OVLHRKD8

Oval Red LED Lamp (5 mm) OVLHRKD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLHRKD8 is designed for superior performance in outdoor environments. Its radiation pattern matches blue (OVLHBKD8), orange (OVLHQKD8) and green (OVLHGKD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable message signs x Indoor/outdoor advertising signage x Traffic and highway signs x Full-color video signs Part Number OVLHRKD8 Material AlInGaP Emitted Color Red Intensity Typ. mcd 950 Lens Color Red Diffused 1 ANODE 2 CATHODE RoHS Moisture DO NOT LOOK DIRECTLY AT LED WITH UNSHIELDED EYES OR DAMAGE TO RETINA MAY OCCUR. OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com Issue A 10/05 Page 1 of 3 Oval Red LED Lamp (5 mm) OVLHRKD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb)1 Electrostatic Discharge Classification (ESD) (MIL-STD-883E) 2 -40 ~ +100° C -40 ~ +95° C 5V 50 mA 200 mA 130 mW 260° C Class 1 Peak Forward Current (10% Duty Cycle, 1KHz) Notes: 1. Solder time less than 3 seconds at temperature extreme. 2. For long-term performance, the drive currents between 10 mA and 30 mA are recommended. Please contact an OPTEK sales representative for more information on recommended drive conditions. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 550 ------618 ------- TYP 900 2.1 ---624 110 50 MAX ---2.6 100 630 ------- UNITS CONDITIONS IF = 20 mA IF = 20 mA VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA mcd V µA nm deg deg 2 ½H-H 2 ½V-V Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLHRKD8 may be filled with any or all bins contained as below. Luminous Intensity (mcd) 1100–1520 770–1100 550–770 618 T S R Luminous intensity is at R bin or above. Dominant Wavelength (nm) 630 Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content