TCG070WVLPEANN-AN50

Spec No. Date  SPEC TQ3C-8EAF0-E1YAA125-01 September 24, 2014 TYPE : TCG070WVLPEANN-AN50 < 7.0 inch WVGA transmissive color TFT with LED backlight > CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. Application Construction and outline Mechanical specifications Absolute maximum ratings Electrical characteristics Optical characteristics Interface signals Input timing characteristics Backlight characteristics Lot number identification Warranty Precautions for use Reliability test data Outline drawing Nov 4, 2014 KYOCERA DISPLAY CORPORATION This specification is subject to change without notice. Consult Kyocera before ordering.    Original Issue Date July 23, 2013 Designed by: Engineering dept. Prepared Checked Confirmed by: QA dept. Approved Checked Approved Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. Page TCG070WVLPEANN-AN50 Warning 1. This Kyocera LCD module has been specifically designed for use only in electronic devices and industrial machines in the area of audio control, office automation, industrial control, home appliances, etc. The module should not be used in applications where the highest level of safety and reliability are required and module failure or malfunction of such module results in physical harm or loss of life, as well as enormous damage or loss. Such fields of applications include, without limitation, medical, aerospace, communications infrastructure, atomic energy control. Kyocera expressly disclaims any and all liability resulting in any way to the use of the module in such applications. 2. Customer agrees to indemnify, defend and hold Kyocera harmless from and against any and all actions, claims, damages, liabilities, awards, costs, and expenses, including legal expenses, resulting from or arising out of Customer's use, or sale for use, or Kyocera modules in applications. Caution 1. Kyocera shall have the right, which Customer hereby acknowledges, to immediately scrap or destroy tooling for Kyocera modules for which no Purchase Orders have been received from the Customer in a two-year period. - Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Revision record Designed by : Engineering dept. Prepared Checked Approved Date TCG070WVLPEANN-AN50 Confirmed by : QA dept. Checked Approved September 24, 2014 Rev.No. Date Page 01 Sep 24, 2014 17 Descriptions 9.Backlight characteristics change Operating life time Typ70,000h Ѝ100,000㹦 Page - Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 1 1. Application This document defines the specification of TCG070WVLPEANN-AN50. (RoHS Compliant) 2. Construction and outline : Transmissive color dot matrix type TFT : LED : Anti-Glare treatment : LVDS : Timing controller, Power supply (3.3V input) Without Constant current circuit for LED Backlight LCD Backlight system Polarizer Interface Additional circuit 3. Mechanical specifications Item Specification Unit 165(W)×(104.4)(H)×8.6(D) mm Active area 152.4(W)×91.44(H) (17.8cm/7.0 inch(Diagonal)) mm Dot format 800×(R,G,B)(W)×480(H) dot 0.0635(W)×0.1905(H) mm Normally White - 205 g Outline dimensions 1) Dot pitch Base color Mass 2) 1) Projection not included. Please refer to outline for details. 2) Due to the characteristics of the LCD material, the color varies with environmental temperature. