EPJ4030-S9

Gigabit Filter Port Jack ELECTRONICS INC. EPJ4030-S9 • Designed for Gigabit Ethernet and 10/100Base-TX Transceiver ICs • Complies with IEEE 802.3ab Standards and Gigabit Ethernet Specifications • Thermo Plastic PBT UL94V-0 Rated Connector Housing • Complete Bob Smith Termination Included • Metal Shield : Nickel Plated Copper Alloy • Operating Temperature : 0°C to +70°C • Space Saving RJ-45 Connector Electrical Parameters @ 25° C Turns Ratio Xmit/Rcv 1:1/1:1 OCL* (uH Min.) 100 KHz/0.1V 350 Insertion Loss (dB Max.) 1-100 MHz -1.0 Return Loss (dB Min.) 1-30 MHz 30-40 MHz 40-50 MHz 50-80 MHz -16 -13.5 -11.5 -10 CMRR (dB Min.) 1-100 MHz -30 1-30 MHz -40 Crosstalk (dB Min.) 30-60 MHz -38 60-100 MHz -33 • *OCL : @ 8 mA DC Bias • Isolation : 1500 Vrms • Schematic Package .630 Typ. (16.00) .060 (1.50) .846 (21.50) Marking : PCA EPJ4030-S9 D.C. P1 1CT:1CT (Xmit) J1 75 Ω P2 P3 1CT:1CT (Rcv) J2 J3 J1 Green LED .019 Typ. (.483) Yellow LED .535 (13.60) 75 Ω .429 (10.90) P4 .126 Typ. (3.20) Chip Side P5 P6 P7 J6 Cable Side J4 75 Ω P8 1CT:1CT (Rcv) P9 75 Ω P10 J8 Shield .350 (8.89) P11 .120 (3.05) Green LED P12 P13 Yellow LED P14 1000 pF 2000V J7 J5 1CT:1CT (Xmit) Recommended PCB Layout (Component Side) .067 (1.70) Ø (2 Plcs) .035 (.900) Ø (14 Plcs) .050 (1.27) .100 (2.54) .100 (2.54) P1 .126 (3.20) Ø (2 Plcs) .160 (4.06) .100 (2.54) .322 (8.18) .450 (11.43) .620 (15.75) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSJ4030-S9 Rev. 11/5/03 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com