0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
EK42421-01

EK42421-01

  • 厂商:

    PEREGRINE(游隼半导体)

  • 封装:

    -

  • 描述:

    BOARD EVAL SPDT SW PE42421

  • 数据手册
  • 价格&库存
EK42421-01 数据手册
Product Specification PE42421 SPDT UltraCMOS® 10 MHz – 3.0 GHz RF Switch Product Description Features The PE42421 UltraCMOS® RF switch is designed to cover a broad range of applications from 10 MHz through 3000 MHz. This reflective switch integrates on-board CMOS control logic with a low voltage CMOS-compatible control interface, and can be controlled using either single-pin or complementary control inputs. Using a nominal +3-volt power supply voltage, a typical input 1 dB compression point of +33.5 dBm can be achieved.  Single-pin or complementary CMOS The PE42421 SPDT RF switch is manufactured on Peregrine’s UltraCMOS® process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. logic control inputs  Low insertion loss: 0.35 dB at 1000 MHz, 0.5 dB at 2000 MHz  Isolation of 30 dB at 1000 MHz, 20 dB at 2000 MHz  Typical input 1 dB compression point of +33.5 dBm  1.8V minimum power supply voltage  SC-70 package Figure 2. Package Figure 1. Functional Diagram 6-lead SC-70 ESD RFC RF1 RF2 ESD ESD CMOS Control Driver CTRL CTRL or VDD 71-0015-01 Document No. 70-0396-03 │ www.psemi.com ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Table 1. Electrical Specifications @ +25°C, VDD = 3V (ZS = ZL = 50Ω ) Parameter Operation Frequency Condition 1 Minimum Typical 10 MHz Unit 3000 MHz 0.45 0.60 dB dB Insertion Loss3 1000 MHz 2000 MHz Isolation 1000 MHz 2000 MHz 29 19 30 20 dB dB Return Loss3 1000 MHz 2000 MHz 21 24 22 27 dB dB ‘ON’ Switching Time 50% CTRL to 0.1 dB of final value, 1 GHz 1.50 us ‘OFF’ Switching Time 50% CTRL to 25 dB isolation, 1 GHz 1.50 us 15 mVpp 33.5 30.5 30.5 29 dBm 55 dBm Video Feedthrough 0.35 0.50 Maximum 2 Input 1 dB Compression 1000 MHz @ 2.3 - 3.3V 1000 MHz @ 1.8 - 2.3V 2500 MHz @ 2.3 - 3.3V 2500 MHz @ 1.8 - 2.3V Input IP3 1000 MHz, 20dBm input power 31.5 29.5 28.5 28 Notes: 1. Device linearity will begin to degrade below 10 MHz 2. The DC transient at the output of any port of the switch when the control voltage is switched from Low to High or High to Low in a 50Ω test set-up, measured with 1ns risetime pulses and 500 MHz bandwidth 3. A tuning capacitor must be added to the application board to optimize the insertion loss and return loss performance. See Figure 6 for details ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0396-03 │ UltraCMOS® RFIC Solutions Page 2 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Figure 3. Pin Configuration (Top View) Table 4. Absolute Maximum Ratings Symbol Max Unit -0.3 4.0 V Voltage on any DC input -0.3 VDD+ 0.3 V TST Storage temperature range -65 150 °C TOP Operating temperature range -40 85 °C PIN Input power (50 Ω) +345 dBm ESD Voltage (HBM, ML_STD 883 Method 3015.7) 2000 V ESD Voltage (MM, JEDEC, JESD22-A114-B) 100 V VDD VI Table 2. Pin Descriptions Pin No. Pin Name 4 Description RF Port1 1 RF1 2 GND Ground connection. Traces should be physically short and connected to ground plane for best performance. 3 RF24 RF Port2 4 CTRL Switch control input, CMOS logic level. 