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 2 4. Absolute maximum ratings 4-1. Electrical absolute maximum ratings Item Symbol Min. Max. Unit Supply voltage(+3.3V) VDD -0.3 4.0 V RxINi+, RxINi- 1) Input signal CK IN+, CK INvoltage 2) SELLVDS, BITSEL, SC VI1 -0.3 2.8 V VI2 -0.3 2.8 V VI3 -0.3 VDD+0.5 V 1) i=0,1,2,3 2) VDD must be supplied correctly within the range described in 5-1. 4-2. Environmental absolute maximum ratings Item Symbol Min. Max. Unit Operating temperature 1) TOP -20 70 °C Storage temperature 2) TSTO -30 80 °C Operating humidity 3) HOP 10 4) %RH Storage humidity 3) HSTO 10 4) %RH Vibration - 5) 5) - Shock - 6) 6) - 1) Operating temperature means a temperature which operation shall be guaranteed. Since display performance is evaluated at 25°C, another temperature range should be confirmed. 2) Temp. = -30°C㸺48h , Temp. = 80°C㸺168h    Store LCD at normal temperature/humidity. Keep them free from vibration and shock. An LCD that is kept at a low or a high temperature for a long time can be defective due to other conditions, even if the low or high temperature satisfies the standard.  (Please refer to “Precautions for Use” for details.) 3) 4)    5) Non-condensing Temp.ӌ40°C, 85%RH Max. Temp.㸼40°C, Absolute humidity shall be less than 85%RH at 40°C.  Frequency 10㹼55 Hz Vibration width 0.15mm Interval 10-55-10 Hz Acceleration value (0.3㹼9 m/s2)  㸯minutes        2 hours in each direction X, Y, Z (6 hours total)        EIAJ ED-2531 6) Acceleration: 490 m/s2, Pulse width: 11 ms 3 times in each direction: ±X, ±Y, ±Z    EIAJ ED-2531 M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page 3 TCG070WVLPEANN-AN50 5. Electrical characteristics              Item Temp. = -20㹼70°C     Symbol Condition Min. Typ. Max. Unit VDD - 3.0 3.3 3.6 V Current consumption IDD 2) - 200 260 mA Permissive input ripple voltage VRP VDD=3.3V - - 100 mVp-p VIL "Low" level 0 - 0.8 V VIH "High" level 2.0 - VDD V IOL VI3=0V -10 - 10 ȣA IOH VI3=3.3V - - 400 ȣA Supply voltage Input signal voltage 1) 3) Input reek current LVDS Input voltage 4) VL - 0 - 1.9 V Differential input voltage 4) VID - 250 350 450 mV Differential input threshold voltage 4) 5) VTL "Low" level VCM-100 - - mV VTH "High" level - - VCM+100 mV R1 - - 100 - Ȑ t1 - 0.1 - 10 ms t2 - 0 - - ms t3 - 0 - - ms t4 - 1.0 - - s t5 - 200 - - ms t6 - 200 - - ms t7 - 0 - 10 s t8 - 0 - - ms Terminator VDD-turn-on conditions 1) 1) VDD-turn-on conditions                      LED ON M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 TCG070WVLPEANN-AN50 2) Display pattern: VDD = 3.3V, Temp. = 25°C 123 456  1 2 3 : : : 479 480 (dot) ࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭࣭2398 2399 2400(dot) ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ ‫ڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦڦ‬ 3) Input signal : SELLVDS, BITSEL, SC 4) Input signal : RxIN3+, RxIN3-, RxIN2+, RxIN2-, RxIN1+, RxIN1-, RxIN0+, RxIN0CK IN+, CK IN- 㼂㻵㻰 㼂㻸 㼂㻯㻹 㻜㼂 5) VCM : LVDS Common mode voltage (VCM=1.25V) 6) Please power on LVDS transmitter at the same time as VDD, or LVDS transmitter should be powered on first. M407011                                Page 4 Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page 5 TCG070WVLPEANN-AN50 6. Optical characteristics            Item Response time Measuring spot =ȭ6.0mm, Temp. = 25°C         Symbol Condition Min. Typ. Max. Unit Rise Ǖr ȟ=ȭ=0° - 5 - ms Down Ǖd ȟ=ȭ=0° - 25 - ms ȟUPPER - 60 - ȟLOWER - 80 - - 80 - - 80 - Viewing angle range View direction : 12 o’clock (Gray inversion) CRӍ10 ȭLEFT 䃥RIGHT Contrast ratio Brightness ȟ=ȭ=0° 700 1000 - - L IF=60mA/Line 490 700 - cd/m2 0.550 0.600 0.650 0.300 0.350 0.400 0.270 0.320 0.370 0.500 0.550 0.600 0.100 0.150 0.200 0.070 0.120 0.170 0.240 0.290 0.340 0.255 0.305 0.355 y x Green y Chromaticity coordinates x Blue y x White y ȟ=ȭ=0° ȟ=ȭ=0° ȟ=ȭ=0° ȟ=ȭ=0° 6-1. Definition of contrast ratio CR(Contrast ratio) 㸻 Brightness with all pixels "White" Brightness with all pixels "Black" 6-2. Definition of response time :KLWH %ODFN     %ULJKWQHVV :KLWH ȫU deg. CR x Red deg. ȫG M407011                                - Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 6-3. Definition of viewing angle ȭ r ȟ833(5 \ ȟ r \ ȟ/2:(5 ȭ/()7 [ [ ȭ5,*+7 [ [ \ \ ȭGLUHFWLRQ ȟGLUHFWLRQ 6-4. Brightness measuring points 200×3 120 1 600×3 (dot) 4 3 240 360 400×3 2 5 (dot) 1) Rating is defined as the white brightness at center of display screen(3). 2) 5 minutes after LED is turned on. (Ambient Temp.=25Υ) M407011                                6 Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page 7 TCG070WVLPEANN-AN50 7. Interface signals 7-1. Interface signals No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol BITSEL SELLVDS GND GND RxIN3+ RxIN3GND CK IN+ CK INGND RxIN2+ RxIN2GND RxIN1+ RxIN1GND RxIN0+ RxIN0GND GND VDD VDD SC NC NC NC AN1 AN2 CN1 CN2                                 LCD connector   Matching connector Description Bit data select signal(GND or Open: 8bit modeࠊHigh: 6bit mode) Mode select signal(LVDS Data mapping) GND GND LVDS receiver signal CH3(+) LVDS receiver signal CH3(-) GND LVDS receiver signal CK(+) LVDS receiver signal CK(-) GND LVDS receiver signal CH2(+) LVDS receiver signal CH2(-) GND LVDS receiver signal CH1(+) LVDS receiver signal CH1(-) GND LVDS receiver signal CH0(+) LVDS receiver signal CH0(-) GND GND +3.3V power supply +3.3V power supply Scan direction control(High or Open: NormalࠊGND: Reverse) NC NC NC Anode1 Anode2 Cathode1 Cathode2 㸸 MDF76GW-30S-1H(55) 㸸 MDF76-30P-1C (HIROSE) (HIROSE)   LVDS receiver 㸸 Embedded in ASIC Matching LVDS transmitter 㸸 THC63LVDM83R(THine Electronics) or compatible 1) Scanning SC : High or Open SC : GND M407011                                Note LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS LVDS 1) Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 7-2. Data mapping (6bit input / 8bit mode)  1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible) Transmitter 1Pin BITSEL = "L" or OPEN 1Pin BITSEL = "L" or OPEN 2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H" Pin No. Data 㸫 R0(LSB) 51 TA0 TA1 㸫 R1 52 TA2 㸫 R2 54 TA3 㸫 R3 55 TA4 㸫 R4 56 TA5 㸫 3 R5(MSB) TA6 㸫 G0(LSB) 4 㸫 G1 6 TB0 TB1 㸫 G2 7 TB2 㸫 G3 11 TB3 㸫 G4 12 TB4 㸫 14 G5(MSB) TB5 㸫 B0(LSB) 15 TB6 㸫 B1 19 㸫 B2 20 TC0 TC1 㸫 B3 22 TC2 㸫 B4 23 TC3 㸫 24 B5(MSB) TC4 㸫 (HS) 27 TC5 㸫 (VS) 28 TC6 㸫 DE 30 㸫 GND 50 TD0 TD1 㸫 GND 2 TD2 GND 㸫 8 TD3 GND 㸫 10 TD4 GND 㸫 16 TD5 GND 㸫 18 TD6 㸫 25 GND   BITSEL=L(GND) or OPEN SELLVDS=H(3.3V) 1 CYCLE     R1 G0 R5 R4 R3 R2 R1 R0 G0 G1 B1 B0 G5 G4 G3 G2 G1 B1 B2 DE (VS) (HS) B5 B4 B3 B2 DE   DE㸸DATA ENABLE  HS㸸HSYNC  VS㸸VSYNC M407011                                8 Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. TCG070WVLPEANN-AN50  2) Block Diagram BITSEL=L(GND) or OPEN   SELLVDS=H(3.3V)   ͤSELLVDS signal line has 10㹩Ȑ pulldown resister. M407011                                Page 9 Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. TCG070WVLPEANN-AN50 Page 10 When using ͆6-bit Transmitter͇, please connect the unused channel of the control IC receiver as described in the diagram below. ͤSELLVDS signal line has 10㹩Ȑ pulldown resister. