EM02-100_11

05267 Only One Name Means ProTek’Tion™ EM02-100 TVS/EMI FIlTER ARRAy DEScRIPTIon The EM02-100 is a SOT-563, 2 line low pass filter array with integrated TVS diodes. The EM02-100 is designed to suppress unwanted EMI/RFI signals and provide ESD protection for high-speed data interfaces such as LCD displays, SMART phones and other portable electronics With a desired cutoff frequency of 110MHz, the EM02-100 provides good EMI/RFI attenuation better than 25dB in the 800MHz - 3GHz bandwidth. This blocks RF noises from GSM, DCS or Bluetooth which can affect the baseband chipset and other blocks. Coupled with the integrated TVS diodes, this device is able to meet IEC 61000-4-2 (ESD) and 610004-4 (EFT) immunity requirements. SoT-563 PAckAgE FEATuRES • • • • • • • • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns ESD Protection > 25 kilovolts EMI Filtering/TVS Low Pass Filters > 25dB Attenuation from 800MHz to 3GHz Protects up 2 data lines RoHS Compliant REACH Compliant APPlIcATIonS • • • • SMART Phones LCD Display Panel Portable Electronics SMART Cards MEchAnIcAl chARAcTERISTIcS • • • • Molded JEDEC SOT-563 Package Approximate Weight: 3 milligrams Lead-Free Pure-Tin Plating (Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C • Flammability Rating UL 94V-0 • 8mm Tape and Reel per EIA Standard 481 cIRcuIT DIAgRAM 100 Ohm Pin 1 15pF 15pF Pin 3 15pF Pin 6 Pin 2, 5 15pF Pin 4 100 Ohm 05267.R3 3/11 Page 1 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 TyPIcAl DEVIcE chARAcTERISTIcS MAXIMuM RATIngS @ 25°c unless otherwise Specified PARAMETER Operating Temperature Storage Temperature DC Power per Resistor Typical Resistance for 10 seconds Soldering Temperature for 10 seconds SyMBol TA TSTG P R TL VAluE -40 to 85 -55 to 150 400 100 265 unITS °C °C mW OHMs °C ElEcTRIcAl chARAcTERISTIcS PER lInE @ 25°c unless otherwise Specified PART nuMBER DEVIcE MARkIng RATED STAnD-oFF VolTAgE MInIMuM BREAkDoWn VolTAgE @ 1mA V(BR) VolTS 6.0 MAXIMuM REVERSE lEAkAgE cuRREnT @ 3V ID µA 0.1 TyPIcAl FoRWARD VolTAgE @ 10mA VF VolTS 0.8 MInIMuM cuT-oFF TyPIcAl ATTEnuATIon FREquEncy cAPAcITAncE (50 ohMS I/o) (note 1) zERo BIAS @ 800-3000 Mhz dB 25 VWM VolTS EM02-100 noTES M02 5.0 fc Mhz 110 @2.5V, 1Mhz c pF 30 1. 50pF @ 0V, 1MHz, ± 20% tolerance. 05267.R3 3/11 Page 2 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 TyPIcAl DEVIcE chARAcTERISTIcS FIguRE 1 TyPIcAl FIlTER PERFoRMAncE (TA = 25°c, Dc Bias = 0V, 50 ohm Environment) 0 -10 Insertion loss - dB -20 -30 -40 1 10 100 Frequency - Mhz 1000 10000 1.10 normalized Resistance FIguRE 2 RESISTAncE VS TEMPERATuRE (normalized to Resistance at 25°c) 1.06 1.02 0.98 0.94 0.90 -40 -20 0 20 40 Temperature - °c 60 80 100 05267.R3 3/11 Page 3 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 TyPIcAl DEVIcE chARAcTERISTIcS FIguRE 3 cAPAcITAncE VS REVERSE VolTAgE (normalized to capacitance at 2.5V Dc @ 25°c) 1.6 cj - capactiance(normalized) - pF 1.2 0.8 0.4 0 0 2 4 VR - Reverse Voltage - Volts 6 FIguRE 4 oVERShooT & clAMPIng VolTAgE (Through the Filter) 35 5 Volts per Division 25 15 5 -5 ESD Test Pulse - 15 kilovolt, 1/30ns (Waveshape) 05267.R3 3/11 Page 4 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 SoT-563 PAckAgE InFoRMATIon ouTlInE DIMEnSIonS DIM A B C D G J K S noTES 0.08 0.10 1.50 A MAX 0.067 0.051 0.024 0.011 C K MIllIMETERS MIn 1.50 1.10 0.50 0.17 0.50 BSC 0.18 0.30 1.70 InchES MIn 0.059 0.043 0.020 0.007 MAX 1.70 1.30 0.60 0.27 B 1 D J S 0.020 BSC 0.003 0.004 0.059 0.007 0.012 0.067 G 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. PAD lAyouT DIMEnSIonS DIM A B C D E noTES C E MIllIMETERS noMInAl 1.40 1.02 0.30 0.51 0.51 InchES noMInAl 0.055 0.040 0.012 0.020 0.020 A D B 1. Controlling dimension: inches. 05267.R3 3/11 Page 5 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 TAPE AnD REEl P0 t D P2 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Top Cover Tape A0 K0 Pin 1 F W B0 P User Direction of Feed SPEcIFIcATIonS REEl DIA. 178mm (7”) 1. 2. 3. 4. TAPE WIDTh 8mm A0 B0 k0 D E F W P0 P2 P tmax 0.25 1.78 ± 0.05 1.78 ± 0.05 0.69 ± 0.05 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 noTES Dimensions are in millimeters. Surface mount product is taped and reeled in accordance with EIA-481. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06051.R3 3/11. oRDERIng InFoRMATIon BASE PART nuMBER EM02-100 lEADFREE SuFFIX -LF TAPE SuFFIX -T7 qTy/REEl 3,000 REEl SIzE 7” TuBE qTy n/a 05267.R3 3/11 Page 6 www.protekdevices.com 05267 Only One Name Means ProTek’Tion™ EM02-100 coMPAny InFoRMATIon coMPAny PRoFIlE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. conTAcT uS corporate headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05267.R3 3/11 Page 7 www.protekdevices.com