5 RFC4 RF Common 6 CTRL or VDD VESD Parameter/Condition Power supply voltage Min Notes: 5. To maintain optimum device performance, do not exceed Max PIN at desired operating frequency (see Figure 4) This pin supports two interface options: Single-pin control mode. A nominal 3-volt supply connection is required. Complementary-pin control mode. A complementary CMOS control signal to CTRL is supplied to this pin. Bypassing on this pin is not required in this mode. Exceeding absolute maximum ratings may cause permanent damage. Operation should be restricted to the limits in the Operating Ranges table. Operation between operating range maximum and absolute maximum for extended periods may reduce reliability. Figure 4. Maximum Input Power Note: 4. All RF pins must be DC blocked with an external series capacitor or held at 0 VDC Table 3. Operating Ranges Parameter Min Typ Max Unit VDD Power Supply Voltage 1.8 3.0 3.3 V 9 20 µA IDD Power Supply Current (VDD = 3V, VCNTL = 3V) Control Voltage High 0.7x VDD Control Voltage Low V 0.3x VDD V Moisture Sensitivity Level The Moisture Sensitivity Level rating for the PE42421 in the SC70 package is MSL1. Switching Frequency Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOS® devices are immune to latch-up. The PE42421 has a maximum 25 kHz switching rate. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOS® device, observe the same precautions that you would use with other ESDsensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the specified rating. Document No. 70-0396-03 │ www.psemi.com ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Table 5. Single-pin Control Logic Truth Table Control Voltages Signal Path Pin 6 (VDD) = VDD Pin 4 (CTRL) = High RFC to RF2 Pin 6 (VDD) = VDD Pin 4 (CTRL) = Low RFC to RF1 Table 6. Complementary-pin Control Logic Truth Table Control Voltages Pin 6 (CTRL or VDD) = Low Pin 4 (CTRL) = High Pin 6 (CTRL or VDD) = High Pin 4 (CTRL) = Low Signal Path RFC to RF2 Control Logic Input The PE42421 is a versatile RF CMOS switch that supports two operating control modes; single-pin control mode and complementary-pin control mode. Single-pin control mode enables the switch to operate with a single control pin (pin 4) supporting a +3-volt CMOS logic input, and requires a dedicated +3-volt power supply connection on pin 6 (VDD). This mode of operation reduces the number of control lines required and simplifies the switch control interface typically derived from a CMOS Processor I/O port. RFC to RF1 ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Complementary-pin control mode allows the switch to operate using complementary control pins CTRL and CTRL (pins 4 & 6), that can be directly driven by +3-volt CMOS logic or a suitable Processor I/O port. This enables the PE42421 to be used as a potential alternate source for SPDT RF switch products used in positive control voltage mode and operating within the PE42421 operating limits. Document No. 70-0396-03 │ UltraCMOS® RFIC Solutions Page 4 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Figure 5. Evaluation Board Layouts Evaluation Kit Peregrine Specification 101-0162-02 The SPDT switch EK Board was designed to ease customer evaluation of Peregrine’s PE42421. The RF common port is connected through a 50Ω transmission line via the top SMA connector, J1. RF1 and RF2 are connected through 50Ω transmission lines via SMA connectors J2 and J3, respectively. A through 50Ω transmission is available via SMA connectors J4 and J5. This transmission line can be used to estimate the loss of the PCB over the environmental conditions being evaluated. The board is constructed of a two metal layer FR4 material with a total thickness of 0.031”. The bottom layer provides ground for the RF transmission lines. The transmission lines were designed using a coplanar waveguide with ground plane model using a trace width of 0.0476”, trace gaps of 0.030”, dielectric thickness of 0.028”, metal thickness of 0.0021” and εr of 4.4. J6 and J7 provide a means for controlling DC and digital inputs to the device. J6-1 is connected to the device VDD or CTRL input. J7-1 is connected to the device CTRL input. Figure 6. Evaluation Board Schematic Peregrine Specification 102-0756-01 J4 