SB05-05P-TD-E

Ordering number : EN2999C SB05-05P Schottky Barrier Diode http://onsemi.com 50V, 0.5A, Low IR, Single PCP Applications • High frequency rectification (switching regulators, converters, choppers) Features • • • • Fast reverse recovery time (trr max=10ns) Low forward voltage (VF max=0.55V) Low switching noise Low leakage current and high reliability due to highly reliable planar structure Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Conditions Ratings VRRM VRSM Surge Forward Current IO IFSM Junction Temperature Storage Temperature 50Hz sine wave, 1 cycle Unit 50 V 55 V 500 mA 5 A Tj --55 to +125 °C Tstg --55 to +125 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7007B-001 • Package : PCP • JEITA, JEDEC : SC-62, SOT-89, TO-243 • Minimum Packing Quantity : 1,000 pcs./reel SB05-05P-TD-E 4.5 1.6 Marking SB Packing Type: TD 4.0 1.0 2.5 1.5 LOT No. Top View TD 1 2 3 0.4 0.4 0.5 Electrical Connection 1.5 3.0 0.75 1 2 3 1 : Anode 2 : Cathode 3 : No Contact Bottom View PCP Semiconductor Components Industries, LLC, 2013 September, 2013 72512 TKIM/62005SB MSIM TB-00001395/33098 HA (KT)/92995 GI (KOTO)/D288 TA, TS No.2999-1/6 SB05-05P Electrical Characteristics at Ta=25°C Parameter Symbol Reverse Voltage VR VF IR Forward Voltage Reverse Current Conditions IR=200μA IF=500mA typ max 50 VR=25V VR=10V, f=1MHz 50 C Reverse Recovery Time trr Rth(j-a)1 IF=IR=100mA, See specified Test Circuit. Rth(j-a)2 When mounted on ceramic substrate (250mm2×0.8mm) Unit V 0.55 Interterminal Capacitance Thermal Resistance Ratings min 18 V μA pF 10 ns 310 °C / W 120 °C / W trr Test Circuit 100Ω 10μs 10Ω 100mA 50Ω 10mA 100mA Duty≤10% --5V trr Ordering Information Device SB05-05P-TD-E Package Shipping memo PCP 1,000pcs./reel Pb Free No.2999-2/6 SB05-05P IF -- VF 5 2 3 °C Ta=125 1000 Reverse Current, IR -- μA 2 1.0 7 5 C 5° 2 =1 Ta 3 25 °C Forward Current, IF -- A IR -- VR 5 2 0.1 7 5 3 5 100°C 2 100 75°C 5 2 50°C 10 5 25°C 2 1.0 5 2 2 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 (4) Rectangular wave (3) (2) (1) θ 360° 200 Sine wave 100 180° 360° 0 0 200 100 300 400 500 600 ID00351 IFSM -- t 7 30 40 50 60 70 ID00350 C -- VR f=1MHz 400 300 20 2 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° 500 10 Reverse Voltage, VR -- V PF(AV) -- IO 600 Average Output Current, IO -- mA Surge Forward Current, IFSM(Peak) -- A 0 1.2 ID00349 Interterminal Capacitance, C -- pF Average Forward Power Dissipation, PF(AV) -- mW Forward Voltage, VF -- V 100 7 5 3 2 10 7 5 3 1.0 2 3 5 7 10 2 3 Reverse Voltage, VR -- V 5 7 100 ID00352 Current waveform 50Hz sine wave 6 IS 20ms 5 t 4 3 2 1 0 7 0.01 2 3 5 7 0.1 2 Time, t -- s 3 5 7 1.0 2 3 ID00353 No.2999-3/6 SB05-05P Embossed Taping Specification SB05-05P-TD-E No.2999-4/6 SB05-05P Outline Drawing SB05-05P-TD-E Land Pattern Example Mass (g) Unit 0.058 mm * For reference Unit: mm 0.9 2.2 3.7 45° 45° 1.0 1.8 1.5 1.0 1.5 3.0 No.2999-5/6 SB05-05P ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.2999-6/6