SFH4510_02

GaAs-IR-Lumineszenzdioden (950 nm) in SMR® Gehäuse GaAs Infrared Emitters (950 nm) in SMR® Package SFH 4510 SFH 4515 SFH 4510 SFH 4515 Wesentliche Merkmale GaAs-LED mit sehr hohem Wirkungsgrad SMR® (Surface Mount Radial) Gehäuse Für Oberflächenmontage geeignet Gegurtet lieferbar Gehäusegleich mit Fotodiode SFH 2500/ SFH 2505 • Hohe Zuverlässigkeit • Gute spektrale Anpassung an Si-Fotoempfänger • UL-Freigabe Anwendungen • IR-Fernsteuerung von Fernseh- und Rundfunkgeräten, Videorecordern, Lichtdimmern • Gerätefernsteuerungen für Gleich- und Wechsellichtbetrieb • Sensorik • Diskrete Lichtschranken • Diskrete Optokoppler Typ Type SFH 4510 SFH 4515 Bestellnummer Ordering Code Q62702-P1798 Q62702-P1821 Gehäuse Package • • • • • Features • • • • • Very highly efficient GaAs-LED SMR® (Surface Mount Radial) package Suitable for surface mounting (SMT) Available on tape and reel Same package as photodiode SFH 2500/ SFH 2505 • High reliability • Spectral match with silicon photodetectors • UL-approval Applications • IR remote control of hi-fi and TV-sets, video tape recorders, dimmers • Remote control for steady and varying intensity • Sensor technology • Discrete interrupters • Discrete optocouplers 5-mm-SMR®-Gehäuse (T 1 3/4), schwarzes EpoxyGießharz, Anschlüsse (SFH 4510 gebogen, SFH 4515 gerade) im 2.54-mm-Raster (1/10’’), Kathodenkennzeichnung: siehe Maßzeichnung. 5 mm SMR® package (T 1 3/4), black-colored epoxy resin, solder tabs (SFH 4510 bent, SFH 4515 straight) lead spacing 2.54 mm (1/10’’), cathode marking: see package outline. 1 2002-01-24 SFH 4510, SFH 4515 Grenzwerte (TA = 25 °C) Maximum Ratings Bezeichnung Parameter Betriebs- und Lagertemperatur Operating and storage temperature range Sperrspannung Reverse voltage Durchlaßstrom Forward current Stoßstrom, tp = 10 µs, D = 0 Surge current Verlustleistung Power dissipation Symbol Symbol Wert Value – 40 … + 100 5 100 3 150 300 Einheit Unit °C V mA A mW K/W Top; Tstg VR IF (DC) IFSM Ptot Wärmewiderstand Sperrschicht - Umgebung bei RthJA Montage auf FR4 Platine, Padgröße je 20 mm2 Thermal resistance junction - ambient mounted on PC-board (FR4), padsize 20 mm2 each Kennwerte (TA = 25 °C) Characteristics Bezeichnung Parameter Wellenlänge der Strahlung Wavelength at peak emission IF = 100 mA Spektrale Bandbreite bei 50% von Ιmax Spectral bandwidth at 50% of Ιmax IF = 100 mA Abstrahlwinkel Half angle Aktive Chipfläche Active chip area Abmessungen der aktiven Chipfläche Dimension of the active chip area Schaltzeiten, Ie von 10% auf 90% und von 90% auf 10%, bei IF = 100 mA, RL = 50 Ω Switching times, Ιe from 10% to 90% and from 90% to 10%, IF = 100 mA, RL = 50 Ω 2002-01-24 2 Symbol Symbol λpeak Wert Value 950 Einheit Unit nm ∆λ 55 nm ϕ ± 14 0.09 0.3 × 0.3 0.5 Grad deg. mm2 mm µs A L×B L×W tr, tf SFH 4510, SFH 4515 Kennwerte (TA = 25 °C) Characteristics (cont’d) Bezeichnung Parameter Kapazität Capacitance VR = 0 V, f = 1 MHz Durchlaßspannung Forward voltage IF = 100 mA, tp = 20 ms IF = 1 A, tp = 100 µs Sperrstrom, Reverse current VR = 5 V Gesamtstrahlungsfluß, Total radiant flux IF = 100 mA, tp = 20 ms Temperaturkoeffizient von Ie bzw. Φe, IF = 100 mA Temperature coefficient of Ie or Φe, IF = 100 mA Temperaturkoeffizient von VF, IF = 100 mA Temperature coefficient of VF, IF = 100 mA Temperaturkoeffizient von λ, IF = 100 mA Temperature coefficient of λ, IF = 100 mA Symbol Symbol Wert Value 25 Einheit Unit pF Co VF VF IR 1.30 (≤ 1.5) 2.30 (≤ 2.8) 0.01 (≤ 1) V V µA Φe 22 mW TCI TCV TCλ – 0.5 –2 0.3 %/K mV/K nm/K 2002-01-24 3 SFH 4510, SFH 4515 Strahlstärke Ie in Achsrichtung gemessen bei einem Raumwinkel Ω = 0.001 sr Radiant Intensity Ie in Axial Direction at a solid angle of Ω = 0.001 sr Bezeichnung Parameter Strahlstärke Radiant intensity IF = 100 mA, tp = 20 ms Strahlstärke Radiant intensity IF = 1 A, tp = 100 µs Symbol Ie typ Ie min Ie typ Werte Values 50 ≥ 25 450 Einheit Unit mW/sr mW/sr mW/sr 2002-01-24 4 SFH 4510, SFH 4515 Relative Spectral Emission Irel = f (λ) 100 % OHRD1938 Radiant Intensity Ιe = f (IF ) Ιe 100 mA OHR01551 Single pulse, tp = 20 µs Ιe Ι e 100 mA 10 2 A Max. Permissible Forward Current IF = f (T A ) 125 OHF01534 I F mA 100 Ι rel 80 10 1 60 75 10 0 40 50 10 -1 20 25 0 880 920 960 1000 λ nm 1060 10 -2 10 -3 10 -2 10 -1 10 0 A ΙF 10 1 0 0 10 20 30 40 50 60 70 80 ˚C 100 T IF = f (VF), single pulse, tp = 20 µs 10 1 OHR01554 Forward Current Permissible Pulse Handling Capability IF = f (τ), TA = 25 °C, duty cycle D = parameter 10 4 OHR00860 ΙF A Ι F mA 5 0 tp D= D = 0.005 0.01 0.02 0.05 tp T T ΙF 10 10 -1 10 3 0.1 0.2 5 10 -2 0.5 10 -3 0 1 2 3 4 5 6 V VF 8 DC 10 2 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 10 1 s 10 2 tp Radiation Characteristics Ιrel = f (ϕ) 40 30 20 10 0 1.0 50 0.8 60 OHF00265 0.6 70 0.4 80 90 0.2 0 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 2002-01-24 5 SFH 4510, SFH 4515 Maßzeichnung Package Outlines SFH 4510 7.5 (0.295) 5.5 (0.217) 2.8 (0.110) 2.4 (0.094) 3.7 (0.146) 3.3 (0.130) 2.7 (0.106) 2.4 (0.094) Chip position 4.5 (0.177) 3.9 (0.154) 2.05 (0.081) R 1.95 (0.077) ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 6.0 (0.236) 5.4 (0.213) 4.8 (0.189) 14.7 (0.579) 13.1 (0.516) 2.54 (0.100) spacing Cathode/ Collector 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) -0.1...0.2 (-0.004...0.008) 4.4 (0.173) GEOY6968 SFH 4515 8.0 (0.315) 7.4 (0.291) Chip position 4.5 (0.177) 3.9 (0.154) 2.05 (0.081) R 1.95 (0.077) 15.5 (0.610) 14.7 (0.579) 2.7 (0.106) 2.4 (0.094) -0.15...0.15 (-0.006...0.006) ((3.2) (0.126)) ((R2.8 (0.110)) ((3.2) (0.126)) 6.0 (0.236) 5.4 (0.213) 2.54 (0.100) spacing Cathode/ Collector 4.5 (0.177) 3.9 (0.154) 7.7 (0.303) 7.1 (0.280) 4.8 (0.189) 4.4 (0.173) GEOY6969 Maße werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-01-24 6 SFH 4510, SFH 4515 Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg © All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you – get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-01-24 7