L-14812

High Swing Inductors Single Layer Wound Leads are Pre-Tinned Shrink Tubing Optional Varnish Finish Optional Custom Versions Available Vertical Base Mounting Available L (1) Typ. (mH) IDC (2) 10% (mA) IDC (2) 20% (mA) IDC (2) 30% (mA) IDC (2) 40% (mA) IDC (2) 50% (mA) Well Suited for Switch Mode Power Supplies and other applications requiring large changes in Inductance vs. large changes in Current Composite Material 2/3 Hydrogen Reduced Powdered Iron and 1/3 Power Ferrite From 10:1 to greater than 20:1 Inductance Swing From Zero to Maximum Current IDC (2) 70% (mA) IDC (2) 90% (mA) IDC (2) 95% (mA) Lead Size AWG I (3) Max. (mA) DCR Nom. (Ω) Part Number Size Code L-14800 L-14801 L-14802 L-14803 L-14804 L-14805 L-14806 L-14807 L-14808 L-14809 L-14810 L-14811 L-14812 L-14813 L-14814 L-14815 L-14816 L-14817 L-14818 L-14819 L-14820 L-14821 L-14822 L-14823 L-14824 7.13 4.51 2.69 1.70 1.02 16.30 12.52 8.07 5.14 3.13 22.33 14.42 9.23 5.71 3.45 35.26 27.45 22.23 13.71 8.61 40.40 35.56 31.43 19.60 12.25 4.0 5.0 6.5 8.2 10.6 5.3 6.0 7.5 9.4 12.0 6.1 7.7 9.6 12.2 15.7 8.8 10.0 11.1 14.1 17.8 11.6 12.4 13.2 16.7 21.1 6.0 7.5 9.8 12.3 15.9 7.9 9.0 11.2 14.1 18.1 9.2 11.5 14.3 18.2 23.5 13.2 14.9 16.6 21.1 26.7 17.4 18.6 19.8 25.0 31.7 8.0 10.1 13.0 16.4 21.2 10.6 12.0 15.0 18.8 24.1 12.3 15.3 19.1 24.3 31.3 17.6 19.9 22.1 28.2 35.5 23.2 24.8 26.4 33.4 42.2 10.0 12.6 16.3 20.5 26.4 13.2 15.0 18.7 23.5 30.1 15.4 19.1 23.9 30.4 39.1 22.0 24.9 27.6 35.2 44.4 29.1 31.0 32.9 41.7 52.8 14.0 17.6 22.8 28.7 37.0 18.5 21.1 26.2 32.9 42.1 21.5 26.8 33.5 42.5 54.8 30.7 34.8 38.7 49.3 62.2 40.7 43.4 46.1 58.4 73.9 24.0 30.2 39.1 49.1 63.5 31.7 36.1 45.0 56.4 72.2 36.9 45.9 57.4 72.9 93.9 52.7 59.7 66.3 84.5 106.6 69.7 74.3 79.1 100.1 126.7 80 101 130 164 212 106 120 150 188 241 123 153 191 243 313 176 199 221 282 355 232 248 264 334 422 600 754 976 1228 1587 791 903 1125 1409 1806 922 1148 1435 1823 2348 1317 1493 1659 2113 2666 1744 1858 1977 2503 3167 36 34 32 30 28 34 32 30 28 26 32 30 28 26 24 30 28 26 24 22 28 26 24 22 20 335 478 680 969 1380 478 680 969 1380 2000 680 969 1380 2000 2810 969 1380 2000 2810 4000 1380 2000 2810 4000 5700 3.50 1.75 0.83 0.41 0.20 3.00 1.63 0.81 0.40 0.19 3.00 1.49 0.74 0.36 0.17 3.10 1.70 0.95 0.46 0.23 2.20 1.28 0.75 0.37 0.18 10 10 10 10 10 11 11 11 11 11 12 12 12 12 12 13 13 13 13 13 14 14 14 14 14 Y 1) Typical Inductance with no DC. Tolerance of +30% / -20% Request detailed data sheets for specific test conditions. 2) Current which will produce the specified percentage reduction in Inductance. 3) Maximum DC current. This value is for a 40OC temperature rise due to copper loss. Where IMAX is greater than IDC @90%, the Inductors can be used for Swing Requirements producing a minimum Swing of 10:1. Where IMAX is greater than IDC @95%, the Inductors can be used for Swing Requirements producing a minimum Swing of 20:1. Specifications are subject to change without notice Bare Coil Size Chart Size Code Dim. in inches X Y 10 11 12 13 14 0.575 0.910 1.100 1.600 2.100 0.345 0.470 0.550 0.700 0.860 X Dimensions are nominal, based upon largest wire size used with each toroid size. Smaller wire will result in slightly lower dimensions. SML-CMP - 5/97 Rhombus Industries Inc. Transformers & Magnetic Products 8 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 l FAX: (714) 896-0971