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 7-3. Data mapping (8bit input / 8bit mode)  1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible) Transmitter 1Pin BITSEL = "L" or OPEN 1Pin BITSEL = "L" or OPEN 2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H" Pin No. Data R0(LSB) R2 51 TA0 TA1 R1 R3 52 TA2 R2 R4 54 TA3 R3 R5 55 TA4 R4 R6 56 TA5 R5 3 R7(MSB) TA6 G0(LSB) G2 4 G1 G3 6 TB0 TB1 G2 G4 7 TB2 G3 G5 11 TB3 G4 G6 12 TB4 G5 14 G7(MSB) TB5 B0(LSB) B2 15 TB6 B1 B3 19 B2 B4 20 TC0 TC1 B3 B5 22 TC2 B4 B6 23 TC3 B5 24 B7(MSB) TC4 (HS) (HS) 27 TC5 (VS) (VS) 28 TC6 DE DE 30 R6 R0(LSB) 50 TD0 TD1 R7(MSB) R1 2 TD2 G6 G0(LSB) 8 TD3 G7(MSB) G1 10 TD4 B6 B0(LSB) 16 TD5 B7(MSB) B1 18 TD6 (NA) 25 (NA) BITSEL=L(GND) or OPEN SELLVDS=L(GND) or OPEN 1 CYCLE R1 R0 G0 R5 R4 R3 R2 R1 R0 G0 G2 G1 B1 B0 G5 G4 G3 G2 G1 B1 B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE 㻾㻣 㻾㻢 㻺㻭 㻮㻣 㻮㻢 㻳㻣 㻳㻢 㻾㻣 㻾㻢 㻺㻭    DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC M407011                                11 Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 TCG070WVLPEANN-AN50 BITSEL=L(GND) or OPEN SELLVDS=H(3.3V) 1 CYCLE   R3 R2 G2 R7 R6 R5 R4 R3 R2 G2 G4 G3 B3 B2 G7 G6 G5 G4 G3 B3 B5 B4 DE (VS) (HS) B7 B6 B5 B4 DE 㻾㻝 㻾㻜 㻺㻭 㻮㻝 㻮㻜 㻳㻝 㻳㻜 㻾㻝 㻾㻜 㻺㻭 DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC  2) Block Diagram BITSEL=L(GND) or OPEN SELLVDS=L(GND) or OPEN   ͤSELLVDS signal line has 10㹩Ȑ pulldown resister. M407011                                Page 12 Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. TCG070WVLPEANN-AN50 BITSEL=L(GND) or OPEN SELLVDS=H(3.3V)   ͤSELLVDS signal line has 10㹩Ȑ pulldown resister. M407011                                Page 13 Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 TCG070WVLPEANN-AN50 7-4. Data mapping (6bit input / 6bit mode)  1) Location of BITSEL, SELLVDS (THC63LVDM83R(THine Electronics) or compatible) Transmitter 1Pin BITSEL = "H" 1Pin BITSEL = "H" 2Pin SELLVDS = "L" or OPEN 2Pin SELLVDS = "H" Pin No. Data 㸫 R0(LSB) 44 TA0 TA1 㸫 R1 45 TA2 㸫 R2 47 TA3 㸫 R3 48 TA4 㸫 R4 1 TA5 㸫 3 R5(MSB) TA6 㸫 G0(LSB) 4 㸫 G1 6 TB0 TB1 㸫 G2 7 TB2 㸫 G3 9 TB3 㸫 G4 10 TB4 㸫 12 G5(MSB) TB5 㸫 B0(LSB) 13 TB6 㸫 B1 15 㸫 B2 16 TC0 TC1 㸫 B3 18 TC2 㸫 B4 19 TC3 㸫 20 B5(MSB) TC4 㸫 (HS) 22 TC5 㸫 (VS) 23 TC6 㸫 DE 25 BITSEL=H(3.3V) SELLVDS=L(GND) or OPEN 1 CYCLE R1 R0 G0 R5 R4 R3 R2 R1 R0 G0 G2 G1 B1 B0 G5 G4 G3 G2 G1 B1 B3 B2 DE (VS) (HS) B5 B4 B3 B2 DE 㻾㻣 㻾㻢 㻺㻭 㻮㻣 㻮㻢 㻳㻣 㻳㻢 㻾㻣 㻾㻢 㻺㻭    DE㸸DATA ENABLE   HS㸸HSYNC   VS㸸VSYNC M407011                                Page 14 Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. TCG070WVLPEANN-AN50  2) Block Diagram BITSEL=H(3.3V) SELLVDS=L(GND) or OPEN   ͤSELLVDS signal line has 10㹩Ȑ pulldown resister. M407011                                Page 15 Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page 16 TCG070WVLPEANN-AN50 8. Input timing characteristics 8-1. Timing characteristics Item Clock (CK) Enable signal (DE) Refresh rate Frequency Symbol Min. Typ. Max. Unit 1/Tc 29.88 33.20 36.52 MHz 1024 1056 1088 Tc - 31.8 - ȣs Horizontal Period Th Horizontal display period Thd Vertical Period Tv Vertical display period Tvd fv 800 487 525 1) Tc 550 480 50 Note 60 Th Th 70 Hz 1) Please set a clock frequency, a vertical dormant period, and the horizontal dormant period so that the Horizontal Period should not reach less than Min. value. 