NVD5890N
Power MOSFET
40 V, 123 A, Single N−Channel DPAK
Features
•
•
•
•
•
Low RDS(on) to Minimize Conduction Losses
MSL 1/260°C
AEC Q101 Qualified and PPAP Capable
100% Avalanche Tested
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
www.onsemi.com
V(BR)DSS
RDS(on)
ID
40 V
3.7 mW @ 10 V
123 A
Applications
• Motor Drivers
• Pump Drivers for Automotive Braking, Steering and Other High
D
Current Systems
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Symbol
Value
Unit
Drain−to−Source Voltage
VDSS
40
V
Gate−to−Source Voltage
VGS
"20
V
ID
123
A
PD
107
Continuous Drain Current (RqJC)
TC = 25°C
Power Dissipation
(RqJC)
TC = 25°C
Continuous Drain Current (RqJA) (Note 1)
TC = 85°C
Steady
State
tp=10ms
Current Limited by Package
ID
18.5
4.0
W
TA = 25°C
IDM
400
A
TA = 25°C
IDmaxPkg
100
A
TJ, Tstg
−55 to
175
°C
IS
100
A
Drain to Source dV/dt
dV/dt
6.0
V/ns
Single Pulse Drain−to−Source Avalanche Energy (VDD = 32 V, VGS = 10 V,
L = 0.3 mH, IL(pk) = 40 A, RG = 25 W)
EAS
240
mJ
TL
260
°C
Lead Temperature for Soldering Purposes
(1/8″ from case for 10 s)
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
3
CASE 369C
DPAK
(Bent Lead)
STYLE 2
A
24
PD
Source Current (Body Diode)
1 2
W
TA = 25°C
Operating Junction and Storage Temperature
4
95
TA = 85°C
Power Dissipation
(RqJA) (Note 1)
Pulsed Drain Current
TA = 25°C
S
MARKING DIAGRAMS
& PIN ASSIGNMENT
4
Drain
AYWW
58
90NG
Parameter
N−Channel
G
2
1 Drain 3
Gate Source
A
Y
WW
5890N
G
= Assembly Location*
= Year
= Work Week
= Device Code
= Pb−Free Package
* The Assembly Location Code (A) is front side
optional. In cases where the Assembly Location is
stamped in the package bottom (molding ejecter
pin), the front side assembly code may be blank.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 6 of this data sheet.
© Semiconductor Components Industries, LLC, 2012
May, 2017 − Rev. 2
1
Publication Order Number:
NVD5890N/D
NVD5890N
THERMAL RESISTANCE MAXIMUM RATINGS
Symbol
Value
Unit
Junction−to−Case (Drain)
Parameter
RqJC
1.4
°C/W
Junction−to−Ambient − Steady State (Note 1)
RqJA
37
Junction−to−Ambient − Steady State (Note 2)
RqJA
76
1. Surface−mounted on FR4 board using 650 mm2 pad size, 2 oz Cu.
2. Surface−mounted on FR4 board using 36 mm2 pad size.
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Symbol
Test Condition
Min
Drain−to−Source Breakdown Voltage
V(BR)DSS
VGS = 0 V, ID = 250 mA
40
Drain−to−Source Breakdown Voltage
Temperature Coefficient
V(BR)DSS/TJ
Parameter
Typ
Max
Unit
OFF CHARACTERISTICS
Zero Gate Voltage Drain Current
IDSS
Gate−to−Source Leakage Current
V
40
VGS = 0 V,
VDS = 40 V
mV/°C
TJ = 25°C
1.0
TJ = 150°C
100
IGSS
VDS = 0 V, VGS = "20 V
VGS(TH)
VGS = VDS, ID = 250 mA
mA
"100
nA
3.5
V
ON CHARACTERISTICS (Note 3)
Gate Threshold Voltage
Negative Threshold Temperature Coefficient
VGS(TH)/TJ
Drain−to−Source On Resistance
Forward Transconductance
1.5
7.4
mV/°C
RDS(on)
VGS = 10 V, ID = 50 A
2.9
3.7
gFS
VDS = 15 V, ID = 15 A
16.8
S
4975
pF
mW
CHARGES AND CAPACITANCES
Input Capacitance
Ciss
VGS = 0 V, f = 1.0 MHz,
VDS = 12 V
785
VGS = 0 V, f = 1.0 MHz,
VDS = 25 V
4760
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
Input Capacitance
Ciss
Output Capacitance
Coss
Reverse Transfer Capacitance
Crss
385
Total Gate Charge
QG(TOT)
74
Threshold Gate Charge
QG(TH)
Gate−to−Source Charge
QGS
Gate−to−Drain Charge
QGD
16
td(on)
14
VGS = 10 V, VDS = 15 V,
ID = 50 A
490
pF
580
100
nC
5.0
17
SWITCHING CHARACTERISTICS (Note 4)
Turn−On Delay Time
Rise Time
Turn−Off Delay Time
Fall Time
tr
td(off)
VGS = 10 V, VDS = 20 V,
ID = 50 A, RG = 2.0 W
tf
55
35
7.0
3. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%.
