J1026F21CNL

PulseJack™ 1x1 Tab-UP RJ45 Description: 100 Base-TX (Fast Ethernet) RJ45 1x1 Tab-UP with LEDs 8-pin (J1 series) and 6-pin (JP series) integrated magnetics connector, designed to support applications, such as ADSL modems, LAN-on-Motherboard, and Hub and Switches. Features and Benefits: RoHS peak wave solder temperature rating 260°C Suitable for CAT 5 & 6 UTP cable or better Meets IEEE 802.3 specification 350µH minimum OCL with 8mA bias current High performance for maximum EMI suppression Electrical Specifications @ 25°C - Operating Temperature 0°C to +70°C RoHS Compliant Part Number (Number of Ports) Turns Ratios EMI Fingers LEDs L/R Return Loss (dB TYP) 100Ω (±15Ω) Insertion Loss (dB TYP) Crosstalk (dB TYP) Common Mode Rejection (dB TYP) Hipot (Vrms) 1-65 MHz 1-10 MHz 10-30 MHz 30-60 MHz 60-80 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-50 MHz 50-150 MHz @60Hz 1 MIN G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 YES NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 1CT:1 No G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 1CT:1 1CT:1 YES G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1012F01CNL 1CT:1 1CT:1 No Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1012F21CNL 1CT:1 1CT:1 YES Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1012F21KNL 1CT:1 1CT:1 YES G/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1012F21RNL 1CT:1 1CT:1 YES RG/RY -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1026F01NL 1CT:1 1CT:1 No NONE -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1026F01PNL 1CT:1 1CT:1 No G/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 J1026F21CNL 1CT:1 1CT:1 YES Y/G -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JP006821UNL 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JP011821UNL 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 JP026821UNL 1CT:1 1CT:1 YES G_O/Y -1.0 -20 -16 -12 -10 -40 -35 -30 -30 -20 1500 TX RX J1006F01PNL 1CT:1 1CT:1 No J1006F21NL 1CT:1 1CT:1 J1011F01PNL 1CT:1 J1011F21PNL Notes: 1. LEDs Left/Right: G = green, Y = yellow, G_O = green/orange bi-color LED, R = LEDs with resistors. 1 Networking.PulseElectronics.com J402.G (03/19) PulseJack™ 1x1 Tab-UP RJ45 RJ45 Durability Test Rating Mating Force (MAX) Unmating Force (MAX) Durability Part Number Plug to Jack Retention (MIN) JP/J1 Series 5 Ibs./2.268 kgs. 5 Ibs./2.268 kgs. 750 Insertions 20 Ibs./9.072 kgs. RJ45 Material Specification Shield Housing Contact Part Number Material Finish Material Plating Area Solder Area Material Phosphor Bronze Nickel underplating and selective gold plating 15µ inches Thermoplastic Brass 10-20µ inches thick nickel over 10-20µ inches Brass Tin matte finish JP/J1 Series MSL2 Specification Rating UL 94 V-0 1 Notes: 1. Connector dimensions comply with FCC dimension requirements. 