P1935

Product Specification P1935 Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output FEATURES • • • • • 1.9 GHz Power Amplifier Module Typical 33.5 dBm output power Excellent adjacent leakage power Typical 35.7 dB power gain Low cost metal package P1935 APPLICATION • Final stage power amplifier of base station for PHS DESCRIPTION • The P1935 is a high performance 1.9 GHz band power amplifier offering excellent linearity. The device provides 33.5 dBm output power with a typical 35.7 dB gain at 1.9 GHz. It is housed in a cost effective metal package and operates from +10 V and –5 V power supplies. Power Amplifier 1880-1920 MHz 35 dB min. Gain @ 1900MHz LIMITING VALUES Notes: Operating the device above these parameters may cause permanent damage, Case Temperature Tc=25°C SYMBOL V1 V2 Pin Tstg Topt PARAMETER DC supply voltage Input Power Storage Temperature Operating Temperature MIN. - 40 - 20 MAX. 12 -7 10 + 95 + 80 UNIT V V dBm °C °C CHARACTERISTICS Table 1: Test condition 25°C SYMBOL f Id Ga 2f0 3f0 Padj1 Padj2 PARAMETER Frequency Supply Current Power Gain Input VSWR Harmonic Distortion Adjacent Channel Leakage Power1) CONDITIONS Pout=33.5 dBm V1= 10 V V2= -5 V ± 600 kHz ± 900 kHz MIN. 1880 35 - TYP. 1200 35.7 1.5 -55 -55 -64 -71 MAX. 1920 1270 2.5 -40 -36 -61 -69 UNIT MHz mA dB dBc dBc dBc dBc Notes:1) RF signal modulation is per PHS RCR-28 Page 1 of 5 September 2006 Document Revision Level B Product Specification P1935 Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output 40 f=1900MHz, V1=10V, V2= -5V Power Characteristics: P1935 35 Pout [dBm] 30 25 20 15 -20 -15 -10 -5 Pin [dBm] 0 5 10 Gain vs. Pout: P1935 40 f=1900MHz, V1=10V, V2= -5V 38 Gain [dB] 36 34 32 30 20 22 24 26 28 30 Pout [dBm] 32 34 36 38 Page 2 of 5 September 2006 Document Revision Level B Product Specification P1935 Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Harmonic Distortion: P1935 -30 -40 2fo 3fo 2fo , 3fo [dBc] -50 -60 -70 -80 -90 f=1900MHz, V1=10V, V2= -5V -100 20 22 24 26 28 30 32 34 36 38 Pout [dBm] ACPR: P1935 -40 -50 ACPR [dBc] -60 -70 -80 -90 20 22 24 26 28 30 32 34 36 38 Channel Pout [dBm] + 600 kHz - 600 kHz + 900 kHz - 900 kHz f=1900MHz, V1=10V, V2= -5V Page 3 of 5 September 2006 Document Revision Level B Product Specification P1935 Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output Notes: all dimensions in mm Pinning: 1 2 3 4 5 6 Case ±0.5 4.0 2.0 2.5 2.5 7.5 2.5 2.5 2.5 RFout V1 (10V) V2 (-5V) V1 (10V) V2 (-5V) RFin Ground 1.45 29.0 26.4 22.0 ±0.1 European Projection ±0.1 production datecode (year, week) acc. IEC62 YYWW 13.0 5.0 4x R1.2 9.0 P1935 Germany 2.4 2.0 1 2 3 4 5 6 0.3 YYWW P1935 Germany C2 C2 C2 C2 C1 C1 C1 V1 (10V) V1 (10V) V2 (-5V) C1 C2 1 μF 0.1 μF Page 4 of 5 September 2006 Document Revision Level B Product Specification P1935 Power Amplifier 1880-1920 MHz, 35 dB min. Gain @ 1900 Hz @ 33.5 dBm Output DEFINITIONS Data Sheet Status Objective Product Specification Preliminary Product Specification Product Specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. Premier Devices reserves the right to make changes without further notice to any products herein. Premier Devices makes no warranty representation or guarantee regarding the suitability of its products for any particular purpose, nor does Premier Devices assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Premier Devices datasheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer´s technical experts. Premier Devices does not convey any license under its patent rights nor the rights of others. Premier Devices products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Premier Devices product could create a situation where personal injury or death may occur. Should Buyer purchase or use Premier Devices products for any such unintended or unauthorized application, Buyer shall indemnify and hold Premier Devices and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, and claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Premier Devices was negligent regarding the design or manufacture of the part. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. © Premier Devices Germany GmbH 2006 How to contact us: Premier Devices Germany GmbH Loeffelholzstrasse 20, D-90441 Nuernberg, Germany Phone: +49 (0) 911 9411 233, FAX: +49 (0) 911 9411 198, Email: sales.germany@premierdevices.com, Internet: http://www.premierdevices.de/ Page 5 of 5 September 2006 Document Revision Level B