2) If the refresh rate reach less than Min. value, the deterioration of the display quality, flicker etc., may occur.(fv=1/Tv) M407011                                2) Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 17 8-2. Input Data Signals and Display position on the screen   9. Backlight characteristics Item Forward current Forward voltage Operating life time 1) 2) 㻌㻌 3) 4) 1) 1) 2), 3) Symbol Min. Typ. Max. Unit Note IF - 60 - mA Ta=-20㹼70°C - 18.9 22.1 V IF=60mA, Ta=-20Υ - 18.0 21.2 V IF=60mA, Ta=25Υ - 17.4 20.7 V IF=60mA, Ta=70Υ - 100,000 - h IF=60mA, Ta=25Υ VF T For each “AN-CA” When brightness decrease 50% of minimum brightness. 㻌 The average life of a LED will decrease when the LCD is operating at higher temperatures. Life time is estimated data.(Condition : IF=60mA, Ta=25Υ in chamber). An input current below 15mA may reduce the brightness uniformity of the LED backlight. This is because the amount of light from each LED chip is different. Therefore, please evaluate carefully before finalizing the input current. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 18 10. Lot number identification  The lot number shall be indicated on the back of the backlight case of each LCD. TCG070WVLPEANN-AN50         - ŌŌ - ŌŌ - Ō ŅŅ 12           Ņ 3 MADE IN Ņ 4 ŌŌŌŌŌ Ņ 5 No1. - No5. above indicate 1. Year code 2. Month code 3. Date 4. Version Number 5. Country of origin (Japan or China)   Year 2013 2014 2015 2016 2017 2018 Code 3 4 5 6 7 8 Month Jan. Feb. Mar. Apr. May Jun. Code 1 2 3 4 5 6 Month Jul. Aug. Sep. Oct. Nov. Dec. Code 7 8 9 X Y Z 11. Warranty  11-1. Incoming inspection   Please inspect the LCD within one month after your receipt.   11-2. Production warranty   Kyocera warrants its LCD’s for a period of 12 months from the ship date. Kyocera shall, by mutual agreement, replace or re-work defective LCD’s that are shown to be Kyocera’s responsibility. M407011                                Spec No. TQ3C-8EAF0-E1YAA125-01 Part No. Page TCG070WVLPEANN-AN50 19 12. Precautions for use 12-1. Installation of the LCD 1) A transparent protection plate shall be added to protect the LCD and its polarizer. 2) The LCD shall be installed so that there is no pressure on the LSI chips. 3) The LCD shall be installed flat, without twisting or bending. 4) A transparent protection sheet is attached to the polarizer. Please remove the protection film slowly before use, paying attention to static electricity. 5) Please design the housing window so that its edges are between the active area and the effective㻌 area of the LCD screen. 12-2. Static electricity 1) Since CMOS ICs are mounted directly onto the LCD glass, protection from static electricity is required. 2) Workers should use body grounding. Operator should wear ground straps. 12-3. LCD operation 1) The LCD shall be operated within the limits specified. Operation at values outside of these limits may shorten life, and/or harm display images. 2) Please select the best display pattern based on your evaluation because flicker, lines or nonuniformity or unevenness can be visible depending on display patterns. 