N4005G 1N4005FF 1N4005FFG 1N4005RL 1N4005RLG Package Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Shipping† 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. http://onsemi.com 4 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 ORDERING INFORMATION Device 1N4006 1N4006G 1N4006FF 1N4006FFG 1N4006RL 1N4006RLG 1N4007 1N4007G 1N4007FF 1N4007FFG 1N4007RL 1N4007RLG Package Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Axial Lead* Axial Lead* (Pb−Free) Shipping† 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel 1000 Units/Bag 1000 Units/Bag 3000 Units/Box 3000 Units/Box 5000/Tape & Reel 5000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. *This package is inherently Pb−Free. http://onsemi.com 5 1N4001, 1N4002, 1N4003, 1N4004, 1N4005, 1N4006, 1N4007 PACKAGE DIMENSIONS AXIAL LEAD CASE 59−10 ISSUE U B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH JEDEC DO−41 OUTLINE SHALL APPLY 4. POLARITY DENOTED BY CATHODE BAND. 5. LEAD DIAMETER NOT CONTROLLED WITHIN F DIMENSION. K F D A POLARITY INDICATOR OPTIONAL AS NEEDED (SEE STYLES) F K DIM A B D F K INCHES MIN MAX 0.161 0.205 0.079 0.106 0.028 0.034 −−− 0.050 1.000 −−− MILLIMETERS MIN MAX 4.10 5.20 2.00 2.70 0.71 0.86 −−− 1.27 25.40 −−− ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 6 1N4001/D