LP25-1000K

TEMPERATURE SENSITIVE METAL FILM RESISTORS TC’S FROM +150 TO +7000 PPM RESISTORS CAPACITORS COILS DELAY LINES MLP SERIES +155°C MELF LP SERIES +155°C AXIAL LPT SERIES +300°C AXIAL FEATURES RoHS Term.W is RoHS compliant & 260°C compatible Linear positive temperature coefficients: LP & MLP temperature sensitive resistors feature linear positive T.C.’s in a wide range of R/T slopes. The series was developed as a low cost substitute for wirewound sensors. Various temperature coefficients are obtained by adjusting the film composition. LPT features platinum film for improved linearity, interchangeability and +300°C operating temp. Small sizes result in fast response times, typically 6 seconds for LP/MLP12 & LPT, 9 seconds for LP/MLP25 (in still air). H L d D Economically priced PTC sensors Wide resistance range: 1.5Ω - 100K High stability, excellent linearity Standard tolerance: ±5% (1%1, 2%, 10% available) Marked with color bands or alpha-numeric Resistance value is measured at 25°C (0°C available) Flat chip available, refer to FLP series STANDARD TEMPERATURE COEFFICIENTS (Boldfaced items indicate most popular TC’s) TC R * TC R * (ppm/°C) Tolerance 150 250 350 450 550 650 750 850 950 1000 1200 1400 1600 1800 2000 2200 2500 3000 3300 3600 4000 4500 5000 7000** 1 Inch [mm] Standard Resistance Range LP12 & MLP12 LP25 & MLP25 TYPE LP 12 LP 25 LP T L ±.031 [.8] .140 [3.56] .270 [6.86] .157 [4] D ± .02 [.5] .064 [1.6] .090 [2.3] .064 [1.6] d ± .003 [.08] .020 [.5] .024 [.6] .018 [.46] H Min. 1.00 [25.4] 1.18 [30] 1.00 [25.4] ±50 ppm/°C 51Ω - 51K Ω 51Ω - 51K Ω 51Ω - 51K Ω 51Ω - 51K Ω 51Ω - 51K Ω 51Ω - 43K Ω 51Ω - 43K Ω 51Ω - 43K Ω 51Ω - 43K Ω 51Ω - 27K Ω 51Ω - 27K Ω 51Ω - 27K Ω 51Ω - 10K Ω 51Ω - 10K Ω 51Ω - 9.1KΩ 51Ω - 9.1KΩ 100Ω - 100K Ω 100Ω - 100K Ω 100Ω - 100K Ω 100Ω - 100K Ω 100Ω - 100K Ω 100Ω - 82K Ω 100Ω - 82K Ω 100Ω - 82K Ω 100Ω - 82K Ω 100Ω - 51K Ω 100Ω - 51K Ω 100Ω - 51K Ω 100Ω - 27K Ω 100Ω - 27K Ω 100Ω - 22K Ω 100Ω - 22K Ω 100Ω - 22K Ω 20Ω - 10K Ω 20Ω - 10K Ω 1.5Ω - 10KΩ 1.5Ω - 10KΩ 10Ω - 10K Ω 10Ω - 10K Ω 10Ω - 10K Ω TYPE MLP12 MLP25 W L t D Inch [mm] ±10% L±.01 [.25] .135 [3.4] .225 [5.7] D±.008 [.2] .057 [1.45] .085 [2.15] W (Min.) .012 [.3] .020 [.5] t (Max.) .006 [.15] .008 [.2] PERFORMANCE LP25 & MLP25 LP T +150~ TC (25 - 65°C) +3500ppm/°C +5000ppm/°C Resis. Range 1.5 ohm to 100K 10 to 500 ohm Wattage @25°C 1/4W 1/16W Voltage Rating 250V 150V Operating Temp. -55°C to +155°C -55°C to +300°C Derating >25°C .77%/°C (W&V) .364%/°C (W&V) Thermal Diss. 4.5mW/°C 2mW/°C 1000-hr Load Life 1.0% Max. 0.5% Max. 1 Year Shelf Life 0.3% Max. 0.2% Max. High Temp. ±1% after ±0.5% after Exposure 1000hrs@125°C 1000hrs@150°C ±0.5% 0~100°C ±0.5% 0~100°C ±0.2% 0~100°C Linearity ±0.5% -50~150°C ±1.5% -50~150°C ±1.5% -50~150°C ±1.5% -50~300°C LP12 & MLP12 +150~ +5000ppm/°C 10 ohm to 51K 1/8W 150V -55°C to +155°C .77%/°C (W&V) 2.5 mW/°C 1.0% Max. 0.3% Max. ±1% after 1000hrs@125°C ±5% 51Ω - 9.1KΩ 10Ω - 5.1KΩ 10Ω - 5.1KΩ 10Ω - 5.1KΩ 10Ω - 3.3KΩ 10Ω - 680Ω 10Ω - 680Ω P/N DESIGNATION: ±10% LP25 - 101 - J T 151 W RCD Type (LP12, MLP12, LP25, MLP25,LPT) Resis.@25°C 2 : If ≥2% tol. use 2 signif.figures &multiplier, (1R0=1Ω, 100=10Ω, 101=100Ω, 102=1K, 103=10K, etc.); If ≤1% tol. use 3 signif. digits & multiplier (1R00=1Ω, 10R0=10Ω, 1000=100Ω, 1001=1K, 1002=10K, 1003=100K) Tolerance: F=1%, G= 2%, J= 5% (std), K=10% Packaging: B = Bulk, T = Tape & Reel TC: Use 3-digit code (151=150ppm, 102=1000ppm, 452=4500ppm) Termination: W=Pb-free, Q=SnPb (leave blank if either is acceptable) 1% tol avail in limited resis.range 2 LPT resis. may also be specified at 0°C (e.g. “101@0”, “1001@0”) * T.C. measured at 25°C and 65°C. ** 7000 ppm parts are marked alphanumerically. Operating temp. range is -65 to +125°C, resis. tol. is 5% or 10%, hermetically sealed silicon RCD Components Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com FA089A Sale of this product is in accordance with GF-061. Specifications subject to change without notice. 84