OPV200

Vertical Cavity Surface Emitting Laser in TO-46 Package Features • 850nm VCSEL Technology • High thermal stability • Low drive current/high output density • Narrow and concentric beam angle • Up to 1.25 Gbps • Recommended for multimode fiber applications • Flat Window • Burned in for communication level reliability • Recommended for external lens applications • Suitable for sensing applications Description The OPV200 is a high performance 850nm VCSEL packaged for high speed communication links. This product’s combination of features including high speed, high output power and concentric beam makes it an ideal transmitter for integration into many types of data communications equipment. Applications include: Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Maximum Reverse Voltage Storage Temperature Operating Temperature Soldering Lead Temperature Max. Continuous Optical Power at 70°C 5 Volts -40 to +125°C -40 +85° C 260° C for 10 Seconds 1.1 mW ♦ ♦ ♦ ♦ ♦ ♦ Fibre Channel Gigabit Ethernet ATM VSR (Very Short Reach) Intra-system links Optical backplane interconnects. ! # % % $ " $ $ Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com OPV200 Technical Data Electrical/Optical Characteristics (at 25 C unless otherwise specified) SYMBOL POT ITH VF IR RS η PARAMETER Power Out Total Threshold Current Forward Voltage Reverse Current, VCSEL Series Resistance Slope Efficiency Linearity MIN TYP MAX UNITS 1.45 2.0 4.5 5.5 2.15 30 15 0.17 0.0 830 850 860 0.85 12 200 -123 ±1.5 0.06 -2.5 -0.4 nm nm Degree ps db/Hz mA %/° C mV/° C %/C 40 mW mA V nA ohms mW/mA Note1 TEST CONDITION IF = 12 mA IF = 12 mA VR = 5 V Note 2 Note 3 Note 4 λ ∆λ θ tr/tf NRI ∆lTH/∆T ∆λ/∆T ∆VF∆T ∆η/∆T NOTES: (1) (2) (3) (4) W avelength Optical Bandwidth Beam Divergence Rise and Fall Time Relative Intensity Noise Temp Coefficient of Threshold Current Temp Coefficient of Wavelength Temperature Coefficient for VF Temperature Coefficient for Efficiency IF = 12 mA 20% to 80% 0° - 70° C, Note 1 0° - 70° C, IF = 12 mA 0° - 70° C, IF = 12 mA 0° - 70° C, Note 3 Threshold Current is based on the two line intersection method specified in Telcordia GR-468-Core. Line 1 from 6 mA to 8 mA. Line 2 from 0 mA to 2 mA. Series Resistance is the slope of the Voltage-Current line from 8 to 12 mA. Slope efficiency, is the slope of the best fit LI line from 8 mA to 12 mA. Using data points taken for slope efficiency above, delta L/delta I shall be calculated for each adjacent pair of .5mA points. The minimum shall be 0.0. (No negative values permitted). Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com OPV200 Technical Data Output Power vs. Forward Current 1.4 1.2 0C Normalized Output Power (12mA, 25 1.0 0.8 0.6 0.4 0.2 0.0 25 C 70 C 0 1 2 3 4 5 Forward Current (mA) 6 7 8 9 10 11 12 13 14 15 Forward Voltage vs. Forward Current 2.2 0C 2.0 25 C Forward Voltage (V) 1.8 70 C 1.6 1.4 1.2 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Forward Current (mA) Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com OPV200 Technical Data $ & $ & 1) Tolerances are ±0.005 unless otherwise specified OPV200 Pin 1 2 3 Connection VCSEL Anode VCSEL Cathode N/C Optek reserves the right to make changes at any time in order to improve design and to supply the best product possible. Optek Technology, Inc. Carrollton, Texas 75006 (972) 323-2200 sensors@optekinc.com www.optekinc.com