OVLJRGD8

Oval Red LED Lamp (4mm) OVLJRGD8 x x x x x High luminous intensity Defined spatial radiation Multiple viewing angles UV-resistant epoxy Precision optical performance Product Photo Here The OVLJRGD8 is designed for superior performance in outdoor environments. Its radiation pattern matches green (OVLJGGD8) and blue (OVLJBGD8) devices in identical packages to create LED pixels for full-color video screens. Applications x Variable Message Signs x Indoor/Outdoor Advertising Signage x Traffic and Highway Signs x Full-Color Video Signs Part Number OVLJRGD8 Material AlInGaP Emitted Color Red Intensity Typ. mcd 400 Lens Color Red Diffused RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.0 0505 Page 1 Oval Red LED Lamp (4mm) OVLJRGD8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Reverse Voltage Continuous Forward Current Power Dissipation Lead Soldering Temperature (3mm from the base of the epoxy bulb) 2 1 -40 ~ +100 ° C -40 ~ +95 ° C 5V 50 mA 200 mA 125 mW 260° C Peak Forward Current (10% Duty Cycle, 1KHz) Notes: 1. For long term performance the drive currents between 10mA and 30mA are recommended. Please contact an Optek sales representative for more information on recommended drive conditions. 2. Solder time less than 3 seconds at temperature extreme. Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL Iv VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle MIN 280 ------620 ------- TYP 400 2.0 ---624 100 50 MAX ---2.5 100 628 ------- UNITS CONDITIONS IF = 20mA IF = 20mA VR = 5V IF = 20mA IF = 20mA IF = 20mA mcd V µA nm deg deg 2 ½H-H 2 ½V-V Standard Bins (IF = 20mA) Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVLJRGD8 may be filled with any or all bins contained as below. Luminous Intensity (mcd) 550 390 280 620 Q P Luminous intensity is at P bin or above. Dominant Wavelength (nm) 628 Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. 3. Pb content