NTMFS4H02NT1G

NTMFS4H02N Power MOSFET 25 V, 193 A, Single N−Channel, SO−8FL Features • • • • Optimized Design to Minimize Conduction and Switching Losses Optimized Package to Minimize Parasitic Inductances Optimized material for improved thermal performance These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant Applications • • • • High Performance DC-DC Converters System Voltage Rails Netcom, Telecom Servers & Point of Load Value Units Drain-to-Source Voltage VDSS 25 V Gate-to-Source Voltage VGS ±20 V Continuous Drain Current RqJA (TA = 25°C, Note 1) ID 37 A Power Dissipation RqJA (TA = 25°C, Note 1) PD 3.13 W Continuous Drain Current RqJC (TC = 25°C, Note 1) ID 193 A Power Dissipation RqJC (TC = 25°C, Note 1) PD 83 W Pulsed Drain Current (tp = 10 ms) IDM 412 A Single Pulse Drain-to-Source Avalanche Energy (Note 1) (IL = 47 Apk, L = 0.3 mH) EAS 331 mJ Drain to Source dV/dt dV/dt 7 V/ns TJ(max) 150 °C TSTG −55 to 150 °C Storage Temperature Range Lead Temperature Soldering Reflow (SMD Styles Only), Pb-Free Versions (Note 2) MAX RDS(on) TYP QGTOT 4.5 V 2.2 mW 18 nC 10 V 1.4 mW 38.5 nC SO8−FL (5 x 6 mm) Symbol Maximum Junction Temperature VGS PIN CONNECTIONS MAXIMUM RATINGS (TJ = 25°C unless otherwise stated) Parameter http://onsemi.com (Top View) TSLD (Bottom View) N−CHANNEL MOSFET D (5−8) G (4) S (1,2,3) ORDERING INFORMATION °C 260 See detailed ordering and shipping information on page 7 of this data sheet. Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Values based on copper area of 645 mm2 (or 1 in2) of 2 oz copper thickness and FR4 PCB substrate. 2. For more information, please refer to our Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. 3. This is the absolute maximum rating. Parts are 100% UIS tested at TJ = 25°C, VGS = 10 V, IL = 31 A, EAS = 144 mJ. THERMALCHARACTERISTICS Parameter Thermal Resistance, Junction-to-Ambient (Note 1 and 4) Junction-to-Case (Note 1 and 4) Symbol Max RqJA RqJC 40.0 1.5 Units °C/W 4. Thermal Resistance RqJA and RqJC as defined in JESD51−3. © Semiconductor Components Industries, LLC, 2014 May, 2014 − Rev. 3 1 Publication Order Number: NTMFS4H02N/D NTMFS4H02N ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Drain−to−Source Breakdown Voltage V(BR)DSS VGS = 0 V, ID = 250 mA 25 Drain−to−Source Breakdown Voltage Temperature Coefficient V(BR)DSS/ TJ Typ Max Unit OFF CHARACTERISTICS Zero Gate Voltage Drain Current IDSS Gate−to−Source Leakage Current V 18.5 VGS = 0 V, VDS = 20 V mV/°C TJ = 25°C 1 TJ = 125°C 20 IGSS VDS = 0 V, VGS = 20 V VGS(TH) VGS = VDS, ID = 250 mA 100 mA nA ON CHARACTERISTICS (Note 5) Gate Threshold Voltage Negative Threshold Temperature Coefficient VGS(TH)/TJ Drain−to−Source On Resistance Forward Transconductance RDS(on) 1.2 2.1 3.7 VGS = 10 V ID = 30 A 1.1 1.4 VGS = 4.5 V ID = 30 A 1.7 2.2 gFS VDS = 12 V, ID = 15 A V mV/°C 84 mW S CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance CISS Output Capacitance COSS Reverse Transfer Capacitance CRSS 2651 VGS = 0 V, f = 1 MHz, VDS = 12 V 103 Total Gate Charge QG(TOT) 18 Threshold Gate Charge QG(TH) 2.7 Gate−to−Source Charge QGS Gate−to−Drain Charge QGD Total