HVM5

HVM5 THRU HVM16 HIGH VOLTAGE ASSEMBLIED RECTIFIER VOLTAGE RANGE 5000 to 16000 Volts CURRENT 0.35 Amperes FEATURES * * * * * * Low cost Low leakage Isolated case Surge overload rating - 50 amperes peak Mounting position: Any Low forward voltage drop HVM MECHANICAL DATA φ1.2±0.03 * Epoxy : Device has UL flammability classification 94V-0 7.3±1.0 8.1±1.0 3.0±1.0 φ7.5±1.0 φ4.2±1.0 φ7.5±0.5 3.9±1.0 16.5±1.0 15.0±1.0 15.6±1.0 8.8±1.0 22±0.5 32.5±2.5 30.5±2.5 MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in millimeters o MAXIMUM RATINGS (At T A = 25 C unless otherwise noted) SYMBOL HVM5 HVM8 HVM10 HVM12 HVM14 HVM15 HVM16 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 5 8 10 12 14 15 16 K Volts Maximum RMS Voltage VRMS 3.5 5.6 7.0 8.4 9.8 10.5 11.2 K Volts Maximum DC Blocking Voltage VDC 5 8 10 12 14 15 16 K Volts RATINGS Maximum Average Forward Rectified Current at T A = 50 oC Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Current Squarad Time Operating and Storage Temperature Range IO 350 mAmps I FSM 50 Amps I2t 10.37 A2/Sec T J, T STG -20 to + 150 0 C o ELECTRICAL CHARACTERISTICS (At TA = 25 C unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.35A DC Maximum DC Reverse Current at Rated DC Blocking Voltage NOTES:1. Enough heat sink must be considered in application. o o 2. Operating and Storage Temperature : -20 C to +150 C 3. Suffix “ L “ for Wire type. SYMBOL HVM5 VF 8.0 IR HVM8 HVM10 HVM12 HVM14 14.0 5.0 HVM15 HVM16 UNITS Volts uAmps 2 018-12 REV: E 500 Single Phase Half Wave 60Hz Inductive or Resistive Load 400 300 200 100 0 0 50 100 150 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 60 50 8.3ms Single Half Sine-Wave (JEDEC Method) 40 30 20 10 0 1 175 AMBIENT TEMPERATURE, ( ) FIG. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 6 4 2 1.0 .06 .04 .02 .01 TJ = 25 .006 .004 .002 .001 0 1000 100 HV M5 INSTANTANEOUS FORWARD CURRENT, (mA) INSTANTANEOUS REVERSE CURRENT, (mA) FIG. 3 - TYPICAL REVERSE CHARACTERISTICS 10 10 100 NUMBER OF CYCLES AT 60Hz HV M8 ~H VM 16 FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (mA) RATING AND CHARACTERISTIC CURVES ( HVM5 THRU HVM16 ) 10 TJ = 25 1.0 Pulse Width = 300us 1% Duty Cycle 0.1 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) 5 7 6 8 9 10 11 12 13 14 INSTANTANEOUS FORWARD VOLTAGE, (V) RECTRON Attachment information about HVMXX 1. Internal Circuit Anode Cathode 1)Power Frequency Series: 01-------350 mA 04-------500 mA CL01 2)High Frequency Series: 03-------300 mA 08-------500 mA - 12 10-------10000V 12-------12000V 15-------15000V RG7XX Year – code (Y: Last digit of year & 7:2017, 8:2018…..) Number of days 1 5 ... ... 6 10 ------------------------- 2. Marking on the body Cathode Band Month – code (01,02.....10,11,12) Number of month The first ten-day period of a month The middle ten-day period of a month The last ten-day period of a month DISCLAIMER NOTICE Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on RECTRON data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rectron Inc and its subsidiaries harmless against all claims, damages and expenditures.