4. Switching characteristics are independent of operating junction temperatures.
www.onsemi.com
2
ns
NVD5890N
ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted)
Parameter
Symbol
Test Condition
Min
Typ
Max
Unit
V
DRAIN−SOURCE DIODE CHARACTERISTICS
Forward Diode Voltage
Reverse Recovery Time
Charge Time
Discharge Time
Reverse Recovery Charge
VSD
VGS = 0 V,
IS = 50 A
TJ = 25°C
0.9
1.2
VGS = 0 V,
IS = 20 A
TJ = 25°C
0.8
1.0
tRR
ta
tb
35
VGS = 0 V, dIs/dt = 100 A/ms,
IS = 50 A
QRR
20
15
40
www.onsemi.com
3
ns
nC
NVD5890N
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
10 V
6V
TJ = 25°C
7V
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
TYPICAL PERFORMANCE CURVES
VGS = 5 V
4.5 V
4.2 V
4V
3.8 V
3.6 V
0
1
2
3
4
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
5
300
280
260
240
220
200
180
160
140
120
100
80
60
40
20
0
VDS ≥ 10 V
TJ = 25°C
TJ = 150°C
TJ = −55°C
2
3
4
5
VGS, GATE−TO−SOURCE VOLTAGE (V)
20
Figure 2. Transfer Characteristics
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
RDS(on), DRAIN−TO−SOURCE RESISTANCE (mW)
Figure 1. On−Region Characteristics
TJ = 25°C
18
16
14
ID = 50 A
12
10
8
6
4
2
0
3
4
6
5
7
9
8
10
VGS, GATE−TO−SOURCE VOLTAGE (V)
20
16
14
12
VGS = 5 V
10
8
6
VGS = 10 V
4
2
0
40
0
80
120
160
200
240
280
ID, DRAIN CURRENT (A)
Figure 4. On−Resistance vs. Drain Current and
Gate Voltage
2.0
1000
VGS = 0 V
VGS = 10 V
ID = 50 A
IDSS, LEAKAGE (mA)
RDS(on), NORMALIZED DRAIN−TO−SOURCE
RESISTANCE (mW)
TJ = 25°C
18
Figure 3. On−Resistance vs. Drain Current
1.75
6
1.5
1.25
1.0
100
TJ = 175°C
TJ = 150°C
10
0.75
0.5
−50
−25
0
25
50
75
100
125
150
175
1
0
TJ, JUNCTION TEMPERATURE (°C)
4
8
12
16
20
24
28
32
36
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
Figure 5. On−Resistance Variation with
Temperature
Figure 6. Drain−to−Source Leakage Current
vs. Voltage
www.onsemi.com
4
40
NVD5890N
C, CAPACITANCE (pF)
6000
VGS = 0 V
TJ = 25°C
f = 1 MHz
Ciss
5000
4000
3000
2000
Coss
1000
0
Crss
0
5
10
15
20
25
30
35
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
0
20
VGS, GATE−TO−SOURCE VOLTAGE (V)
7000
40
QT
QDS
QGS
VDS = 15 V
ID = 50 A
TJ = 25°C
20
10
40
30
50
60
70
5
0
80
Qg, TOTAL GATE CHARGE (nC)
Figure 8. Gate−to−Source and
Drain−to−Source Voltage vs. Total Charge
Figure 7. Capacitance Variation
100
1000
VGS = 10 V
VDD = 20 V
ID = 50 A
IS, SOURCE CURRENT (A)
td(off)
tf
tr
100
td(on)
10
1
10
100
TJ = 150°C
10
100°C
1
0.1
0.3
0.4
0.5
25°C
0.6
0.7
TJ = −55°C
0.8
0.9
1.0
1.1
RG, GATE RESISTANCE (W)