Gate Charge Gate Resistance pF 1814 VGS = 4.5 V, VDS = 12 V; ID = 30 A nC 7.2 4.2 QG(TOT) VGS = 10 V, VDS = 12 V; ID = 30 A 38.5 RG TA = 25°C 1.0 nC 2 W SWITCHING CHARACTERISTICS, VGS = 4.5 V (Note 5) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(ON) tr td(OFF) 13.1 VGS = 4.5 V, VDD = 12 V, ID = 15 A, RG = 3.0 W tf 20 ns 22.2 9.1 SWITCHING CHARACTERISTICS, VGS = 10 V (Note 5) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(ON) tr td(OFF) 9.5 VGS = 10 V, VDD = 12 V, ID = 15 A, RG = 3.0 W tf 18.5 ns 30.3 5 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage Reverse Recovery Time VSD TJ = 25°C 0.75 TJ = 125°C 0.56 tRR Charge Time ta Discharge Time tb Reverse Recovery Charge VGS = 0 V, IS = 10 A 1.1 V 46.3 VGS = 0 V, dIS/dt = 100 A/ms, IS = 30 A QRR 23.9 ns 22.4 51 nC Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 2 NTMFS4H02N ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise specified) Parameter Symbol Test Condition Min Typ Max Unit PACKAGE PARASITIC VALUES Source Inductance LS Drain Inductance LD Gate Inductance LG TA = 25°C 0.57 nH 0.13 nH 1.37 nH Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 5. Pulse Test: pulse width v 300 ms, duty cycle v 2%. 6. Switching characteristics are independent of operating junction temperatures. http://onsemi.com 3 NTMFS4H02N TYPICAL CHARACTERISTICS VGS = 10 V to 3.7 V 140 VGS = 3.5 V TJ = 25°C 120 VGS = 3.3 V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) 140 100 VGS = 3.1 V 80 VGS = 2.9 V 60 40 VGS = 2.7 V 20 100 80 TJ = 125°C 60 40 TJ = 25°C 20 VGS = 2.5 V TJ = −55°C 0 0 0.5 1.0 1.5 2.0 2.5 0 3.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VDS, DRAIN−TO−SOURCE VOLTAGE (V) VGS, GATE−TO−SOURCE VOLTAGE (V) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 0.0030 4.0 0.0020 0.0019 VGS = 30 V T = 25°C 0.0018 0.0025 VGS = 4.5 V 0.0017 0.0016 0.0020 0.0015 0.0014 0.0013 0.0015 0.0012 VGS = 10 V 0.0011 0.0010 3 4 5 6 7 8 9 0.0010 10 1.5 40 50 60 70 80 90 100 110 120 ID, DRAIN CURRENT (A) Figure 3. On−Resistance vs. VGS Figure 4. On−Resistance vs. Drain Current and Gate Voltage 1E−04 ID = 30 A VGS = 10 V VGS = 0 V TJ = 150°C 1E−05 1.4 TJ = 125°C 1E−06 1.3 1.2 TJ = 85°C 1E−07 1.1 1.0 TJ = 25°C 1E−08 0.9 0.8 0.7 −50 30 IDSS, LEAKAGE (A) 1.6 20 VGS (V) 1.7 RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) VDS = 5 V 120 1E−09 −25 0 25 50 75 100 125 150 5 10 15 20 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current vs. Voltage http://onsemi.com 4 25 NTMFS4H02N 4800 4400 4000 3600 VGS, GATE−TO−SOURCE VOLTAGE (V) C, CAPACITANCE (pF) TYPICAL CHARACTERISTICS TJ = 25°C VGS = 0 V 3200 Ciss 2800 2400 2000 1600 Coss 1200 800 400 0 Crss 0 5 10 15 20 6 Qgs 4 Qgd TJ = 25°C VGS = 10 V VDD = 12.0 V ID = 30 A 2 0 0 4 8 12 16 20 24 32 28 36 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Qg, TOTAL GATE CHARGE (nC) Figure 7. Capacitance Variation Figure 8. Gate−to−Source and Drain−to−Source Voltage vs. Total Charge 40 30 VDD = 12 V ID = 15 A VGS = 10 V VGS = 0 V td(off) IS, SOURCE CURRENT (A) t, TIME (ns) QT 8 25 1000 tf 100 tr td(on) 10 25 20 TJ = 125°C TJ = 25°C 15 10 5 0 1 1 10 0.4 100 0.5 0.6 0.7 0.8 