2. MSL = Moisture Sensitivity Level rating from 1 to 5 (highest rating = 1, lowest rating = 5 J1 Series Mechanicals .640 16,26 LEFT LED EMI Fingers RIGHT LED Patent Pending .550 MAX 13,97 MAX PulseJack J10XXXXXX TM Date Code Country of Origin .150 3,81 EMI Fingers SHIELD PIN BACK VIEW FRONT VIEW SIDE VIEW .390 9,91 .290 7,37 .060 1,52 .040 1,02 .290 7,37 .000 0,00 .130 3,30 2X .064 1,63 .670 17,02 10 9 7 5 3 8 6 4 .560 14,22 PIN #1 8X .035 0,89 .003 0,08 .010 (TOP OF PCB 0,25 TO BOTTOM OF OPENING) 2 .250 6,35 .003 0,08 4X R .010 MAX 0,25 RECOMMENDED PANEL CUTOUT BACK 12 11 .100 2,54 4X .040 .003 1,02 0,08 FACE VIEW .050 1,27 2X .125 3,18 .129 3,28 .135 3,43 .675 17,15 FRONT .000 0,00 .050 1,27 .100 2,54 .150 3,81 .200 5,08 .250 6,35 .300 7,62 .350 8,89 .400 10,16 .485 12,32 2 SUGGESTED PCB LAYOUT (Component Side) Dimensions: Inches mm Networking.PulseElectronics.com Unless otherwise specified, all tolerances are ± .010 0,25 J402.G (03/19) PulseJack™ 1x1 Tab-UP RJ45 J1 Series Electrical Schematics J1006 3 TD- 2 1CT:1 TRANSMIT RD+ 7 TX+ 2 TX- 3 RX+ 6 CT RD- 8 6 1CT:1 TRANSMIT TD+ 1 PCB SIDE TO PHY CT 1 CABLE SIDE RX- CT 3 TD- 2 1CT:1 TRANSMIT RD+ 7 CT RD- 8 1CT:1 TRANSMIT 6 RX- 8 75 J1026 2 TD- 3 RD+ 4 CT 1CT:1 TRANSMIT TX+ 2 TX- 3 RX+ 5 RD- 6 75 CHS Ground 8 6 1CT:1 RECEIVE TD+ 1 RX- PCB SIDE TO PHY CT 1 CABLE SIDE TD+ 1 PCB SIDE TO PHY RX+ Note: Connect CHS GND to PCB ground. J1012 CT 3 TD- 2 LED = P CT RD- 8 7 C1 CHS Ground 5 8 75 Left LED 3 10 9 12 11 Right LED Left LED 1CT:1 RECEIVE 4 5 75 1 TX+ 2 TX- 3 RX+ 6 RX- 6 4 75 LED = L or R Right LED 1CT:1 TRANSMIT RD+ 7 75 4 75 5 75 7 0.001 µF 8 75 C1 Note: Connect CHS GND to PCB ground. Note: Connect CHS GND to PCB ground. 12 11 3 7 C1 Note: Connect CHS GND to PCB ground. 9 10 TX- 5 75 CHS Ground 5 8 2 4 75 0.001 µF 7 N/C 5 75 4 5 TX+ 6 4 N/C 4 1 CABLE SIDE PCB SIDE TO PHY TD+ 1 CABLE SIDE J1011 LED = C or K 10 9 12 11 Right LED Left LED Networking.PulseElectronics.com Standard LED Wavelength Forward* V(MAX) (TYP) Yellow Green 585 nm 565 nm 2.5 V 2.5 V 2.1 V 2.2 V * With a forward current of 20 mA J402.G (03/19) PulseJack™ 1x1 Tab-UP RJ45 JP Series Mechanicals .656 [16.66] .999 [25.37] .394 [10.00] .550 MAX. [13.97 MAX.] .125 ±.020 [3.18 ±.0.51] EMI Fingers 5X .080 [2.03] .130 [3.30] .305 [7.75] 2X .068 [1.71] .125 [3.17] .500 [12.70] .565 [14.35] .661 [16.79] Dimensions: Inches mm 4 Networking.PulseElectronics.com Unless otherwise specified, all tolerances are ± .010 0,25 J402.G (03/19) PulseJack™ 1x1 Tab-UP RJ45 JP Series Electrical Schematics JP011 1 TD- 3 2 TX- 1CT:1 TRANSMIT RD+ 6 CT 3 RX+ 8 RD- 4 6 RX- 1CT:1 TRANSMIT PCB SIDE TO PHY CT TD+ 2 1 TX+ CABLE SIDE PCB SIDE TO PHY TD+ 2 CT 1 TD- 3 1 TX+ 2 TX1CT:1 TRANSMIT 3 RX+ RD+ 4 CT 6 RD- 5 6 RX- 1CT:1 TRANSMIT 4 75 75 4 CABLE SIDE JP006 5 75 5 7 7 SHIELD Note: Connect CHS GND to PCB ground. JP026 TD- 3 2 TX- 1CT:1 TRANSMIT RD+ 4 CT 3 RX+ CABLE SIDE PCB SIDE TO PHY 1 6 RD- 5 1CT:1 TRANSMIT 75 75 75 6 RX4 Standard LED Wavelength Forward* V (MAX) (TYP) 5 Yellow Green Orange 585 nm 565 nm 610 nm 2.5 V 2.5 V 2.5 V 2.1 - 2.2 V 2.1 - 2.2 V 2.1 - 2.2 V 7 0.001 µF SHIELD Note: Connect CHS GND to PCB ground. 1 TX+ TD+ 2 CT 8 75 0.001 µF 8 75 8 * With a forward current of 20 mA Note: Connect CHS GND to PCB ground. For More Information: Americas - prodinfonetworkamericas@pulseelectronics.com | Europe - comms-Apps-Europe@pulseelectronics.com | Asia - prodinfonetworkapac@pulseelectronics.com Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. © Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 5 Networking.PulseElectronics.com J402.G (03/19)