1405217

https://www.phoenixcontact.com/us/products/1405217 Protective covers - EV-T2SC - 1405217 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Self-closing hinged cover for Infrastructure Socket Outlet, Type 2, IEC 62196-2, Thread: M5 Product Description Self-closing hinged cover for Infrastructure Socket Outlet Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 120.0 g Custom tariff number 85389099 Country of origin Germany Technical data Product definition Product type Self-closing hinged cover for Infrastructure Socket Outlet Standards/regulations IEC 62196-2 Charging standard Type 2 Charging mode Mode 3 Type of charging current AC Dimensions Height 93.7 mm Width 85 mm Depth 32.5 mm Bore dimensions 60 mm x 60 mm Ambient conditions 08/01/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1405217 Protective covers - EV-T2SC - 1405217 Technical data Ambient conditions Ambient temperature (operation) -30 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 80 °C IP54 Mechanical properties Cover mechanism Self-closing Mounting Possible mounting positions Front mounting, screwed on the back Required mounting screws M5 Design Design line Standard Housing color black Customer variations On request Material Material Plastic Drawings Dimensional drawing Dimensional drawing 85 Ø68 Hole image 60 93,7 125 60 Ø7 60 32,5 60 M5 Dimensional drawing 08/01/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1405217 Protective covers - EV-T2SC - 1405217 Schematic diagram Schematic diagram Rear mounting with rear hinged cover screw connection Front mounting with rear hinged cover screw connection The screw connection for a hinged cover from the accessories range (EV- Front mounting is only possible when the locking actuator is removed. We T2SC) only supports rear mounting. The panel thickness must not exceed 5 recommend using an Infrastructure Socket Outlet without pre-assembled mm. The sealing frame that is slid on from the rear must contact the housing locking actuator (EV-T2M3SE-…E0..., e.g., 1621729). wall flush with the flat side and must completely surround the Infrastructure The screw connection for a hinged cover from the accessories range (EVSocket Outlet. T2SC) only supports rear mounting. The panel thickness must not exceed 10 mm. The sealing frame that is slid on from the front must contact the housing wall flush with the flat side and must completely surround the Infrastructure Socket Outlet. Classifications eCl@ss eCl@ss 4.0 27141210 eCl@ss 4.1 27141210 eCl@ss 5.0 27149110 eCl@ss 5.1 27149110 eCl@ss 6.0 27261210 eCl@ss 7.0 27440208 eCl@ss 8.0 27440208 eCl@ss 9.0 27144792 ETIM ETIM 2.0 EC000241 ETIM 3.0 EC002040 ETIM 4.0 EC002314 ETIM 5.0 EC002314 UNSPSC UNSPSC 6.01 30212113 UNSPSC 7.0901 39121712 UNSPSC 11 39121712 UNSPSC 12.01 39121712 08/01/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1405217 Protective covers - EV-T2SC - 1405217 Classifications UNSPSC UNSPSC 13.2 39121712 Accessories Accessories Infrastructure socket outlet Socket Outlet - EV-T2M3SE12-3AC32A-0,7M6,0E10 - 1405214 Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), 12 V Locking actuator, Single wires, Length: 0.7 m, Thread: M5, Screw connection of a hinged cover: Only rear mounting possible     Socket Outlet - EV-T2M3SE24-3AC32A-0,7M6,0E10 - 1405216 Infrastructure Socket Outlet for charging electric vehicles with alternating current (AC), compatible with Infrastructure Plugs, Type 2, IEC 62196-2, 32 A / 480 V (AC), 24 V Locking actuator, Single wires, Length: 0.7 m, Thread: M5, Screw connection of a hinged cover: Only rear mounting possible     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/01/2016   Page 4 / 4