R2000F

RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION R1200F THRU R2000F HIGH VOLTAGE FAST RECOVERY RECTIFIER VOLTAGE RANGE 1200 to 2000 Volts CURRENT 0.2 to 0.5 Ampere FEATURES *Fast switching *Low leakage *High current capability *High surge capability *High reliability DO-41 MECHANICAL DATA * * * * * Case: Molded plastic Epoxy: Device has UL flammability classification 94V-O Lead: MIL-STD-202E method 208C guaranteed Mounting position: Any Weight: 0.35 gram .034 (0.9) DIA. .028 (0.7) 1.0 (25.4) MIN. .205 (5.2) .166 (4.2) .107 (2.7) .080 (2.0) DIA. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1.0 (25.4) MIN. Dimensions in inches and (millimeters) MAXIMUM RATINGS (At T A = 25 oC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Volts Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at T A = 5 0 oC Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Operating and Storage Temperature Range SYMBOL VRRM VRMS VDC IO I FSM T J , T STG R1200F 1200 840 1200 R1500F 1500 1050 1500 500 30 -55 to + 150 R1800F 1800 1260 1800 R2000F 2000 1400 2000 200 UNITS Volts Volts Volts mAmps Amps 0 C ELECTRICAL CHARACTERISTICS (At TA = 25oC unless otherwise noted) CHARACTERISTICS Maximum Instantaneous Forward Voltage at 0.5A/0.2A DC Maximum DC Reverse Current at Rated DC Blocking Voltage TA = 2 5oC Maximum Full Load Reverse Current Average, Full Cycle .375”, (9.5mm) lead length at TL = 5 5oC Maximum Reverse Recovery Time (Note) NOTES : Test Conditions: IF = 0.5A, IR = -1.0A, IRR = -0.25A trr SYMBOL VF IR 100 500 uAmps nSec 2002-12 R1200F R1500F 2.5 5.0 R1800F R2000F 4.0 UNITS Volts uAmps RATING AND CHARACTERISTIC CURVES ( R1200F THRU R2000F ) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (mA) FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 70 60 50 40 30 20 10 0 1 10 NUMBER OF CYCLES AT 60Hz 100 8.3ms Single Half Sine-Wave (JEDEC Method) 500 400 300 Single Phase Half Wave 60Hz Inductive or Resistive Load 2 R1 00 8 R1 F~ 200 R2 00 0F 00 F 100 0 0 50 100 150 175 ) AMBIENT TEMPERATURE, ( FIG. 3 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 50 NONINDUCTIVE 10 NONINDUCTIVE trr +0.5A (+) 25 Vdc (approx) (-) D.U.T (-) PULSE GENERATOR 0 -0.25A (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 1 NOTES: Rise Time = 7ns max. Input Impedance = 1 megohm. 22 pF. 2. Rise Time = 10ns max. Source Impedance = 50 ohms. -1.0A 1cm SET TIME BASE FOR 50/100 ns/cm RECTRON