12-4. Storage 1) The LCD shall be stored within the temperature and humidity limits specified. Store in a dark area, and protect the LCD from direct sunlight or fluorescent light. 2) Always store the LCD so that it is free from external pressure onto it. 12-5. Usage 1) DO NOT store in a high humidity environment for extended periods. Polarizer degradation bubbles, and/or peeling off of the polarizer may result. 2) The front polarizer is easily scratched or damaged. Prevent touching it with any hard material, and from being pushed or rubbed. 3) The LCD screen may be cleaned by wiping the screen surface with a soft cloth or cotton pad using a little Ethanol. 4) Water may cause damage or discoloration of the polarizer. Clean condensation or moisture from any source immediately. 5) Always keep the LCD free from condensation during testing. Condensation may permanently spot or stain the polarizer. 6) Do not disassemble LCD because it will result in damage. 7) This Kyocera LCD has been specifically designed for use in general electronic devices, but not for use in a special environment such as usage in an active gas. Hence, when the LCD is supposed to be used in a special environment, evaluate the LCD thoroughly beforehand and do not expose the LCD to chemicals such as an active gas. 8) Please do not use solid-base image pattern for long hours because a temporary afterimage may appear. We recommend using screen saver etc. in cases where a solid-base image pattern must be used. 9) Liquid crystal may leak when the LCD is broken. Be careful not to let the fluid go into your eyes and mouth. In the case the fluid touches your body; rinse it off right away with water and soap. M407011                                Spec No. Part No. TQ3C-8EAF0-E1YAA125-01 Page TCG070WVLPEANN-AN50 13. Reliability test data   Test item Test condition Test time High temp. atmosphere 80°C 240h Low temp. atmosphere -30°C 240h High temp. humidity atmosphere 40°C 90% RH 240h Temp. cycle -30°C 0.5h R.T. 0.5h 80°C 0.5h 10cycles High temp. operation 70°C 500h 1) 2) 3) 4)   Judgement Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption Display function Display quality Current consumption : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect : No defect Each test item uses a test LCD only once. The tested LCD is not used in any other tests. The LCD is tested in circumstances in which there is no condensation. The reliability test is not an out-going inspection. The result of the reliability test is for your reference purpose only. The reliability test is conducted only to examine the LCD's capability. M407011                                20 Spec No. Date TQ3C-8EAF0-E2YAA125-01 September 24, 2014 KYOCERA INSPECTION STANDARD TYPE : TCG070WVLPEANN-AN50 KYOCERA DISPLAY CORPORATION Original Issue Date Designed by : Engineering dept. Prepared Checked Approved Confirmed by : QA dept. Checked Approved July 23, 2013                                         Spec No. Part No. TQ3C-8EAF0-E2YAA125-01 Date Revision record Designed by : Engineering dept. Prepared Checked Approved Page TCG070WVLPEANN-AN50 Confirmed by : QA dept. Checked Approved September 24, 2014 Rev.No. 01 Date Sep 24, 2014 Page Descriptions Change “Definition of inspection item”, Bright dot defect 1 - Spec No.   