SB05-05C-TB-E

Ordering number : ENA0409A SB05-05C Schottky Barrier Diode http://onsemi.com 50V, 0.5A, Low IR, Single CP Applications • High frequency rectification (switching regulators, converters, choppers) Features • • • • Fast reverse recovery time (trr max=10ns) Low forward voltage (VF max=0.55V) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings Unit VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 50Hz sine wave, 1 cycle 50 V 55 V 500 mA 5 A Tj --55 to +125 °C Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7013A-004 • Package : CP • JEITA, JEDEC : SC-59, TO-236, SOT-23, TO-236AB • Minimum Packing Quantity : 3,000 pcs./reel 0.1 SB05-05C-TB-E Packing Type: TB Marking 1.5 3 1.1 0.4 1 : Anode 2 : No Contact 3 : Cathode CP 0.3 B TB 0.05 0.95 2 LOT No. 1 LOT No. 0.5 2.5 0.5 2.9 Electrical Connection 3 1 Semiconductor Components Industries, LLC, 2013 September, 2013 2 71812 TKIM/42506SB MSIM TB-00000745 No.A0409-1/6 SB05-05C Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current min IR=200μA, Tj=25°C IF=500mA, Tj=25°C typ C Reverse Recovery Time trr Rth(j-a)1 V 0.55 V 50 μA 17 pF IF=IR=100mA, Tj=25°C, See specified Test Circuit. 10 Mounted in Cu-foiled area of 16mm2×0.2mm Rth(j-a)2 Unit max 50 VR=25V, Tj=25°C VR=10V, f=1MHz Interterminal Capacitance Thermal Resistance Ratings Conditions on glass epoxy board ns 420 °C / W 330 °C / W Duty≤10% 50Ω 100Ω 10Ω 10μs 10mA 100mA 100mA trr Test Circuit 5V trr Ordering Information Device Package Shipping memo CP 3,000pcs./reel Pb Free SB05-05C-TB-E IF -- VF 5 2 3 °C Ta=125 1000 1.0 7 5 Reverse Current, IR -- μA 2 = Ta 3 °C C 5° 12 25 Forward Current, IF -- A IR -- VR 5 2 0.1 7 5 3 5 100°C 2 100 75°C 5 2 50°C 10 5 25°C 2 1.0 5 2 2 0.1 0.01 0 0.2 0.4 0.6 0.8 500 (4) Rectangular wave (3) (2) (1) θ 360° Sine wave 100 180° 360° 0 0 100 200 40 50 60 70 ID00340 C -- VR f=1MHz 400 200 30 2 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 300 20 Reverse Voltage, VR -- V PF(AV) -- IO 600 10 ID00339 300 400 Average Output Current, IO -- A 500 600 ID00341 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- mW 0 1.2 1.0 Forward Voltage, VF -- V 100 7 5 3 2 10 7 5 3 1.0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 ID00342 No.A0409-2/6 SB05-05C IFSM -- t Surge Forward Current, IFSM(Peak) -- A 7 Current waveform 50Hz sine wave 6 IS 20ms t 5 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00343 No.A0409-3/6 SB05-05C Embossed Taping Specification SB05-05C-TB-E No.A0409-4/6 SB05-05C Outline Drawing SB05-05C-TB-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.0 0.8 0.95 0.95 No.A0409-5/6 SB05-05C ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.A0409-6/6