70IMX7-24-24-9

IMX 7 Series 7 Watt DC-DC Converters Wide input voltage ranges up to 150 V DC 1 or 2 outputs up to 48 V DC 1500...2500 V DC I/O electric strength test LGA • Magnetic feedback for single output models • Short circuit protection • Industry standard 2" x 1" case with 10.5 mm profile Selection chart Output 1 Output 2 Input voltage Type Options1, 2 Uo nom Io nom Uo nom Io nom Ui -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M -8 -8 -8 -8 -8 -8 -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M -8, M, C, L, Z -8, M, C, L, Z -8, M -8, M [V DC] [A] [V DC] [mA] [V DC] 3.3 1.5 8.4...36 20 IMX 7-03-9 3.3 1.5 16.8...75 40 IMX 7-03-9 3 3.3 1.5 40...121 70 IMX 7-03-9 3.3 1.5 60...150 110 IMX 7-03-9 5.1 1.2 8.4...36 20 IMX 7-05-9 5.1 1.2 16.8...75 40 IMX 7-05-9 3 5.1 1.2 40...121 70 IMX 7-05-9 5.1 1.2 60...150 110 IMX 7-05-9 12 0.5 8.4…36 20 IMX 7-12-9C 12 0.6 16.8…75 40 IMX 7-12-9C 3 15 0.4 8.4…36 20 IMX 7-15-9C 15 0.48 16.8…75 40 IMX 7-15-9C 3 24 0.26 8.4…36 20 IMX 7-24-9C 24 0.3 16.8…75 40 IMX 7-24-9C 3 5 0.7 5 0.7 8.4...36 20 IMX 7-05-05-9 5 0.7 5 0.7 16.8...75 40 IMX 7-05-05-9 3 5 0.7 5 0.7 40...121 70 IMX 7-05-05-9 5 0.7 5 0.7 60...150 110 IMX 7-05-05-9 12 0.3 12 0.3 8.4...36 20 IMX 7-12-12-9 12 0.3 12 0.3 16.8...75 40 IMX 7-12-12-9 3 12 0.3 12 0.3 40...121 70 IMX 7-12-12-9 12 0.3 12 0.3 60...150 110 IMX 7-12-12-9 15 0.24 15 0.24 8.4...36 20 IMX 7-15-15-9 15 0.24 15 0.24 16.8...75 40 IMX 7-15-15-9 3 15 0.24 15 0.24 40...121 70 IMX 7-15-15-9 15 0.24 15 0.24 60...150 110 IMX 7-15-15-9 24 0.15 24 0.15 8.4...36 20 IMX 7-24-24-9 24 0.15 24 0.15 16.8...75 40 IMX 7-24-24-9 3 24 0.15 24 0.15 40...121 70 IMX 7-24-24-9 24 0.15 24 0.15 60...150 110 IMX 7-24-24-9 1 For minimum order quantity and lead time contact Power-One. 2 Option M, C, L and Z exclude each other. 3 Operation at lower input voltage possible: P approx. 80% of P o o nom at Ui min = 14.4 V www.power-one.com Edition 4/04.2001 1 Board Mountable Input Input voltage range 20 IMX 7 40 IMX 7 70 IMX 7 110 IMX 7 IMX 7 Series 8.4...36 V DC 16.8...75 V DC 40...121 V DC 60...150 V DC Output Output voltage setting accuracy Ui nom, 50% lo nom , single output models ±0.5% Uo nom Ui nom, 50% lo nom, double outp., main/aux. outp. ±1% /±1.2% Uo nom Minimum load recommended for double output models 10% lo nom Line/load regulation Ui min...Ui max, 50% lo nom, single output models ±1% Uo nom Line regulation Ui nom , 50% lo nom, double output models ±1% Uo nom Load regulation Ui nom, 10...100% lo nom, double outp. models, main outp. ± 3% Uo nom tracking output ± 3% Uo nom Output voltage switching noise Ui nom , 0...100% lo nom, peak-peak, total max. 1.5% Uo nom Efficiency Ui nom , lo nom up to 84% Control and protection