Part No. TQ3C-8EAF0-E2YAA125-01 Page TCG070WVLPEANN-AN50 1  Visuals specification 1) Note Note General 1. Customer identified anomalies not defined within this inspection standard shall be reviewed by Kyocera, and an additional standard shall be determined by mutual consent. 2. This inspection standard about the image quality shall be applied to any defect within the effective viewing area and shall not be applicable to outside of the area. 3. Definition of Inspection conditions Luminance : 500 Lux min. Inspection distance : 300 mm. Temperature : 25 s 5Υ Direction      : Directly above Dot defect Bright dot defect The dot is constantly “on” when power applied to the inspection LCD, even when all “Black” data sent to the screen. item Inspection tool: 5% Transparency neutral density filter. Count dot: If the dot is visible through the filter. Don’t count dot: If the dot is not visible through the filter. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 There is an electrode in the middle of the dot 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 and one dot is shown in the left drawing. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 㸺dot drawing㸼    Black dot defect The dot is constantly “off” when power applied to the LCD, even when all “White” data sent to the screen. Similar size compared to bright dot. White dot Pixel works electrically, however, circular/foreign (Circular/foreign particle makes dot appear to be “on” even when all particle) “Black” data is sent to the screen. Adjacent dot Adjacent dot defect is defined as two or more bright dot defects or black dot defects. 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 䠮 䠣 䠞 External inspection dot defect  Bubble, Scratch, Visible operating (all pixels “Black” or “White”) and non Foreign particle operating. (Polarizer, Cell, Backlight) Others Appearance inspection Does not satisfy the value at the spec. CFL wires Damaged to the CFL wires, connector, pin, functional failure or appearance failure. Definition Definition of circle size Definition of linear size of size 㹢㸻(㹟㸩㹠)/2   Spec No.   Part No. TQ3C-8EAF0-E2YAA125-01 Page TCG070WVLPEANN-AN50 2  2) Standard Classification Defect Dot (in LCD defect glass) Inspection item Bright dot defect Black dot defect :4 Bright dot spacing : 5 mm or more Acceptable number :5 : 5 mm or more Acceptable number :2 Acceptable number :3 3 or more dots join Acceptable number :0 Total dot defects Acceptable number : 5 Max Bright dot defect Black dot defect White dot, Dark dot (Circle) External inspection Acceptable number Black dot spacing 2 dot join Others Judgement standard Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Polarizer (Scratch) (Defect on Polarizer or Width (mm) 0.1 㸺 W ӌ 0.1 between Polarizer 0.1 㸺 W ӌ 0.3 and LCD glass) 0.3 㸺 W ӌ 0.3 Length (mm) 㸫 2.0 㸺 L ӌ 5.0 5.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 0 0 Polarizer (Bubble) Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.3 0.3 㸺 d ӌ 0.5 0.5 㸺 d ӌ 0.4 Acceptable number (Neglected) 5 3 0 Size (mm) 0.2 㸺 d ӌ 0.2 0.2 㸺 d ӌ 0.4 0.4 㸺 d ӌ 0.5 0.5 㸺 d ӌ0 .4 Acceptable number (Neglected) 5 3 0 Foreign particle 㸦Circular shape㸧 Foreign particle 㸦Linear shape㸧 Scratch Width (mm) 0.00 㸺 W ӌ 0.03 0.03 㸺 W ӌ 0.10 0.1 㸺 W ӌ0.3 Length (mm) 㸫 2.0 㸺 L ӌ 2.0 2.0 㸺 L ӌ 4.0 4.0 㸺 L ӌ 5.0 㸫 Acceptable number 1HJOHFWHG 1HJOHFWHG 3 0 (According to circular shape)