MUR450PFG

MUR450PF Preferred Device SWITCHMODEt Power Rectifier These state−of−the−art devices are designed for power factor correction in discontinuous and critical conduction mode. Features • • • • • • 520 V Rating Meets 80% Derating Requirements of Major OEMs Low Forward Voltage Drop Low Leakage Ultrafast 95 Nanosecond Recovery Time Reduces Forward Conduction Loss These are Pb−Free Devices* http://onsemi.com ULTRAFAST RECTIFIER 4.0 AMPERES, 520 VOLTS Applications • DCM PFC Designs • Switching Power Supplies • Power Inverters Mechanical Characteristics: • • • • • Case: Epoxy, Molded Epoxy Meets UL 94 V−0 @ 0.125 in Weight: 1.1 Gram (Approximately) Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds Rating Symbol VRRM VRWM VR IF(AV) IFSM Value 520 Unit V AXIAL LEAD CASE 267 STYLE 1 MARKING DIAGRAM MAXIMUM RATINGS Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (Rated VR, TC = 65°C) Non−Repetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, 60 Hz) Operating Junction Temperature Range Storage Temperature Range ESD Ratings: Machine Model = C Human Body Model = 3B A MUR 450 YYWW G G A = Assembly Location MUR450 = Device Number YY = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) 4.0 85 A A TJ Tstg ESD −65 to +175 −65 to +175 > 400 > 8000 °C °C V ORDERING INFORMATION Device MUR450PF MUR450PFG Package Axial Lead** Axial Lead** Shipping † 500 Units/Bag 500 Units/Bag THERMAL CHARACTERISTICS Rating Thermal Resistance, Junction−to−Ambient Symbol RqJA Value See Note 2 Unit °C/W MUR450PFRL MUR450PFRLG Axial Lead** 1500/Tape & Reel Axial Lead** 1500/Tape & Reel Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2006 †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. **This package is inherently Pb−Free. Preferred devices are recommended choices for future use and best overall value. 1 July, 2006 − Rev. 2 Publication Order Number: MUR450PF/D MUR450PF ELECTRICAL CHARACTERISTICS Rating Maximum Instantaneous Forward Voltage Drop (Note 1) (IF = 4 Amps, TJ = 25°C) (IF = 4 Amps, TJ = 150°C) Maximum Instantaneous Reverse Current (Note 1) (VR = 520 V, TJ = 25°C) (VR = 520 V, TJ = 150°C) Maximum Reverse Recovery Time (IF = 1 Amp, di/dt = 50 Amps/ms, VR = 30 V, TJ = 25°C) 1. Pulse Test: Pulse Width = 300 ms, Duty Cycle ≤ 2.0%. Symbol VF 1.15 0.98 IR 5.0 400 trr 95 ns mA Value Unit V iF, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 10 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) 100 10 1.0 150°C 1.0 150°C 125°C 0.1 0 0.2 0.4 0.6 25°C 0.8 1.0 1.2 1.4 1.6 125°C 0.1 0 0.2 0.4 0.6 0.8 25°C 1.0 1.2 1.4 1.6 vF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage 1.0E−3 IR, REVERSE CURRENT (AMPS) 1.0E−4 IR, MAXIMUM REVERSE CURRENT (AMPS) 1.0E−3 150°C 125°C 150°C 1.0E−4 1.0E−5 1.0E−6 1.0E−7 1.0E−8 1.0E−9 0 25°C 1.0E−5 125°C 1.0E−6 1.0E−7 25°C 1.0E−8 1.0E−9 0 100 200 300 400 500 100 200 300 400 500 VR, REVERSE VOLTAGE (VOLTS) VR, REVERSE VOLTAGE (VOLTS) Figure 3. Typical Reverse Current Figure 4. Maximum Reverse Current http://onsemi.com 2 MUR450PF IF, AVERAGE FORWARD CURRENT (AMPS) PFO, AVERAGE POWER DISSIPATION (WATTS) 6 dc 5 4 SQUARE WAVE 3 2 1 0 0 20 40 60 80 100 120 140 160 180 200 TA, AMBIENT TEMPERATURE (°C) RqJA = 28 °C/W 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 IO, AVERAGE FORWARD CURRENT (AMPS) dc SQUARE WAVE Figure 5. Current Derating Figure 6. Forward Power Dissipation 100 C, CAPACITANCE (pF) 10 25°C 1 0 50 100 150 200 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance R(t), TRANSIENT THERMAL RESISTANCE 100 0.5 0.2 0.1 0.05 1 0.01 0.1 Single Pulse 0.01 0.000001 0.00001 0.0001 0.001 0.01 t, TIME (s) 0.1 1.0 10 P(pk) t1 t2 10 DUTY CYCLE, D = t1/t2 100 1000 Figure 8. Thermal Response http://onsemi.com 3 MUR450PF NOTE 2 — AMBIENT MOUNTING DATA Data shown for thermal resistance, junction−to−ambient (RqJA) for the mountings shown is to be used as typical guideline values for preliminary engineering or in case the tie point temperature cannot be measured. TYPICAL VALUES FOR RqJA IN STILL AIR Mounting Method 1 2 RqJA 3 Lead Length, L (IN) 1/8 1/4 1/2 3/4 50 51 53 55 58 59 61 63 28 Units °C/W °C/W °C/W MOUNTING METHOD 1 P.C. Board Where Available Copper Surface area is small. L L ÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉ MOUNTING METHOD 2 Vector Push−In Terminals T−28 L L ÉÉÉÉÉÉÉÉÉÉÉÉ ÉÉÉÉÉÉÉÉÉÉÉÉ MOUNTING METHOD 3 P.C. Board with 1−1/2 ″ x 1−1/2 ″ Copper Surface ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ ÉÉ L = 1/2 ″ Board Ground Plane http://onsemi.com 4 MUR450PF PACKAGE DIMENSIONS AXIAL LEAD CASE 267−05 (DO−201AD) ISSUE G K D 1 A 2 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. DIM A B D K INCHES MIN MAX 0.287 0.374 0.189 0.209 0.047 0.051 1.000 −−− MILLIMETERS MIN MAX 7.30 9.50 4.80 5.30 1.20 1.30 25.40 −−− B K STYLE 1: PIN 1. CATHODE (POLARITY BAND) 2. ANODE SWITCHMODE is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative http://onsemi.com 5 MUR450PF/D