ECWU1C394JC9

Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction I Features • Small in size • For reflow soldering • RoHS directive compliant I Recommended Applications • General purpose (Coupling, By-pass) I Explanation of Part Numbers 1 2 3 4 5 6 7 8 9 10 11 12 E C W U Rated voltage Nominal capacitance C Cap. Tol. Suffix J ±5 % K ±10 % Suffix Product code Dielectric & construction 1C 16 VDC 1H 50 VDC 1 100 VDC 2 250 VDC 9 V Tape width 12 mm 16 mm I Specifications Category temp.range (Including temperature-rise on unit surface) Rated voltage 16 VDC, 50 VDC : -55 ˚C to +105 ˚C 100 VDC, 250 VDC : -55 ˚C to +125 ˚C 16 VDC, 50 VDC, 100 VDC, 250 VDC (100 VDC, 250 VDC : Derating of rated voltage by 1.25 %/˚C more than 85 ˚C) 16 VDC Capacitance range 50 VDC 100 VDC 250 VDC Capacitance tolerance 16 VDC, 50 VDC 100 VDC 0.12 µF to 0.47 µF (E12) 0.056 µF to 0.22 µF (E12) 0.012 µF to 1.0 µF (E12) 0.0010 µF to 0.12 µF (E12) ±5 %(J) > ±5 %(J), ±10 %(K) (C=0.18 µF : ±10 %(K)only) Withstand voltage Dissipation factor (tan ) ±5 %(J), ±10 %(K) 250 VDC Between terminals: Rated volt. (VDC)✕150 % 60 s tan 50 VDC : IR=3000 MΩ · (20 ˚C,50 VDC, 60 s) > 100 VDC, 250 VDC : IR=3000 MΩ · (20 ˚C,100 VDC, 60 s) > 16 VDC : IR=1000 MΩ · µF (20 ˚C,10 VDC, 60 s) > 100 VDC : IR=1000 MΩ · µF (20 ˚C,100 VDC, 60 s) Insulation resistance (IR) C>0.33 µF Soldering conditions Reflow soldering : 240 ˚C max. and 60 s max. at more than 220 ˚C (Temp. at cap. surface) (Please consult us for Reflow 250 ˚C max. product.) ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ❈ Please consult us for capacitance range between 0.15 µF and 1.0 µF for 250 VDC type. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors I Construction I Dimensions in mm (not to scale) Size code E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X V L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.7 9.8 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.5 6.3 H 1.4 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 ❈ ❈ Refer to the column “Rating, Dimensions & Quantity”. I Taping Specification for Automatic Mounting Refer to the page of taping specifications. I Rating, Dimensions & Quantity/Reel G Capacitance tolerance : ±5 % (J) Cap. (µF) 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 Rated volt. 16 VDC Rated volt. 50 VDC Part No Dimensions (mm) L W H Size code Q'ty Part No ECWU1H563JC9 ECWU1H683JC9 ECWU1H823JC9 ECWU1H104JC9 ECWU1H124JC9 ECWU1H154JC9 ECWU1H184JC9 ECWU1H224JC9 Dimensions (mm) Please use 16 VDC rating of ECHU(X) ECWU1C124JC9 ECWU1C154JC9 ECWU1C184JC9 ECWU1C224JC9 ECWU1C274JC9 ECWU1C334JC9 ECWU1C394JC9 ECWU1C474JC9 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 1.4 2.0 2.0 2.4 1.8 2.0 2.4 2.8 E1 E2 E2 E3a D1 D2 D3 D4 3000 2000 3000 L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 Size code Q'ty E2 E2 E3a E3 D1 D2 D3 D4 3000 2000 3000 2000 Cap.