N/A 1 1 T-line Description -Model = CPWG H = 28 mils T = 2.1 mils W = 47 mils G = 30 mils Er = 4.4 General Comments J7 CNTL 1 2 Transmission lines connected to J1, J2, and J3 should have exactly the same electrical length The path from J2 to J3 including the distance through the part should have the same length as J4 and J5 and be in parallel to J4 to J5 R2 1 K Ohm U1 PE42421/SC70-6 1 J3 RF2 1 J2 RF1 4 CTRL RF_2 3 5 RFC GND 2 6 VDD RF_1 1 1 C1 0.5pF SEEASSYNOTE 2 R1 1 K Ohm C2 0.5pF SEEASSYNOTE 2 1 2 2 1 2 1 J1 RFC J5 N/A Notes: Add two 0.5 pF caps in series to be shunted on the J1 SMA input Solder C1 side 1 to the RF trace close to the J1 pin Solder C1 side 2 to C2 side 1 Solder C2 side 2 to ground J6 CNTLX/VDD Document No. 70-0396-03 │ www.psemi.com ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Typical Performance Data @ -40°C to 85°C (Unless Otherwise Noted) Figure 7. Insertion Loss Figure 8. Isolation – Input to Output Figure 9. Isolation – Output to Output Figure 10. Return Loss (Input) ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0396-03 │ UltraCMOS® RFIC Solutions Page 6 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Typical Performance Data @ VDD = 2.3V, T = 25°C Figure 11. Insertion Loss Figure 12. Isolation – Input to Output Figure 13. Isolation – Output to Output Figure 14. Return Loss (Input & Output) Document No. 70-0396-03 │ www.psemi.com ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Figure 15. Package Drawing 6-lead SC-70 0.10 C (2X) 2.10±0.05 A 0.65 1.30 B 6 0.50 MIN 4 0.10 C 1.25±0.10 2.10±0.10 0.90±0.10 1.90 0.05 C 0.10 C (2X) Pin #1 Corner 1 3 0.65 SEATING PLANE 0.05±0.05 C 0.225±0.075 0.40 MIN 1.30 Side View Top View Recommended Land Pattern 181-0013 0.10 0.165±0.085 A B ALL FEATURES 0.36±0.10 End View Figure 16. Top Marking Specification  PPP YWW = Pin 1 Indicator PPP = Part Number YWW = Date Code 17-0021 ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Document No. 70-0396-03 │ UltraCMOS® RFIC Solutions Page 8 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com PE42421 Product Specification Figure 17. Tape and Reel Specifications Pin 1 4 5 Top of 4 5 6 6 Tape Feed Direction 3 2 1 3 2 1 Device Pin 1 Device Orientation in Tape Table 7. Ordering Information Order Code Part Marking Description Package Shipping Method EK42421-01 PE42421-EK PE42421 Evaluation Kit Evaluation Kit 1 / Box PE42421SCAA-Z 421 PE42421 SPDT RF Switch Green 6-lead SC-70 3000 units / T&R Sales Contact and Information For sales and contact information please visit www.psemi.com. Advance Information: The product is in a formative or design stage. The datasheet contains design target specifications for product development. Specifications and features may change in any manner without notice. Preliminary Specification: The datasheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product. Product Specification: The datasheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a CNF (Customer Notification Form). The information in this datasheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user’s own risk. Document No. 70-0396-03 │ www.psemi.com No patent rights or licenses to any circuits described in this datasheet are implied or granted to any third party. Peregrine’s products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, UltraCMOS and UTSi are registered trademarks and HaRP, MultiSwitch and DuNE are trademarks of Peregrine Semiconductor Corp. ©2010-2013 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9 Logo updated under non-rev change. Peregrine products are protected under one or more of the following U.S. Patents: http://patents.psemi.com
EK42421-01 价格&库存

很抱歉,暂时无法提供与“EK42421-01”相匹配的价格&库存,您可以联系我们找货

免费人工找货