OVSAABC2R8

Amber PLCC4 Surface Mount LED OVSAABC2R8 x x x x x High intensity with low power consumption White PLCC4 packaged in 8mm tape on 7” diameter reel Compatible with automatic placement equipment Dimensions: 3.5x2.8x1.95mm 120° viewing angle Product Photo Here The OVSAABC2R8 is designed for wide angle, uniform light output. Its internal reflector and colorless clear lens optimize luminous intensity and make it ideal for backlighting applications and for coupling with light guides. Applications x Traffic Lights x Signal and Symbol Luminaire x Mono-color Indicators x Backlighting (LCD, Switches, Displays, Illuminated Advertising) x Interior Automotive Lighting (Instrumentation Clusters) x Safety Marker Lights (Steps, Exit Ways) Part Number OVSAABC2R8 Material AlInGaP Emitted Color Amber Intensity Typ. mcd 700 Lens Color W ater Clear RoHS Data is subject to change without prior notice. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.1 0705 Page 1 Amber PLCC4 Surface Mount LED OVSAABC2R8 Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range Operating Temperature Range Junction Temperature Junction/Ambient 1 -40 ~ +100° C -40 ~ +100° C 110° C 300° C/W 150° C/W 5V 70 mA 200 mA 225 mW Junction/Solder Point Reverse Voltage Continuous Forward Current Peak Forward Current (10% Duty Cycle, PW ”  —VHF Power Dissipation Note: 1. Rth test condition: Mounted on PC board FR 4 (pad size Electrical Characteristics TA = 25o C unless otherwise noted SYMBOL IV VF IR D PARAMETER Luminous Intensity Forward Voltage Reverse Current Dominant Wavelength 50% Power Angle 2 ½ Lamps are sorted to luminous intensity (IV) and dominant wavelength ( D) bins shown. Orders for OVSAABC2R8 may be filled with any or all bins contained as below. X2 1120 X3 X4 X5 Standard Bins (IF = 50mA) Luminous Intensity (mcd) 900 710 560 450 584 587 590 593 Dominant Wavelength (nm) Important Notes: 1. All ranks will be included per delivery, rank ratio will be based on the chip distribution. 2. To designate luminous intensity ranks, please contact OPTEK. Issue 1.1 Page 2 0705 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com ¥§¦¤¢  ¥£¡ MIN 450 ------584 ---- 2 ) TYP 700 2.6 ---591 120 MAX ---3.2 10 596 ---- UNITS mcd V µA nm deg CONDITIONS IF =50mA IF =50mA VR = 5V IF =50mA IF =50mA V2 V1 U2 U1 596 Luminous intensity is at U1 bin or above. Amber PLCC4 Surface Mount LED OVSAABC2R8 Typical Electro-Optical Characteristics Curves mA % Forward Current vs. Forward Voltage V Relative Luminous Intensity vs. Forward Current mA Half Power W L = 20nm mA nm ° C Relative Luminous Intensity vs. Wavelength Maximum Forward DC Current vs. Ambient Temperature v 50% Power Angle: 120° A Spatial Distribution Reverse Current vs. Reverse Voltage OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.1 0705 Page 3 Amber PLCC4 Surface Mount LED OVSAABC2R8 Reel Dimensions (7 Inch) Carrier Tape Dimensions: Loaded Quantity 2000 PCS per Reel Moisture Resistant Packaging Label Aluminum Moisture-proof Bag Desiccant Bar Code Label Issue 1.1 Page 4 0705 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Amber PLCC4 Surface Mount LED OVSAABC2R8 Issue Change Description Approval Date 1.0 Initial Release J. Haynie July 29, 2005 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 visibleLED@optekinc.com www.optekinc.com Issue 1.1 0705 Page 5