VSD, SOURCE−TO−DRAIN VOLTAGE (V)
Figure 9. Resistive Switching Time Variation
vs. Gate Resistance
Figure 10. Diode Forward Voltage vs. Current
1000
I D, DRAIN CURRENT (AMPS)
t, TIME (ns)
VGS
10
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
1
15
VDS
VDS, DRAIN−TO−SOURCE VOLTAGE (V)
TYPICAL PERFORMANCE CURVES
10 ms
100
100 ms
10
1
0.1
VGS ≤ 20 V
SINGLE PULSE
TC = 25°C
1 ms
10 ms
RDS(on) LIMIT
THERMAL LIMIT
PACKAGE LIMIT
1
dc
10
VDS, DRAIN−TO−SOURCE VOLTAGE (VOLTS)
Figure 11. Maximum Rated Forward Biased
Safe Operating Area
www.onsemi.com
5
100
1.2
NVD5890N
r(t), EFFECTIVE TRANSIENT THERMAL RESPONSE (°C/W)
TYPICAL PERFORMANCE CURVES
10
1.0
D = 0.5
0.2
0.1
0.1
0.05
0.02
0.01
0.01
SINGLE PULSE
0.001
0.000001
0.00001
RqJC = 1.4°C/W
Steady State
0.0001
0.001
0.01
t, TIME (s)
0.1
1
10
100
1000
Figure 12. Thermal Response
ORDERING INFORMATION
Package
Shipping†
NVD5890NT4G
DPAK
(Pb−Free)
2500/Tape & Reel
NVD5890NT4G−VF01
DPAK
(Pb−Free)
2500/Tape & Reel
Order Number
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
www.onsemi.com
6
NVD5890N
PACKAGE DIMENSIONS
DPAK (SINGLE GAUGE)
CASE 369C
ISSUE F
A
E
b3
B
c2
Z
D
1
L4
C
A
4
L3
2
NOTE 7
c
SIDE VIEW
b
TOP VIEW
H
DETAIL A
3
b2
e
0.005 (0.13)
M
GAUGE
PLANE
C
Z
C
L
L1
DETAIL A
DIM
A
A1
b
b2
b3
c
c2
D
E
e
H
L
L1
L2
L3
L4
Z
BOTTOM VIEW
H
L2
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: INCHES.
3. THERMAL PAD CONTOUR OPTIONAL WITHIN DIMENSIONS b3, L3 and Z.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS, OR BURRS. MOLD
FLASH, PROTRUSIONS, OR GATE BURRS SHALL
NOT EXCEED 0.006 INCHES PER SIDE.
5. DIMENSIONS D AND E ARE DETERMINED AT THE
OUTERMOST EXTREMES OF THE PLASTIC BODY.
6. DATUMS A AND B ARE DETERMINED AT DATUM
PLANE H.
7. OPTIONAL MOLD FEATURE.
Z
SEATING
PLANE
BOTTOM VIEW
A1
ALTERNATE
CONSTRUCTIONS
ROTATED 905 CW
2.58
0.102
5.80
0.228
3.00
0.118
1.60
0.063
MILLIMETERS
MIN
MAX
2.18
2.38
0.00
0.13
0.63
0.89
0.72
1.14
4.57
5.46
0.46
0.61
0.46
0.61
5.97
6.22
6.35
6.73
2.29 BSC
9.40 10.41
1.40
1.78
2.90 REF
0.51 BSC
0.89
1.27
−−−
1.01
3.93
−−−
STYLE 2:
PIN 1. GATE
2. DRAIN
3. SOURCE
4. DRAIN
SOLDERING FOOTPRINT*
6.20
0.244
INCHES
MIN
MAX
0.086 0.094
0.000 0.005
0.025 0.035
0.028 0.045
0.180 0.215
0.018 0.024
0.018 0.024
0.235 0.245
0.250 0.265
0.090 BSC
0.370 0.410
0.055 0.070
0.114 REF
0.020 BSC
0.035 0.050
−−− 0.040
0.155
−−−
6.17
0.243
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
◊
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NVD5890N/D