Input protection Overload protection No-load protection Remote shut down Trim input for Uo suppressor diode Ui min...Ui max, fully protected, hiccup mode TTL-compatible inhibit input disabled with ≥ 2.4 V Safety and EMC Electric strength test voltage Electromagnetic interference I/O (20/40/70/110 IMX7) with external filter 1500/1500/2000/2500 V DC class B Environmental Operating ambient temperature Storage temperature Relative humidity MTBF Ui nom , lo nom non operational non condensing GB 40 °C, MIL-HDBK-217F, N2 –40...85 °C, ambient, operating with pins with adapter PCB –25...71 °C –40...100 °C 93% 1'650'000 h Options Extended temperature range SMD version SMD version Open frame without case C-pinout -8 M L Z C Accessories DIN and chassis mounting bracket www.power-one.com Edition 4/04.2001 2 IMX 7 Series Mechanical data Tolerances ±0.3 mm (0.012") unless otherwise indicated. 7 Watt DC-DC Converters European Projection IMX 7 50.8 (2") 3.4 (0.13") 3 x 5.08 (0.2") 3.81(0.15") S09030 3.81(0.15") 1 20.3 (0.8") 0.8 × 1.2 (0.03 x 0.05") Pins ∅ 1.6 (0.06) PCB holes 5 x 3.81 (0.15") S90002 09032 4 3.81(0.15") 10 4.6 (0.18") Measuring point of case temperature TC 45.7 (1.8") PT 2.2 self tapping screws 0.8 (0.3") 1.27 (0.05") IMX 7 (option Z) 48 (1.9") 1 0.8 × 1.2 (0.03 x 0.05") Pins ∅ 1.6 (0.06) PCB holes 3 x 5.08 (0.2") 4 3.5 (0.14") 43.2 (1.7") 10 0.8 (0.3") IMX 7 (option C) 50.8 (2") 35.5 (1.4") 0.5(0.02") 15.2 (0.6") ∅ 1 (0.04") Pins ∅ 1.2 (0.05") PCB holes ∅ 1(0.04") 1 2 4 5 20.3 (0.8") 25.4 (1") 5.8 (0.2") 3 8.25 (0.32") 12.5 (0.49") 3.4 (0.13") Measuring point of case temperature TC 23 (0.9") 5 x 3.81 (0.15") 14 25.4 (1") 14 www.power-one.com Edition 4/04.2001 3 Board Mountable IMX 7 SMD version (option M) 3 x 5.08 (0.2") 50.8 (2") 14 IMX 7 Series 0.8 × 1.2 (0.03 x 0.05") Pins 3.81(0.15") 1.2 (0.45") 4 42.4 (1.67") 10 Measuring point of case temperature TC S09031 4.2 (0.17") IMX 7 SMD version (option L) 50.8 (2") Proposed solder lands 2.8 (0.11") 24 (0.94") 18 25.4 (1") 3.6 (1.4") Foot print 8 x 5 (1.9") 1 25.4 (1") 1 Pin allocation IMX 7, option M and Z Pin 1 2 3 4 10 11 12 13 14 Single output Vi+ Vi– i n.c. Vo– Vo+ Vo– R n.c. Dual output Vi+ Vi– i R (Trim) Vo1– Vo1+ Vo2– Vo2+ n.c. SMD version (option L) Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Single output Vo Go n.c. n.c. n.c. n.c. n.c. n.c. n.c. n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ Dual output Vo1 Go Vo2 n.c. n.c. n.c. n.c. n.c. Trim n.c. i no pin no pin n.c. n.c. n.c. Vi– Vi+ C pinout (option C) Pin 1 2 3 4 5 Single output Vi+ Vi– Vo+ no pin Vo– Dual output Vi+ Vi– Vo+ Go Vo– 10.5 (0.41") Measuring point of case temperature TC 90001 5 x 3.81 (0.15") www.power-one.com Edition 4/04.2001 4