0.9 1.0 VSD, SOURCE−TO−DRAIN VOLTAGE (V) Figure 9. Resistive Switching Time Variation vs. Gate Resistance Figure 10. Diode Forward Voltage vs. Current 100 ms 100 1 ms 10 10 ms 0 V < VGS < 10 V 1 RDS(on) Limit Thermal Limit Package Limit 0.1 0.01 0.01 0.1 1 dc 10 EAS, SINGLE PULSE DRAIN−TO− SOURCE AVALANCHE ENERGY (mJ) RG, GATE RESISTANCE (W) 1000 ID, DRAIN CURRENT (A) 10 100 150 140 130 120 110 100 90 80 70 60 50 40 30 20 10 0 ID = 31 A 25 50 75 100 125 VDS, DRAIN−TO−SOURCE VOLTAGE (V) TJ, STARTING JUNCTION TEMPERATURE (°C) Figure 11. Maximum Rated Forward Biased Safe Operating Area Figure 12. Maximum Avalanche Energy vs. Starting Junction Temperature http://onsemi.com 5 150 NTMFS4H02N TYPICAL CHARACTERISTICS 100 50% Duty Cycle 20% R(t) (°C/W) 10 10% 5% 2% 1 1% PCB Cu Area 650 mm2 PCB Cu thk 1 oz Single Pulse 0.1 0.000001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 1000 1E−05 1E−04 1E−03 PULSE TIME (sec) Figure 13. Thermal Characteristics 1E+03 220 200 ID, DRAIN CURRENT (A) 180 160 1E+02 GFS (S) 140 120 100 80 1E+01 60 40 20 0 1E+00 0 20 40 60 80 100 120 140 1E−07 1E−06 ID (A) PULSE WIDTH (sec) Figure 14. GFS vs. ID Figure 15. Avalanche Characteristics http://onsemi.com 6 NTMFS4H02N ORDERING INFORMATION Package Shipping† NTMFS4H02NT1G SO8−FL (Pb-Free) 1500 / Tape & Reel NTMFS4H02NT3G SO8−FL (Pb-Free) 5000 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. MARKING DIAGRAM D S S S G 1 SO−8 FLAT LEAD CASE 488AA STYLE 1 A Y W ZZ D 4H02N AYWZZ D D = Assembly Location = Year = Work Week = Lot Traceability http://onsemi.com 7 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS DFN5 5x6, 1.27P (SO−8FL) CASE 488AA ISSUE N 1 DATE 25 JUN 2018 SCALE 2:1 2X NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSION D1 AND E1 DO NOT INCLUDE MOLD FLASH PROTRUSIONS OR GATE BURRS. 0.20 C D A 2 B D1 2X 0.20 C 4X E1 2 q E c 1 2 3 A1 4 TOP VIEW C DETAIL A 0.10 C SEATING PLANE A 0.10 C SIDE VIEW MILLIMETERS MIN NOM MAX 0.90 1.00 1.10 0.00 −−− 0.05 0.33 0.41 0.51 0.23 0.28 0.33 5.00 5.15 5.30 4.70 4.90 5.10 3.80 4.00 4.20 6.00 6.30 6.15 5.70 5.90 6.10 3.45 3.65 3.85 1.27 BSC 0.51 0.575 0.71 1.20 1.35 1.50 0.51 0.575 0.71 0.125 REF 3.00 3.40 3.80 0_ −−− 12 _ DIM A A1 b c D D1 D2 E E1 E2 e G K L L1 M q GENERIC MARKING DIAGRAM* DETAIL A 1 0.10 b C A B 0.05 c 8X XXXXXX AYWZZ e/2 e L 1 4 K RECOMMENDED SOLDERING FOOTPRINT* E2 PIN 5 (EXPOSED PAD) L1 M 2X 0.495 4.560 2X 1.530 G D2 2X BOTTOM VIEW XXXXXX = Specific Device Code A = Assembly Location Y = Year W = Work Week ZZ = Lot Traceability *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. Some products may not follow the Generic Marking. 0.475 3.200 4.530 STYLE 1: PIN 1. SOURCE 2. SOURCE 3. SOURCE 4. GATE 5. DRAIN 1.330 STYLE 2: 2X PIN 1. ANODE 0.905 2. ANODE 3. ANODE 4. NO CONNECT 0.965 5. CATHODE 1 4X 1.000 4X 0.750 1.270 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. DOCUMENT NUMBER: DESCRIPTION: 98AON14036D DFN5 5x6, 1.27P (SO−8FL) Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2018 www.onsemi.com onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com ◊ TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative